Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SUB-HEAD I-SITC OF 11 KV VCB PANEL & 11/0.433 KV TRANSFORMERS & MAIN PANELSupply & Delivery of IndoorType Oil Immersed Distribution Transformers 11KV/433V, 400 KVA, 3 Phase, 50Hz, Dyn11, copper wound, ONAN cooling, Class A insulation, energy efficiency Level 2, Off circuit tap Changing Arrangement on HV [email protected]%, +5% to -10%. , having cable end box in the HV & LV sides suitable for 3 Crore300 Sq. mm. XLPE cable of 11 kV grade on HT side and 03 nos 4 Core 240 sq. mm in LV side and all accessories and conforming to IS 1180-2014 & IS - 2026 with latest modification (if any) & CBIP Specification and as per detail specification attached (uploaded in the specification section)[Make: ABB/Voltamp (Vadodara)/CGL]. |
| 2 | Installation & commissioning of 11KV/433V 400 KVA indoor Type Oil Immersed Distribution Transformers including carriage to the substation building within a lead of 30mtr by placing in position and fixing after leveling fitting all components, connecting, checking & set of all instrument, relays according to requirement as instructed by the EIC incl. S&F base channels etc. |
| 3 | Supply & Delivery Indoor-type, floor mounted, metal clad, single tier, fully compartmentalized,free standing, 11 kV VCB Panel with 3 Nos 630 A VCBs (1 Incomer + 2 Outgoing), IAC for 25 kA for 1 sec, totally enclosed and fully interlocked, horizontal drawout, horizontal/vertical isolation type breaker as per IS 13188, as ammended upto date and as per detail specification attached (uploaded in the specification section), suitable for use on 11 KV, 3 Phase,50 Hz AC supply to energise 2 nos 400 KVA Dry Type Transformers. [Make: ABB/Siemens/CGL]. |
| 4 | Installation & commissioningofthe above 11 kV VCB Panelwith P.T & all the accessories,incl. carriage, by placing in position, assembling, lining up, levellingandchecking all instruments, relays, correctly set according to requirement. |
| 5 | Making testing arrangement and submitting the test report for high voltage testing of specified voltage incl. checking & testing of all HT / LT equipments by authorized firm of Directorate of Electricity & commissioning the installation after obtaining the Approval of Directorate of Electricity. The scope shall be also included the necessary approval from Authority also. |
| 6 | SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG (2.0 mm) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming ACBs & Outgoing SFU open execution type and all accessories as per size,design & drawing to be approved by EIC and conforming to ISwith latest modification and as per detail specification attached (uploaded in the specification section) [LT MAIN PANEL IN THE SUBSTATION]Incomer: 800 A ACB 50KA - 2 nosBus Coupler: 800 A ACB 50KA - 1 noOutgoing:315 A SFU - 04 nos, 250 A SFU - 01 nos, 200 A SFU - 01 nos, 125 A SFU - 01 nos, 63 A SFU - 03 nos |
| 7 | SUB HEAD II - HT/ LTCABLING IN SUBSTATIONSupplyingof 3 Core x 300 Sq.mm11KV (UE) GradeXLPE Aluminium conductor, PVC sheathed, armoured cable conformingto IS 7098, of earthed system of following size.[From Supplier HT Gear to Consumer HT Gear and to Transformer]. (Make: As per uploaded approved Make List) |
| 8 | Layingof 1 No. 3 core 300 sqmm 11KV (UE) GradeXLPE Aluminium conductor, PVC sheathed, armoured cable confirmingto IS 7098, of earthed system in the existing MasonaryOpen Duct as required. |
| 9 | Makingheatshrinkablejoints indoor type to the ends of 3 core 300 sq.mm.XLPE HT cable of 11 KV at the transformer end as well as at the VCB ends supplying with necy. jointing kits (Raycham), sockets, sleeves, anti-corrossive paste, wires, solders, jointing compounds, rubber sheets etc. incl. supplying of necy. tools & tackeles for crimping the end sockets, soldering irons & making of glands at the both end of the cable as per directions of EIC. |
| 10 | Supply & Delivery of 1.1 KV grade XLPE insulated. PVC sheathed, steelArmoured Al. conductorCable of the following size,and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984 / 3975:1970 /8130:1984/ 3961:1967/ 10418:1982 / 10810:1984 asamended upto date, in respect of component materials and tests, and as per the approved makes list (as uploaded seperately).4Core 240 Sq. mm |
| 11 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below including finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.4Core 240 Sq. mm |
| 12 | Laying of one cable above 150 sqmm and upto 300 sqmm 1.1KV GradeXLPE Aluminium conductor, PVC sheathed, armoured cable in the existing MasonaryOpen Duct as required. |
| 13 | Supply & Drawing 1.1 KV Grade 7 Core 1.5 sq.mm PVC Armoured Copper Cable from Transformer WT relay to VCB WT relay for Power & Control Supply as per direction of EIC |
| 14 | Supply & Drawing 1.1 KV Grade 2 Core 2.5 sq.mm PVC Armoured Copper Cableas per direction of EIC |
| 15 | SUB HEAD III - SUB STATION EARTHINGEarthing with Copper plate (610x610x3mm size)(As per details specification uploaded in the specification section)[FOR TRANSFORMER NEUTRAL EARTHING] |
| 16 | Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts |
| 17 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe |
| 18 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe |
| 19 | Extra treatment of soil by using salt & charcoal for plate electrode as to G.S. |
| 20 | Supply & fixing earth busbar of galvanized (Hot dip) MS flat 65 mm x 8 mm on wall having clearence of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 21 | Insulating the 65 x 8 mm M.S. flat incl. S&F black heat shrink PVC sleeves etc. The PVC tube sleeve to be inserted on the GI flat and heat shrinked by heating apparatus by skilled technician carefully without damaging the PVC sleeve as per direction of the EIC. |
| 22 | S& laying 240 sq. mm. single core multistrand PVC insulated flexible Cu wirein suitable size of PVC flexible pipe (reinforced) from nutral earth busbar to transformer point as required (for Transformer /Generator neutral earthing) including Socketing both sides by Cu Socket. |
| 23 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 24 | Connecting the equipments body to earth busbar including S & F 50 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. |
| 25 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. |
| 26 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size 4SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages |
| 27 | SUB HEAD - IV (SAFETY EQUIPMENT)Providing & fixing danger plates made of mild steel at least 2mm thick & vitreous enameled white on both sides & with inscription in signal red colour on front side as required.(a) High Voltage - size 250mm x 200mm |
| 28 | Do----Do----Do(b) Medium Voltage - size 200mm x 150mm |
| 29 | Providing and fixing carbon dioxide (CO2) type fire extinguishers conforming to IS 15222 & IS 15683 (with latest modification) and cylinders fully charged of following capacity (4.5 Kg) [Make - Fire Shield/Ceasefire] |
| 30 | Supply and fixing of foam fire extinguishers conforming to IS 4989-2006, Portable type 9 lit capacity hanged on wall with bracket complete as required. [Make - Fire Shield/ Ceasefire] |
| 31 | Supply and fixing safety instruction chart in word duly framed with 5mm thick glass as required (approx. Front area 1.20 sq.mt.) |
| 32 | Providing of set of 4 nos. 9.5 litre capacity GI bucket painted in post office red colour with prior coat of red-oxide paint and written with white paint \"FIRE\" and mounted on MS angle iron frame with bracket and suitable base of appropriate size & capacity I/c filling sand etc. |
| 33 | Providing First Aid Box as approved by St. John Ambulance Brigade / Indian Red Cross conforming to IS 13115-1991. |
| 34 | Supply and fixing shock treatment chart duly mounted on a wooden frame with 5mm thick glass as reqd. (approximate front area 1.20 sq.metre). |
| 35 | Providing of rubber mat2 mtrs Length x 1 m. wide and 12mm thick to withstand 15 KV dielectric strength as per IS 15652-2006. |
| 36 | Providing of rubber mat 2 mtrs Lengthx 1 m. wide and 6mm thick to with stand 3.3 KV dielectric strength as per IS 15652-2006. |
| 37 | S&F 11kv grade Rubber Hand Gloves. |
| 38 | Supply of Earth Discharge Rod as per standard norms |
| 39 | SUB-HEAD V--DISTRIBUTION WIRING OF SUB STATION BUILDINGSupplying and fixing double door 4 way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment including Supplying and fixing the followingon din rail of DBs and necessary connectionINCOMING-415V 63A FP MCB Isolator-1 No. OUTGOING-240V 6-32A SP MCB of Breaking capacity 10kA & C characteristics -12 Nos.Blank Plate- 0 nos.(Make: As per uploaded approved Make List) |
| 40 | Supplying and fixing double-door (10+2) way SPN MCB Distribution Boardwith IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment including Supplying and fixing the followingon din rail of DBs and necessary connectionINCOMING- 240V 40A DP MCB Isolator-- 1 Nos.OUTGOING-Supplying and fixing 240V 6-16A SP MCB of Breaking capacity 10kA & C characteristics --10 Nos. (Make: As per uploaded approved Make List) |
| 41 | Supply & Laying of 1.1 KV grade alluminium XLPE armoured LT cable after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish(Make: As per uploaded approved Make List) |
| 42 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE /PVC armoured cables of following size.(i) 4 core 25 sqmm |
| 43 | Finishing the end of XLPE/ PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :i) 4 core 25 sqmm |
| 44 | Supplying and Drawing 1.1 KV grade, single core stranded, \"FR\", P.V.C. insulated & unsheathed copper wires (approved make list, as uploaded seperately) of the following sizes in prelaid polythene pipe and by theG.I. fish wire and making necy. Connections as required.3 x 22/0.3 (1.5 sqmm) as ECC |
| 45 | Do----Do----Do2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC |
| 46 | Do----Do----Do2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC |
| 47 | Do----Do----Do2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC |
| 48 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.(i) 2.5sqmm |
| 49 | Do----Do----Do(ii) 4 sqmm. |
| 50 | Do----Do----Do(iii) 6 sqmm |
| 51 | Cutting channel of 40 mm x 40 mm size on masonry wall incl.S&F heavy gauge polythene pipe dia as stated below, bymeans of iron hooks and supplying and drawing 18 SWG GIWire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire |
| 52 | Supplying and fixing PVC Rigid Conduit \"FR\" [Precision Make]on wall, ceiling with saddles and other accessories as requiredand mending good damages to building works.20 mm size |
| 53 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.175 mm x 100 mm x 65 mm |
| 54 | Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws175 mm x 100 mm x 65 mm |
| 55 | Supplying & Fixing MS fan clam of two piece type for RC ceiling asper approved specification, fabricated from 40 mm x 9 mm MS flatincluding making good damages to building roof with satisfactoryfinishing and painting – (As per Drawing no. 475 of PWDSpecification Book – May 1991) |
| 56 | Supply & Fixing 240 V, 20 A Piano key type switch(Brand approved by EIC) on sheet metal switch boardincl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cuttingbakelite/perspex cover and making necessary connections as required |
| 57 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch(Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(Seperate 20A) |
| 58 | Supply & FixingSocket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. |
| 59 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make as per approved make list , as uploaded seperately) partly in 20mm size PVC rigid conduit \"FR\" (Make as per approved make list , as uploaded seperately) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment,painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]Average Run 8 mtr |
| 60 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Make as per approved make list , as uploaded seperately) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish2x22/0.3 (Ph. & N) and 1x22/0.3 as ECCON Board |
| 61 | Supply ofsingle LED light fittingcomplete with driver and all accessories incl. supply of 1 nos T-8 LED Tube light. (Make :Philips TMC 501 P 1xT-LED 22W P3241 (Fittings)/ Essential LEDtube 1200mm 20W865 T8 IND I – 2100lm (LED tube) /equivalent product of Crompton/Wipro having similar specification in all respect) |
| 62 | Supply of 240V 50 Hz,20W LED street light luminaire having CCT-5700K ,CRI>70, ingress protection IP-65 (make-Philips, cat no-BRP 042 LED19 CW MR S1 PSU GR /equivalent product of Crompton/Wipro having similar specification in all respect) |
| 63 | Supply and fixing of 240V, 9 Watt LED light bulbhaving colour temperature of 3000K and lumen output of 1000 lm.(base B22)(Make- Philips (Stellar bright) /equivalent product of Crompton/Wipro having similar specification in all respect) |
| 64 | Supplying of240 V, 68W,320 rpm 1200 mm. Sweep AC Ceiling Fan ( as per Orient make SUMMERCOOL) complete with blades, canopy, fork, ruber bush etc. but without regulator (Make: Crompton/Orient/Usha) |
| 65 | Supply of 250 V. 225 mm sweep medium duty A.C. Exaust fan having rpm 1350, air displacement -865 M3/hr approax consumption of watt no more than 60W.(make E.P.C./Orient/Crompton). |
| 66 | Supply of 250 V. 450mm (18\") sweep heavy duty A.C. Exaust fan having rpm 920 ,air displacement - 4000 M3/hr and power consumption not more than 150 W .(Make-E.P.C./Orient /Crompton) |
| 67 | Fixing only single/twin LED light fitting directly on wall with “z” type MS clamp whose one side fixed on wall with sutable size z nos. fastener and other side connectedwith the luminairewith suitable size of bolts and nuts incl. S&F“z” type MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by2x24/0.20 mm (1.5sqmm.) flexible copper wire of required. length. |
| 68 | Fixing only outdoor / street light LEDlight fitting or MV light fitting complete with allaccessories to be fixed /projected from the wall of the building incl. making holes/providing clampingarrangement & necy. GI reducer as required. S&F 32 mm GI pipe (ISI-Medium) quality 0.5 mts.average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 69 | Fixing only ceiling fan complete with blades, canopy, fork, rubberbush etc. incl. S&F connecting wire for down rod upto 30 cm incl.painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire. |
| 70 | Fixing only exhaust fan after making hole in wall and making gooddamages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire andmaking connection for exhaust of following diameter:23 cm (9\") |
| 71 | Do----Do----Do45 cm (18\") |
| 72 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mmdia x 62 mm long)(Al)23 cm Exhaust fan (9\") |
| 73 | Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long)45 cm Exhaust fan (18\") |
| 74 | Supply & Fixing Timer for controlling of exhaust fan fixed on wall in MS Box with top coverand make necessary connection by S&F of FRLS cu wire as required (L&T Micon225/equivalent Legrand). |
| 75 | Supply & Fixing of timer BoxinSS double door phosphatised powder coated 8 way SPN DB with neutral bar, din rail with IP-43 protection with electrical accessories & front door locking arrangement , earthing attachment on wallconsisting of the following items including necessary interconnectionby suitable size of 1.1KV. Grade standared PVC insulated Copper wire ( Fire Retarant) and suitable AUTO/ MANUAL arrangement.a)Double door (2+8) way SPN DB ----1nob)DIN mounted analog time switch with daily & weekly programmable basis , min switching time 1 min, 25 ON/OFF programs,6 yrs. Battery backup, settable DST & key pad lock features.c)DIN Mounted Two pole Power contractor (MU 25-2P) with 250V, magnetic coil with two pole having one NO & one NC contact,d) 32A DP MCB(10kA, C curve)—1no, MCB housing should be thermostat materials( fire retardant).e) One no. RED,240V, LEDindicator for indicating AUTO/ BYPASS indication---1 setf) Toggle switch -- 1no |
| 76 | Supplying & Fixing SS waterproof type looping cable box size 200x150x100 mm deep having 3 mm thick comprising of three phase stud type power terminal along with fuse, neutral link and having lined with rubber gasketted SS top coverwith brass machine screws etc., earthing terminal with lug, on wall, including S&F with fast nuts angle frame etc. including painting with anticorrosive paint. |
| 77 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – As per Drawing no. 470 of PWD SpecificationBook – May 1991)4 bars, 415V, 415A Cu Bars (50 mm x 5 mm)Dimension of sheet steel metal Box -500mm x 150 mm |
| 78 | Supply & Delivery of 1.1 KV grade XLPE insulated. PVC sheathed, steel Armoured Al. conductor Cable of the following size,and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/5831: 1984/3961(Part-I):1967/3975:1970/10810:1984/3975:1970/8130:1984/3961:1967/10418:1982/10810:1984 as amended upto date, in respect of component materials and tests, and as per the approved makes list (as uploaded seperately).4 core 25 sqmm |
| 79 | Do----Do----Do4 core 70 sqmm |
| 80 | Do----Do----Do4 core 95 sqmm |
| 81 | Do----Do----Do4 core 120 sqmm |
| 82 | Do----Do----Do4 core 185 sqmm |
| 83 | Do----Do----Do4 core 240 sqmm |
| 84 | Laying of following 1.1 KVgrade alluminium XLPE,armoured and sheated LT cable through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand4 core 25 sqmm |
| 85 | Do----Do----Do4 core 70 sqmm |
| 86 | Do----Do----Do4 core 95 sqmm |
| 87 | Do----Do----Do4 core 120 sqmm |
| 88 | Do----Do----Do4 core 185 sqmm |
| 89 | Do----Do----Do4 core 240 sqmm |
| 90 | Laying of one no 1.1 KV grade alluminium XLPE, armoured and sheated LT cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed (Make: as per approved make list, as uploaded seperately)4 core 25 sqmm |
| 91 | Do---Do---Do4 core 70 sqmm |
| 92 | Do---Do---Do4 core 95 sqmm |
| 93 | Do---Do---Do4 core 120 sqmm |
| 94 | Do---Do---Do4 core 185 sqmm |
| 95 | Do---Do---Do4 core 240 sqmm |
| 96 | Laying of two nos 1.1 KVgrade alluminium XLPE,armoured and sheated LT cable in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. |
| 97 | Laying of three nos 1.1 KVgrade alluminium XLPE,armoured and sheated LT cable in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. |
| 98 | Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. |
| 99 | Do----Do----DoAbove 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. |
| 100 | Laying on Wall / surface with Saddles / clamps.Laying of following cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.4 core 95 sqmm |
| 101 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE /PVC armoured cables of following size.4 core 25 sqmm |
| 102 | Do----Do----Do4 core 70 sqmm |
| 103 | Do----Do----Do4 core 95 sqmm |
| 104 | Do----Do----Do4 core 120 sqmm |
| 105 | Do----Do----Do4 core 185 sqmm |
| 106 | Do----Do----Do4 core 240 sqmm |
| 107 | Finishing the end of XLPE/ PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:4 core 25 sqmm |
| 108 | Do----Do----Do4 core 70 sqmm |
| 109 | Do----Do----Do4 core 95 sqmm |
| 110 | Do----Do----Do4 core 120 sqmm |
| 111 | Do----Do----Do4 core 185 sqmm |
| 112 | Do----Do----Do4 core 240 sqmm |
| 113 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.a) [200x50x1.25mm (18SWG)With 25x25x3mm angle iron support] |
| 114 | Supply & Fixing of perforated GI cable tray tee with perforation notmore than 17.5% suspended from ceiling with two nos. suspenders& 25x25x3mm angle iron for supporting the cross member incl. S&FGI connector, 6mm dia MS suspender, bolts & nuts, steel fasteneretc. as required of the following size. Incl. Al painting of MS support.[200x50x1.25mm (18SWG) |
| 115 | Laying of cable on existing Cable Tray and binding with suitable size GI wire |
| 116 | Supplying & fixing of following medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required.50 mm dia |
| 117 | Do----Do----Do80 mm dia |
| 118 | SUB HEAD-VII PANELS AND OTHER ACCESSORIESG+3 WORKSHOP BUILDING MAIN PANELSITC of LT,Cubicle Type,Floor Mounted , totally enclosed, fully compertmentalizedelectrical control panelsuitable for operation at 415 Volt, 50 Hz,as per size,design & drawing to be approved by EIC. The panel board will be fabricated by CPRI approved panel maker as per detailed specification uploaded in specification Section. I/C- 415V 315/320A MCCB 36kA - 2 Nos, C/O - 315A Manual - 2 Nos, O/G : TPN SFU - 160A- 6 Nos, 100A - 2 nos, 63A - 4 Nos |
| 119 | G+3 WORKSHOP BUILDING MAIN PANELSITC of LT,Cubicle Type,Floor Mounted , totally enclosed, fully compertmentalizedelectrical control panelsuitable for operation at 415 Volt, 50 Hz,as per size,design & drawing to be approved by EIC. The panel board will be fabricated by CPRI approved panel maker as per detailed specification uploaded in specification Section. I/C- 415V 160A TPN SFU - 1 Nos,C/O - 160A Manual - 1no, O/G : TPN SFU - 100A - 2 nos, 63A - 5 Nos |
| 120 | PUMP ROOM PANELSITC of LT,Cubicle Type,Floor Mounted , totally enclosed, fully compertmentalizedelectrical control panelsuitable for operation at 415 Volt, 50 Hz,as per size,design & drawing to be approved by EIC. The panel board will be fabricated by CPRI approved panel maker as per detailed specification uploaded in specification Section. I/C- 415V 250A TPN SFU - 1 Nos,O/G : TPN SFU - 200A - 2 nos, 63A - 2 Nos, 32A - 3 Nos |
| 121 | FEEDER PILLARSITC of Double dooroutdoor type Distribution Feeder Pillar box conformingto Indian Standard IS : 5039-1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply. The pillar box should be fabricated as per size,design & drawing to be approved by EIC. The feeder pillar boxwill be fabricated by CPRI approved fabricator as per detail specification uploaded in specification section. |
| 122 | Supplying and fixing 415V, 200A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc |
| 123 | Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts boltsetc incl. provision for earthing attachmentFor 8 way VTPN |
| 124 | Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting.200A |
| 125 | SUB HEAD - VIII - LIGHTNING ARRESTORS & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1) |
| 126 | Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works |
| 127 | Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work |
| 128 | Making soldered joints between conductor/ conductor & air terminals by 7/10 stranded GI (Hot Dip) wire incl. supply of jointing materials & painting with 2 (two) coats of Bituminous paint |
| 129 | Making soldered joints between conductor/ down pipes / other metallic objects by 7/10 stranded GI (Hot Dip) wire incl. supply of jointing materials & painting with 2 (two) coats of Bituminous paint |
| 130 | Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run |
| 131 | Supply and fixing of Porcelain post insulator (SP65 of ASIAN Electrical and Electronics or as per direction of the EIC) suitablefor passing earth conductor (as approved by EIC) with 2 nos screw on wall and suitable arrangement for fixing of earth continuity flat. |
| 132 | Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required. |
| 133 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA-Medium GI pipe. |
| 134 | Excavation of soft soil for installation of Earth Electrode and filling &ramming. |
| 135 | Supplying & fixing medium gauge 50mm dia GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required in UG trench, drains for 40X6 mm GI Flat. |
| 136 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 137 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 138 | Extra for providing masonery enclosure on the top of the earth electrode of overall size approx 0.54m 0.54 m (1\"-10\" x1\"-10\") outside and approx 46 cm(11-6\") deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 139 | SUB HEAD-IX LUMINARIES & FAN ETC.Supply ofDOUBLE industrial type 4 ft long LED tube light fittings complete with driver and all accessories incl. supply of 2 nos T-8 LED Tube light with aluminium heat sink having lumen output not less than 2100 and colour temperature -6500K as per approval of EIC, (Make - Philips, Model - TMC 501 P 2xT-LED 22W P3242 (Fittings)/Mas LEDtube 1200mm 18W865 T8 I – 2100lm (LED tube) or Crompton / Wipro make having similar specification in all respect) |
| 140 | Supply ofSINGLE industrial type 4 ft long LED tube light fittings complete with driver and all accessories incl. supply of 1 nos T-8 LED Tube light with aluminium heat sink having lumen output not less than 2100 and colour temperature -6500K as per approval of EIC, (Make - Philips, Model - TMC 501 P 1xT-LED 22W P3242 (Fittings)/Mas LEDtube 1200mm 18W865 T8 I – 2100lm (LED tube) or Crompton / Wipro make having similar specification in all respect) |
| 141 | Supply and fixing of Down light fitting Make Philips model - DN 296B LED 15S 3000 PSU WH or Crompton & Wipro make having similar specification in all respect. |
| 142 | Supply and fixing ofRecessed MountedLEDLuminaries Make Philips model - RC380BLED 36S-6500 G5 L60 W60 PSU OD or Crompton & Wipro make having similar specification in all respect. |
| 143 | Supply and fixing2 feet long LED Tube light having luminous flux of not less than 900 lumens & 100 lm/W, cct of 6500k cool white directly on wall with all necessary items as required |
| 144 | Supply and fixing of Recessmounted Square LED Downlighters luminious Make Philips model - DN 097B LED10S 3000 PSU WH or Crompton & Wipro make having similar specification in all respect. |
| 145 | Supply and fixing of Surfacemounted Square LED Downlighters luminious Make Philips model - SM250C LED12S- 6500 PSU WH or Crompton & Wipro make having similar specification in all respect. |
| 146 | Supply and Fixing RecessMounted LED spot /COB luminaire Make Philips type-12 W Sky Spot or COB PRO spot light or Crompton & Wipro make having similar specification in all respect. |
| 147 | Supply and fixing 240V LED 3 module skirting light with white LED ( matt grey finish) including S& F of 3 module Modular switch board with top cover plate for housing the samewhich suits asthetically with the indoor architecture including all accessories and making necy connection as required(Make: legrand (Mylinc)/SIEMENS/MK(HONEYWELL) |
| 148 | Supply and fixing of Bulkhead luminaire Make Philips model - WT202W LED6S CW PSU S2 PC or Crompton & Wipro make having similar specification in all respect. |
| 149 | Supply and fixing of street light luminaire Make Philips model - BRP 042 LED19 CW MR S1 PSU GR or Crompton & Wipro make having similar specification in all respect. |
| 150 | Supply and fixing LED Strip light (for 5 m) with driverhaving CCT of 3000K with all other accessories directly on wall as per instruction of EIC(Make-Philips LED Strip SKY COVE or Crompton & Wipro make having similar specification in all respect) |
| 151 | Supply and fixing Surface mounted cob downlight with gold finish reflector 3000K CCT directly on wall with all accessories as required as per direction of EIC(Make - Jaquar, Cat no-LERSBGO12SW or Philips/Crompton/Wipro make having similar specification in all respect) |
| 152 | Supply and fixing of 240V, maximum 14 Watt LED light bulbhaving colour temperature of 3000K and lumen output of min 1300 lm. (base B22)(Make - Philips/Crompton/Wipro) |
| 153 | Supply & delivery of 250 volt. 48\" (1200 mm) sweep A.C. Ceiling fan having safety wire, P2 type capacitor incl. down rod, canopy & fan blades etc. complete with all accessories (without regulator) & having Double Ball Bearing & Low Noise.[Make - Crompton /Orient /Usha /Make of Similar specification As per Approved Make List] |
| 154 | Supply of250V. 50 Hz. 450 mmWall Fan (As per Orient make- Tornado wall-11 having aerodynamically designed alluminiun blades,downwaard upward tilt adjustment90 deg oscillating type having air displacement of 5060 m3/Hr wattage-90 W(Make :Crompton / Orient / Usha) |
| 155 | Supply of Exhaustfans size 9\"( 225mm ) Speed 1370 RPM complete with all accessories. (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty) |
| 156 | Supply of Exhaustfans size 12\" (300mm) Speed 920 RPM complete with all accessories. (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty) |
| 157 | SUB HEAD-X FIXING OF LUMINARIES & FAN ETC.Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type 125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 158 | Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with Z/U type MS clamp and suitable size MS fastener, Nut-bolt, Ceiling plate, nipples etc. as required |
| 159 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 160 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. |
| 161 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with allaccessories to be fixed /projected from the wall of the building incl. making holes/providing clampingarrangement & necy. GI reducer as required. S&F 32 mm GI pipe (ISI-Medium) quality 0.5 mts.average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 162 | Fixing only ceiling fan complete with blades, canopy, fork, rubberbush etc. incl. S&F connecting wire for down rod upto 30 cm incl.painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire. |
| 163 | Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. |
| 164 | Fixing only exhaust fan after making hole in wall and making gooddamages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire andmaking connection for exhaust of following diameter:23 cm (9\") |
| 165 | Do----Do----Do30 cm (12\") |
| 166 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mmdia x 62 mm long)(Al)23 cm Exhaust fan (9\") |
| 167 | Do----Do----Do30 cm Exhaust fan (12\") |
| 168 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length |
| 169 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (Al)23 cm Exhaust fan (9\") |
| 170 | Do----Do----Do30 cm Exhaust fan (12\") |
| 171 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length. |
| 172 | SUB HEAD-XI - AUDITORIUM LIGHTING AND ASSOCIATED SYSTEMSupply and Fixing of 240 V 25W Recess mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with separate replacable electronic driver compatible for Dali dimmimg.Each luminaire must have a lumen output not less than 2500 lm,CRI>80 ,CCT of 4000K and must with supplied with suitable Dimmable electronic LED driver.(Make - Philips/Crompton/ Wipro) |
| 173 | SITC of digital controller consolehaving suitableDALI Ballast dimming actuator ,Programming gate way ,Logic automation module,suitable power supply module,DLP touch panel ,panel power interface and specific moduled ( atleast 44 module ) distribution boards with proper protection circuitry( like 63 A 4P C type MCB ,TP+N type Surge protector,DP MCB etc) for protection against faults etc required for dimming of the above fittings in groups , sub-groups or individually(all three functions needed) from the stage(control area) as per direction of EICwith 5 years replacement warranty.Agency must depost the connection diagram to the department.(Make - Philips/Crompton/ Wipro) |
| 174 | Supply and fixing of wall light having colour-brushed nickel for metal body and milky white for diffuser,material -plastic diffuser and metal base,lamp base-7 w on dim and 15 w on full brightness, 3000K, Lumen -800lm(full mode)+300 lm (step dimming mode).(make- Philips ( Oriel Next wall light, 34141 Giraffe Dim or Wipro/Crompton make having similar specification in all respect) |
| 175 | Supplying and fixing PVC Rigid Conduit \"FR\" [Precision Make]on wall, ceiling with saddles and other accessories as requiredand mending good damages to building works.20 mm size |
| 176 | Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. |
| 177 | SUB HEAD-XII - STAGE LIGHT AND ASSOCIATED SYSTEMSupply, fitting and fixing of 1000 W PAR light fittings made of CRC sheet metal with matt black colour paint finish with 1000Watts 240V sealed wide beam lamp, barndoor arrangements including lamp, holder, C-clamp for hanging light fittings in all complete. Make : Canara Lights/ Modern Stage Services/ DTS/ Sholite/ Robe/Martin/Osaram/ LDR |
| 178 | Supply, fitting and fixing of 1000 W PAR light fittings made of CRC sheet metal with matt black colour paint finish with 1000Watts 240V sealed narrow beam lamp, barndoor arrangements including lamp, holder, C-clamp for hanging light fittings in all complete.Make : Canara Lights/ Modern Stage Services/ DTS/ Sholite/ Robe/Martin/Osaram/ LDR |
| 179 | Supply, fitting and fixing of 1000 watt halogen acting area light with 4 left barndoor including including 1000 watts halogen lamp, holder, reflector & C-clamp for hanging light fittings in all complete. Make: Canara Lights/ Modern Stage Services/ DTS/ Sholite/ Robe/Martin/Osaram/ LDR |
| 180 | Supply, fitting and fixing of LED PAR: 54 x 3W (12R +18G + 12B + 12W), 15º/30º/45º/60º LED PAR of IP65 rating having life of 30,000 Hrs & deliver 4200 Lumens. The fixture should have capability to work on standby mode, via DMX 512 or integrated sound – 2 light program including fixing accessories such as jack and installation clamp/ bracket. Make : Canara Lights/ Modern Stage Services/ DTS/ Sholite/ Robe/Martin/Osaram/ LDR |
| 181 | Supply, fitting and fixing of 1000 W Fresnel halogen spotfittings made of CRC sheet metal with 150mm dia fresnel lens and spherical aluminium anodized finish reflector, including 1000 watts Bi-pin halogen CP-70 lamp, holder, 4 leaf barndoor arrangement, C-clamp for hanging light fittings in all complete. Make: Canara Lights/Modern Stage Services/DTS/Sholite/Robe/Martin/Osaram/LDR |
| 182 | Supply, fitting and fixing of 1000 W Fresnel halogen spotfittings made of CRC sheet metal with 150mm dia fresnel lens and spherical aluminium anodized finish reflector, including 1000 watts Bi-pin halogen CP-70 lamp, holder, 4 leaf barndoor arrangement, C-clamp for hanging light fittings in all complete. Make: Canara Lights/Modern Stage Services/DTS/Sholite/Robe/Martin/Osaram/LDR |
| 183 | Supply, fitting and fixing of 750 W/575W Profile Spot Light fittings made of CRC sheet metalincluding including 220v HPL 750W / 575W G9.5 Base lamp, holder, Color Temperature: 3200k, Optional Degree: 19°/26°/36°/50°, reflector & C-clamp for hanging light fittings in all complete.Make: Canara Lights/ Modern Stage Services/ DTS/ Sholite/ Robe/Martin/Osaram/ LDR |
| 184 | Supply, fitting and fixing of 500W Cyclorama halogenflood light fittings made of CRC sheet metal with matt black colour paint finish including 500 W halogen tube lamp, holder, reflector and C-clamp for hanging light fittings in all complete. Make: Canara Lights/Modern Stage Services/DTS/Sholite/Robe/Martin/Osaram/ LDR |
| 185 | Supply, Installation of stage light operating console of requisite channel with a features of playback, patching 512DMX channels, VGA monitor port, LCD display, channels control,submasters etc.Make: Zero -88/MA Lighting/SGM/Lightputter/ADB |
| 186 | Supply of 24 KW 6 channel Electronic dimmer pack 19\" rack mounted, each channel of 4 KW with DMX input via 5 pin XLR IN with MCB protection.Make: Canara Lights/Modern Stage Services/DTS/Sholite/Robe/Martin/Osaram/LDR |
| 187 | DMX Controller suitable for the entire stage lighting system considering all with redundancy , Internal libraries, - Programs - Presets - Psychos. It can be mounted in a standard 19\" rack (5 units), but can also be used as a desk-top unit, thanks to the shape of its frame. DMX in/out connector, SMPTE socket for changing memories in sync, independent regulation of scene and preset cross fade times. Audio input and built-in microphone for music sync functions. MIDI in/thru/out connector. Data and memories can be downloaded to a PC. Jack socket for pedal for stepping up/down through memories. Universal AL4 switching power supply included. Make: Zero -88/ MA Lighting/ SGM/ADB/Lightputter |
| 188 | Supply, installation of 72 way patch panel made MS with powder coated paint finish, desk type/ wall mounting 15A jack/top system with M.C.B. protection etc. for the each way of the total stage light system. (custom built). |
| 189 | Supply, installation ofsplitter with a facility of one input and 8 out put with a features to adding with other splitter compatible with DMX signal.Make: Canara Lights/Modern Stage Services/DTS/Sholite/Robe/Martin/Osaram/LDR |
| 190 | Supply installation of Stage light dip box consisting of 2 nos, 15 A Socket with hinge cover. |
| 191 | Supply installation of stage light socket box of GI with top cover consisting of 15 Amp power socket and plug top. |
| 192 | Supply and laying of 14/0.2mm 2 C screened DMX signal cable cu flexible wire through PVC pipe/ cable tray. |
| 193 | Wiring by supply and laying of 3 core PVC sheted 2.5 sq.m. cu flexible wire through PVC pipe/ cable tray from light point to patch panel, Plug socket (Wire - Polycab / Finolex / Hevells. PVC Pipe - Pestoplust / Oriplust with ISI-M). |
| 194 | Supply & fixing of MS constructed Ladder for hanging the light between the wings and follow light with provision for housing of 2/3 Nos. light fittings with height and angular movement. complete in all respect as per direction of Engineer - in -charge. |
| 195 | Supply & fixing of Fixed Light Bar, length 8 mtrmade using 40 NB dual barrel under gone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish and provided with suitable suspender and clamps complete in all respect as per direction of Engineer - in -change. |
| 196 | Testing & commissioning of the complete system as per satisfiction of EIC. |
| 197 | Supply and placement of table and Chair made of 19 mm and 12 mm ply with 1.5mm laminated finish as per approved design of EIC. |
| 198 | SUB HEAD-XIII-MISCELLANEOUS WORKSSupplying and Drawing 1.1 KV grade, single core stranded, \"FR\" , P.V.C. insulated & unsheathed copper wires (approved make) of the following sizes in prelaid polythene pipe and by the G.I. fish wire and making necessaryConnections as required.2 x 22/0.3 (1.5 sqmm) |
| 199 | Do----Do----Do3 x 22/0.3 (1.5 sqmm) as ECC |
| 200 | Distributionwiring in 1.1 KVsingle core stranded \"FR\"PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25/40mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required.2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 201 | Supply & Fixing of perforated GI cable tray (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender with/without angle iron support as per GS100x50x1.25mm |
| 202 | Do----Do----Do150x50x1.25mm |
| 203 | Do----Do----Do300x50x1.25mm |
| 204 | Supply & Fixing of perforated GI cable tray bend as per GS.100x50x1.25mm |
| 205 | Do----Do----Do150x50x1.25mm |
| 206 | Do----Do----Do300x50x1.25mm |
| 207 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit \"FR\" (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed]i) Average run 8 mtr |
| 208 | Do----Do----Do(ii) On Board with S&F Socket& Switch |
| 209 | Supply , delivery and erection of 6 mtr.long S.T. Pole(type-410-SP-21) inCC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole |
| 210 | S & F 1mtr. Long40mm dia GI single armbrackethaving 2 nos. through nut boltswith 6nos. Set screw.(105 degree in horizantal plane) as per design approved by EIC and 4\" diacasting pole cap made.incl necy fixing arrangement required.( pole arm) |
| 211 | S&F cylindrical type pole head suitable for 80 mm dia seamless pipe and should be water proof & fabricated from stell member steel pipe .The cylindrical portion of the pole head which sleep over the pole shall have a length 40 cm approx incl making 225 mm dia cable terminal box the above terminal box welded with sleeve incl. S&F 1 no- 4 Way bakeliteterminal AC /DC make & 1 No 15A fuse base &bridge inside the cylinder portion of header assembly as per direction of EIC. (pole head) |
| 212 | PAINTING THE 9 mtr. LONGS.T. Polewith 2 coats of AL paint OVER ONE COAT OF R/O primer after scraping the surface with emary paper to receive the fresh coat of primer. |
| 213 | Painting thearm-bracket-----do---do------do----do--- |
| 214 | Supplying & Fixing SS waterproof type looping cable box size 200x150x100 mm deep having 3 mm thick comprising of three phase stud type power terminal along ,neutral link,and having lined with rubber gasketted SS top cover with brass machine screws etc., earthing terminal with lug, on wall/angle iron frame, including S&F with fast nuts etc. including painting with anticorrosive paint. |
| 215 | Supply and installation ofIntegral LED floodlight luminaire Make- PhilipsBVP192 LED110 CW HO NB FG GR PSUor Crompton / Wipro make having similar specification in all respect. |
| 216 | Supply and fixing of MS Angle of 25 x 25 x3 not more than 1 m in length projectedfrom the wall/solid structure with four nos of bolts/screws fixed on a suitable base plate required for fixing the angle rigidly on the wall with all other accessories as required. |
| 217 | Supply and fixingdecorative up down luminaire with wall surface mounting with COB LED as light source suitable for outdoor application (IP 65/IP 66) having CRI of 80 and CCT of 3000K ,symmetrical beam,toughened glass diffusermake-Philips/CG/Wipro) |
| 218 | Supply and fixing LED street light luminaires having a wattage of 60 Watt, Lumen output not less than6500( efficacy of 110 lm/w) Colour temperature of 5700K CRI of 70and ingress protection of IP66,which will provide uniformdistribution of lightor producs of Crompton ,Havells,Nordusk having similar specification .(Make- Philips /Crompton/Wipro) |
| 219 | Supply and fixing 12 W Surface light having no less than 840 lm, warm white ,ingress protection IP 65 directly on ceiling with all necesarry arrangements as required. (Make: Philips-all Weather IP65 Surface lights/Wipro/CG) |
| 220 | Supply and laying of 4 core 10 sqmm Al armoured cablesin underground trench 460 mm wide x 760 mm average depth, with brick protection onthe top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed(make-As per uploaded approved make list) |
| 221 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below4 core 10 sqmm |
| 222 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials4 core 10 sqmm |
| 223 | Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)4 core 10 sqmm |
| 224 | Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole |
| 225 | Dismantling steel tubular pole 6 m long embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as instructed |
| 226 | SUB HEAD - XIV - LED SIGNAGELED Signage: Designing, Fabrication, Supply, Installation, Testing & Commissioning of Outdoor LED Signagein English letters with following specifications.(a) The box for the signage will be fabricated in Aluminum Square tube of size 25 mm.X 25 mm. of 16 gauge complete with necessary priming and painting. Thebox will be covered with 3 mm. thick Aluminium Composite Panel (ACP) sheets of the entire board. The board to be fixed in building wall by providing required support and Angle Brackting or as directed by the EIC. The complete installation will be water, vermin and dust insulated and protected.(b) Letter Description: Letters made of imported Aclrylic Sheet with male female attachment, on router cut ACP Sheet of front incl. all accessories as required. [Preview of display to be approved before execution].(c) LED Illumination:High Bright, High Wave length closed type waterproof white LED modules (0.72 W or Higher) mounted on interior side of female part of letter with power wire running back to a central power area with 12 Volt LED Power Transformer to adequately drive the whole LED modules without Flicker.(d) Internal Electrical Wiring will be done by Halogen Free Flame Retardent HRFR compound insulated (Unsheathed) 1.5 Sq.mm. copper flexible cable through interior conduit and Electrical Raceway.(e) Erection the above sign board with adequate MS angle ironrigid fixing arrangement to avoid the uprooting by wind pressure/fallen for own weight etc. and painting as per direction of EIC.Size of LED Signage: 10 ft x 2 ftSubject Matter: WORKSHOP BUILDING [ or As per direction of the EIC] |
| 227 | Do----Do----DoSize of LED Signage: 6 ft x 1.5 ftSubject Matter: AUDITORIUM [ or As per direction of the EIC] N.B: (a) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.(b) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill.(c) If any refurbished material is supplied and installed, penal action will be taken as per existing rules. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
