|
| 1 | Synthetic enamel paint in all shades except black or chocolate shade |
| 2 | 25mm thick factory made PVC flush door shutter i/c carriage |
| 3 | Polythylene water storage tank with cover and suitable locking arrangement |
| 4 | Supply of U-PVC pipes 110mm |
| 5 | uPVC single equal tee (with door) 110x110x110mm |
| 6 | UPVC bend 87.5\" 110mm bend |
| 7 | UPVC pipe clip 110mm |
| 8 | Vitreous china lipped front urinal |
| 9 | Vitreous China flat back wash basin 630x450mm |
| 10 | Vitreous China Indian type W.C. pan of size 580mm |
| 11 | Vitreous china pedestal type water closet |
| 12 | uPVC pushfit coupler (single) 75mm thick |
| 13 | Vitrified floor tile 60x60cm condorming to IS 15622:2006 groupp (B1a) |
| 14 | Acrylic distemper 1st quality , having VOC content less than 50grams/litre |
| 15 | Ceramic Glazed Tiles 1st quality 300x300mm in all shades and designs of white, Ivory, grey , Fume Red brown etc. |
| 16 | 8mm thick granite stone tiles (mirror polished of all shades) |
| 17 | Mirror of superior make glass 60x45cm |
| 18 | Cementitous water proofing coating with elastic polymers |
| 19 | White cement |
| 20 | 15mm PTMT bib cock |
| 21 | PTMT pillar cock |
| 22 | 15mm dia PTMT stop cock (male thread) |
| 23 | PTMT angle stop cock with flange 15mm |
| 24 | PTMT extension nipple 15mm dia |
| 25 | 15mmnominal bore and 45cm length PVC connection pipe with PTMT Nuts |
| 26 | Semi Rigid PVC waste pipe for sink and wash basin 32mm dia with length not less than 700mm i/c PVC waste fittings |
| 27 | H.P. or L.P. ball valve with polythene floats: 15mm dia |
| 28 | Chlorinated Polyvinyl- chloride (CPVC) pipe 15mm nominal dia |
| 29 | Chlorinated Polyvinyl- chloride (CPVC) pipe 20mm nominal dia |
| 30 | Chlorinated Polyvinyl- chloride (CPVC) pipe 25mm nominal dia |
| 31 | White vitreous china 10 litre (full flush) capacity controlled low level flushing cisern with all fittings |
| 32 | Stone Aggregate (single size) : 10mm nominal size |
| 33 | Modular common burnt cly bricks of class designation 7.5 |
| 34 | Coarse sand (zone III) |
| 35 | Welding by electric plant |
| 36 | Mild steel sheets of 1.00mm thickness for tanks |
| 37 | Structural steel such as tees, angles channels and R.S. joists |