Military Engineer Services-MES has published Ca No Ge / H-45 / 2021-22 Repair / Mainteance Of Plumbing Work Sanitary Fitting Tilling Work Shaft And Toilet Bathroom Rcc Water Tank Repair Etc Of Main Hospital Bldg Under Ge E / M Rr Hosp At Delhi Cantt-10 Ca No Ge / H-45 / 2021-22 Repair / Mainteance O. Submission Date for this Tender is 19-01-2022. Plumbing and Sanitary Work Tenders in GE EM RR HOSPITAL Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-01-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of cement concrete unreinforced( in ground floors and paving at any position 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L PCC1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed by Engr-in-Charge. |
| 4 | M & L Non skid coloured ceramictiles 7-8 mm thick (square or rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 6 | M&Lfor 10 mm thick rendering in CM 1:4 on brick work or concrte surfaces walls for fixing of tiles complete all as specifiedand directed by Engr-in-Charge. |
| 7 | M & L for Double charge/ultra charge virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchc , set and jointed complete all as specified and directed by Engr-in-Charge. |
| 8 | M & L for 18 to 20mm thickgranite of any type (table rubbed & polished) in jambs, pillars, window cills, plate formsin CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed by Engr-in-Charge. |
| 9 | M&L 20mm thick screed bed or bedding layer of mortarin CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge |
| 10 | Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.complete all as specified and directed by Engr-in-Charge |
| 11 | -Ditto all as per item 10 above but 20 mm bore GI Pipe.complete all as specified and directed by Engr-in-Charge |
| 12 | Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 13 | All as per item No-12 here-in-above but bore of pipe 25 mm.complete all as specified and directed by Engr-in-Charge |
| 14 | M&Lcutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge |
| 15 | S&F in repairs gun metal, globe orgate valve with iron wheel, screwed both ends for iron pipesuitable for 15 mm bore iron pipe complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F in repairs gun metal, globe orgate valve with iron wheel, screwed both ends for iron pipesuitable for 20 mm bore iron pipe complete all as specified and directed by Engr-in-Charge |
| 17 | S&F of in repair vitreous chinawash basin, white colour, flat back type, of approx size580 x 450 mm (for hospital use) including waste coupling, wall bracket, waste pipe of suitable size etc,complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F in repairwhite colour,vitreous china washdown water closet pan (pedestal pattern) fancy type(excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed by Engr-in-Charge.. |
| 19 | S&F in repairwhite colour,vitreous china washdown water closet pan (pedestal pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litres including PVC white seat cover, complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F in repairwhite colour, vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor.complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repairs 15 mm dia chromium plated shower rose 125 mm size with CP arms for shower complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in replacement of 15mm dia PVC connection 45 cm long, complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F in replacement of long body bib cock, 15 mm bore with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F in repair fancy type Pillar taps 15 mm cast copper with capstan heads chromium plated screwd down high pressure with or with out lettred hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.but fancy type complete all as specified and directed by Engr-in-Charge |
| 26 | S&F in replacement of wash basin mixer, with out pop up waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mmbore pipe, complete all as specified and directed by Engr-in-Charge |
| 27 | Supply and fixing in repair toilet paper holder chromium plated complete all as specified and directed by Engr-in-Charge |
| 28 | S&F in replacement of angular stop cock/ angle valve 15 mm bore with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in replacement of PVC angular stop cock/ angle valve 15 mm bore with wall flange complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F in replacement of PVC bib cock, 15 mm bore with wall flange complete all as specified and directed by Engr-in-Charge . |
| 31 | S&F in replacement of PVC Piller cock 15 mm bore with wall flange complete all as specified and directed by Engr-in-Charge |
| 32 | S&F in repair chromium plated towel rail 20mm dia and600 mm long complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engr-in-Charge |
| 34 | S&F in replacement of 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed by Engr-in-Charge |
| 35 | S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed by Engr-in-Charge |
| 38 | S&F in replacement of PVC Jet with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in replacement PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F Soap dish, vitreous china white, approximat size 160X160X90mm fixed in repairs complete all as specified and directed by Engr-in-Charge |
| 41 | S&F 32mm dia and 60cm long PVC waste pipe including tail for WHB and Stainless Steel sink etc, complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F SS glossy finish grating of square shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with cement mortar to floor/nahani traps etc, complete all as specified and directed by Engr-in-Charge |
| 43 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr-in-Charge |
| 44 | M & L in repairs for Castiron floor trap of 75 mm outlet plainincluding jointing to waste pipe in run lead fixed in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 45 | Taking down CI pipes of 75mm size or pattern including all fitting fixed to wall, floors, complete all as specified and directed by Engr-in-Charge |
| 46 | S&F for 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F in repair (except pipe) 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears fixed with cement joints laid in floors or in trenchescomplete all as specified and directed by Engr-in-Charge. |
| 49 | S&F 75mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors complete all as specified and directed by Engr-in-Charge |
| 50 | S&F for 75mm borecast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls,complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repair (except pipe) 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified and directed by Engr-in-Charge |
| 52 | S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type)with parallel branches complete all as specified and directed by Engr-in-Charge |
| 53 | S&F cast iron bends,Tee(any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed by Engr-in-Charge. |
| 54 | S & F in repair of 100mm dia stack clamps made out of 50mm wide and 3 mm thickflat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed by Engr-in-Charge. |
| 55 | S & F in repair of 75mm dia stack clamps out of 50mm wide and 3 mm thickflat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring with smooth surface finished complete all as specified and directed by Engr-in-Charge |
| 57 | Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge |
| 58 | M & L for brick work with sub class "B"bricks straight or curved on plan exc 6 m mean radius builtin CM 1:6 etc, including demolition of brick workbuilt in cement mortar complete all as specified and directed by Engr-in-Charge |
| 59 | Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed by Engr-in-Charge |
| 60 | M&L for 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6on brick work or concrete surfaces of wall and finished the surfaces even and smooth as awhole or in patch work all as specified and directed by Engr in charge. Note: White cement shall be used as per site requirement complete all as specified and directed by Engr-in-Charge |
| 61 | M&L for preparation of newly plasteredsurfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified complete all as specified and directed by Engr-in-Charge |
| 62 | S & F in Repair of Aluminium alloy wire cloth,0.45mm nominal dia ofwire and average width of aperture1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engr-in-Charge. |
| 63 | Taking down chowkhat or frames with shutter (withouttaking off shutter from frame) area n exc 1.50 Sqm and removal from site.complete all as specified and directed by Engr-in-Charge |
| 64 | Taking down chowkhat or frames with shutter (withouttaking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each and removal from site.complete all as specified and directed by Engr-in-Charge |
| 65 | S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate complete frame complete all as specified and directed by Engr-in-Charge |
| 66 | S&F 1.5 mm thick section powder coated aluminium glazed window shutter, styles & rail 44mm x 44mm including all fittings, such asaluminium handle of size 100mm ,two no aluminium hinges of size 75mm each ,two no aluminium anodized tower bolts of size 100mm, with each moving leaf complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply, fabricating and fixing of aluminium door shutter powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.5mm thick.Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixingplain/tinted sheet glass or ACP sheet with aluminium beadingand rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm of and two aluminium tower bolts of 250mm size and 02 nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfacesall as specified and complete all as specified and directed by Engr-in-Charge at site. (Cost of sheet glass Plain/frosted/ACP Sheet shallbe measured and paid seprately ) |
| 69 | M&L for 5.5 mm thick plain glass fixed with beading in aluminium frame complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F 5mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) complete all as specified and directed by Engr-in-Charge |
| 71 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Engr-in-Charge |
| 72 | M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Charge |
| 73 | S&F Stainless Steel but hinges 100mm size complete all as specified and directed by Engr-in-Charge |
| 74 | S&F lAluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixlength of sliding door bolt 200mm complete all as specified and directed by Engr-in-Charge |
| 75 | S&F aluminium anodised Barrel tower bolts of extruded section,length of bolt 150mmcomplete all as specified and directed by Engr-in-Charge |
| 76 | S&F Extruded aluminium anodised alloy handles, fabricated type 150mm size. complete all as specified and directed by Engr-in-Charge |
| 77 | S&F in repairs 110mm bore PVC pipe (SWR) double socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge |
| 78 | S&F in repair PVC (SWR) bend 110 mm dia fixed in position complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in repairs 160mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge |
| 80 | S&F in repair PVC (SWR) bend 160 mm dia fixed in position complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
