Bids Are Invited For Serviceability Checks / Overhaul Of Electronic Equipment - ( A ) Clean Dust, Dirt And Moisture From The Internal And External Surface Of The Units. ( B ) Check Connectors For Proper Mating And Grounding. -Goa

Bids Are Invited For Serviceability Checks / Overhaul Of Electronic Equipment - ( A ) Clean Dust, Dirt And Moisture From The Internal And External Surface Of The Units. ( B ) Check Connectors For Proper Mating And Grounding. ( C ) Clean All Pcbs / Modules And Check For Correct Functionality. Procure And Renew If Faulty. ( D ) Smps / Power Supply Unit To Be Checked For Rated Input / Outputs. Renew If Faulty. ( E ) Systems Having Software To Be Checked For Correct Functionality. ( F ) Check The Cable And Connectors For Cuts, Corrosion Or Undue Strain. ( G ) Clean The Air Filter With Vacuum Cleaner As Applicable. ( H ) Check The Set For Optimum / Designed Performance And Reliability. ( J ) Replace The Defective Lamps / Caps / Fuses / Hinges / Screws / Knobs / Keys / Switches. ( K ) All Existing Shock Mounts / Base Plates / Foundations To Be Checked For Integrity And Renew If Necessary. ( L ) Renew All Earthing / Bonding Straps. ( M ) Renew All Terminal Lugs ( N ) Renew Of Emi / Emc Gaskets Of All Openings Of Equipment. ( P ) Interfacing To All Systems To Be Proved As Applicable. ( Q ) Carry Out All Annual Routines And Performances Tests As Per Maintop At Shop Floor , Post Overhaul / Serviceability Checks - Post Overhaul / Repair / Routines Following To Be Carried Out:- ( A ) All Systems / Equipments / Machinary Should Be Proved To Rated / Designed Power / Capacity Without Limitations / Observations And Trials To Be Offered To The Naval Trial Agencies For Design Specifications Along With Installation Inspections As Per Approved Wlds, Op Checks, Hats And Sats. ( B ) Any Unserviceability During Undertaking Above Serial Needs To Be Repaired / Renewed By Firm Inclusive Of Spares. ( C ) Vibration Levels At All Points Should Be Less Than 5 Mm / Sec.The Equipment Performance Will Be Considered Satisfactory Only If The Performance Trials Are Cleared By Naval Inspection Agency. ( D ) Present System For Hats And Sats As Per The Standards Of Watt. , Dat Recorder ( Dmr - 16 A ) Make : Bel Model : Dat Recorder ( Dmr - 16 A ) Serial No : 16A-047 Oems Local Representative : Bel Banglore - Overhauling Of Complete System As Per Sow 3. , Dat Recorder ( Dmr - 16 A ) - Carry Out Serviceability Checks Of The Attenuator , Replace Defective Attenuator. , Dat Recorder ( Dmr - 16 A ) I - Carry Out Integration Of The System With The ( I ) 04 Pae 3060 ( Ii ) 01 In No Pae M7 ( Iii ) Ccs Mk Ii ( Iv ) Rt5022 ( V ) Rt 6222 ( Vi ) Intercom ( Vii ) Tr 2400 ( Viii ) 02 In Nos St1075 , Dat Recorder ( Dmr - 16 A ) Ii - Post Overhaul / Serviceability Checks As Per Sow 4. , Mandatory Spares Dat 1 ( Recorder ( Dmr - 16 A ) ) - 3.5Mm Headset , 2 ( Recorder ( Dmr - 16 A ) ) - Attenuator Total Quantity : 1

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	06-Jan-2022			11-01-2022
2	11-Jan-2022			14-01-2022
3	07-Feb-2022			11-02-2022
4	10-Feb-2022			17-02-2022
5	04-Mar-2022			11-03-2022
6	09-Mar-2022			22-03-2022

Refer document

Refer document

Refer document

Sl. No.	Item Title	Item Description
1	Serviceability checks/ overhaul of Electronic equipment	(a) Clean dust, dirt and moisture from the internal and external surface of the units. (b) Check connectors for proper mating and grounding. (c) clean all PCBs/ modules and check for correct functionality. procure and renew if faulty. (d) SMPS/ power supply unit to be checked for rated input/ outputs. renew if faulty. (e) Systems having software to be checked for correct functionality. (f) Check the cable and connectors for cuts, corrosion or undue strain. (g) Clean the air filter with vacuum cleaner as applicable. (h) Check the set for optimum/ designed performance and reliability. (j) Replace the defective lamps/caps/ fuses/ hinges/ screws/ knobs/ keys/ switches. (k) All existing shock mounts / base plates / foundations to be checked for integrity and renew if necessary. (l)Renew all earthing/ bonding straps. (m) Renew all terminal lugs (n) Renew of EMI/ EMC gaskets of all openings of equipment. (p)interfacing to all systems to be proved as applicable. (q) Carry out all Annual routines and performances tests as per Maintop at shop floor
2	post overhaul/ serviceability checks	Post overhaul /repair/ routines following to be carried out:- (a) All systems/ equipments/ machinary should be proved to rated/designed power /capacity without limitations /observations and trials to be offered to the naval trial agencies for design specifications along with installation inspections as per approved WLDs, Op checks, HATs and SATs. (b) Any unserviceability during undertaking above serial needs to be repaired / renewed by firm inclusive of spares. (c)Vibration levels at all points should be less than 5 mm/sec.The equipment performance will be considered satisfactory only if the performance trials are cleared by naval inspection agency. (d) Present system for HATS and SATS as per the standards of WATT.
3	Dat Recorder (DMR - 16 A)Make : BEL Model : Dat Recorder (DMR - 16 A) Serial No : 16A-047 OEM"s Local Representative : BEL BANGLORE	Overhauling of complete system as per SOW 3.
4	Dat Recorder (DMR - 16 A)	Carry out serviceability checks of the attenuator ,replace defective attenuator.
5	Dat Recorder (DMR - 16 A) I	Carry out integration of the system with the(i) 04 PAE 3060 (ii) 01 in no PAE M7 (iii) CCS MK II (iv) RT5022 (v) RT 6222 (vi) Intercom (vii) TR 2400 (viii) 02 in no"s ST1075
6	Dat Recorder (DMR - 16 A) II	Post overhaul/ serviceability checks as per SOW 4.
7	Mandatory spares Dat 1 (Recorder (DMR - 16 A))	3.5mm Headset
8	2(Recorder (DMR - 16 A))	Attenuator