|
| 1 | Writing Table | Steel writing table of size 1360mm x 750mm x 725mm made of pre laminated particle board 18mm thick wooden teak finish on top, pre laminated particle board edges allaround covered by the PVC tape thickness not less then 2mm with the help of hot melt glue, battom portion is made of powder coated 60 micron MS square hollow Tube (ERW) of size 38mm x 25 mm, 1.2mm thick and Mild steel 25mm dia pipe 1.1mm thick for foot rest. The bottom ends of the four legs of the table to have PVC shoe caps. MS sheet of thickness not less than 0.6 to 3mm tobe used for drawers including locking arrangements and Plastic handle or Pull drawer, overall dimension of the drawer 355mx550mmx150mm comprises with the 03 Nos drawer etc. All steel should not have crack, surface flaws and other defects etc conforming to as per drawing attached. Test reports to be submit by the Vendor before supply and also certified by the \"\"OEM of offerred product is ISO 14001:2015 Certified. ISO 18001:2007 and Green Card certification. Warrantee period of table one Year (Make : Leo steel Industries/Jala Ram Steel Furniture/Evok/Excel Steel Table). |
| 2 | Writing Chair | Revolving writing Chair Ergonomic design cental tilt with arm rest fixed type, upright type locking mechanism, overall chair height 990mm, backrest height 500mm, backrest width 550mm seat height 520mm, seat width 550mm, seat depth 480mm, Arm rest made of proypylene, seat made of PU foam covered with fabric, densicty of PU foam 35 Kg/Cum for seat and back rest, material of fabric back cover/back rest 100% polyester fabric, fabric of GSM 220gram, height adjustment up 100mm, type of back rest support countered lumber supporting. Black colour of fabric for seat and back rest, back rest is made of two pcs injection moulded frame, thickness of MS plate joining the under structure with seat 1mm, thickness of plywood used in seat and back rest 12mm, (padestal size 620mm diameter) Nylon base with Nylon twin caster wheels minimum of 50-70 mm diameter, thickeness of polyurethane Foam used in seat 35mm, thickness of Polyurethane foam used in backrest 50mm. Other visible metal parts and seat base support metal parts should be powder coated with dry film thickness more than 50 microns. The powser coating shall be good quality to ensure good adhesion of life of the coating. conforming to as per drawing attached. Test reports to be submint by the Vendor before supply and also certified by the \"\"OEM of offerred product is ISO 14001:2015 Certified, ISO 18001:2007\"\". Green Card certificate,BIFMA.Aiota certification Warrantee period of chair four Year (Make : Durian/Nilkamal/Supreme /Featherlite). |
| 3 | Locker Bed Steel | Powder coated 60 micron Steel almirah (Locker Bed Steel) size 760mmx430mmx1120mm height including pedestal height 120mm with fixed type internal shelves 3 Nos, 01 Nos inside Locker dimension (WxDxH) 380mm x 430mm x 290mm with Hinges and locking arrangement, Main door leaf 02 Nos using MS sheet conforming to commercial quality CR-1, Grade 340 of IS 513:2008(reaffirmed 2013) (Fifth Revision) Amdt No 1. Door stiffner upto full door height provided, sheet thickness of side, Back, Top and bottom min 0.8mm, shelves thickness min 0.60mm, pedstal thickness min 0.8mm, MS sheet almirah door 0.8mm thick. Almirah door should have 01 Nos mortice lock, 01 Nos suitable length steel handles, each door 3 Nos hinges, All steel should not have crack, surface flaws and other defects etc. Steel almirah shall be as per drawing. Warrantee period of steel almirah one year (Make: Penite/Shubham Enterprises/Neelkamal/Godrej) |
| 4 | Metal Single Bed | (d)Metal Single Bed : -Metal Bed with 12mm thick Ply wood top of size 2000mmx915mmx450mm Mild steel medium grade tube 50mm x 25 mm, 1.5mm thickness and head board Square tube 40.0mm x 40.0mm x40.0mm used in Metal Bed shall comply with IS-7138 specification. Tube and fitting shall be clearly finished straight and free scale, crack, surface flaws, lamination and other defects. Tube of any section including fittings used for manufacture shall be as per aproved design. The long rails, short rails and legs will be tapered cut as approved. The ends of long rails, short rails and legs will be properly welded as per best trade practice. At lower end side and upper end side, between both legs should be covered by 12mm thick water proof Pre laminated and decorated particle board, fixed on 25mm x 25mm, 1.2mm thick hollow section by suitable tapping screw. Three additional stiffeners of Mild steel tubing 50mm x 25mm med grade ISI marked shall be welded joining long rails in the centre under the ply top. Ply wood 12mm thick (exterior grade) water proof both side commercial. BWR grade will be fixed on top with MS GI nuts and bolts of required approved size, all mild steel member finishes with black powder coating 60micron, Test report to be submit by the Vendor before supply, warrantee period of bed one Year (Make : Bhavna/Eros/Sai Enterprises). |
| 5 | Looking Mirror | Looking Mirror gents of size 450mm x1500mm x 5mm thick with 6mm thick plywood back & teak wood finished all around frame and hanging arrangement(Make :ATUL/MODI/GUARD/SWASTIK BOMBAY/ KOHINOOR/GOLDEN FISH))) |
| 6 | Stainless steel peg set | Stainless steel peg set of six hooks. |
| 7 | Tepoy | Tepoy of size 900mmx600mm made in 25mmx25mm square pipe of medium grade having 20mm thick laminated partticle board on top to be provided and all material used to be ISI mark as per drawing and directed. |
