|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(a) With earth obtained from excavation of foundation. |
| 3 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 4 | Supplying and Laying Polithene sheet .. |
| 5 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.(b) River bazree |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m(i) Tor steel/Mild SteelI SAIL/TATA I RINL |
| 8 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size)excluding shuttering and reinforcement if any, in ground flooras per relevant IS codes.(ii ) River Bazree |
| 9 | Brick work with 1st class bricks in cement mortar (1:4)In Foundation and Plinth |
| 10 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor. |
| 11 | M.S. structural works in roof trusses with tubular sectionconforming to IS: 806-1968 & IS: 1161- 1998 cnnected to oneanother with bracket, gusset cleats as per design, direction ofEngineer-in-charge complete including cutting to requisite size,....................................................Therates are considered for a height of erection 8 m. / 2nd floor levelfrom the ground. Add 1.5 % extra over the rate for each additionalfloor or 4m. beyond the initial 8 m. or part thereof.i) For trusses spanning up to 12.00 mFor ramp railling and waiting area |
| 12 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).b) With 0.63 mm thick sheet |
| 13 | M.F Suspended celling made with 12.5 mm thick Gypsum Plaster board incliding G.I perimeter 0.55 flush (having two 20 mm 30 respectively and web along ceiling with G.I. intermediate channel mm thick size 45 mmx15mm placed c/c with G.I. ceiling of 25 mmx10mmx0.55 mm thick to ceiling with and steel expansion fastener ceiling section 0.55 thick of size 51.50 mmx26mm fixed to the intermediate channels with the of connecting clip in the direction perpendicular the intermediate channel 300 12.5 mm thick Gypsum plastered board to fixed under ceiling section as above machine screws. The boards joined finished with jointing compound, paper tape application of top ato per direction of Engineer |
| 14 | Dismantling artificial tone flooring upto 50 mm thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m (1st Floor) |
| 15 | Stripping off worn out plaster and raking out joints of walls, celings etc, upto any height and in any floor including removing rubbish within a lead of 75m as directed |
| 16 | R.C. shelves (1:15:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars). shuttering etc. and 10 mm thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. In ground floor, (a) 50 mm. Thick panels, I. SAIL/ TATA/RINL |
| 17 | (a) M.S. or W Fan mental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (1) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq mtr |
| 18 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges abd M.S clamps (d) Sal: Local |
| 19 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings In ground floor. (in case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak |
| 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:6 cement mortar(For Exterior Wall)15 mm thick plaster(For New Work) |
| 21 | 15 mm thick plaster(Outside) |
| 22 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge.(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. |
| 23 | a) 25 mm thick Tiles as per IS: 1237-2012 for footpath ramp, staircase of public building (over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side of Block Cement for Mortar & Slurry to be supplied by Department).(ii) Coloured Decorative |
| 24 | Anodised aluminium barrel / tower/socket bolt (full covered) of approved 144. Si no - manufactured from extruded section conforming to I.S.204/74 fitted and fixed 26 with cadmium plated screws: iv) 150 mm long X 10 mm dia. Bolt |
| 25 | Anodised aluminium D-type handle of approved quality manufactured from 145, SI no - extruded section conforming to I.S.specification (I.S. 230/72) fitted and fixed 30 complete: (a) With continuous plate base.v) 125 mm grip x 12 mm dia rod |
| 26 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with dia rod with centre bolt and round fitting.(C) 300mm long |
| 27 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI 140, Sl no-mark, vi) 100mm. X 50mm. X 1.25mm.. |
| 28 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. |
| 29 | (B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m |
| 30 | Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 31 | Applying interior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and papering the surface throughly. |
| 32 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification), including cleaning and smoothning of surface.Two Coats |
| 33 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface :[With super gloss (hi-gloss)](iv) Two coats (with any shade except white) |
| 34 | On Timber or plastered surface(IV) Two Coats |
| 35 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.In Ground Floor:(b) Two Coat |
| 36 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) Premium 100% Acrylic Emulsion |
| 37 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite 115 Sl. no-door frame as per approved section with ass fibre reinforced plastic 03 moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria (ii) 66mm x 70mm |
| 38 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. (i) 32 mm thick |
| 39 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement .....................................Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.i) For 10 users |
| 40 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:15:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.ii) With Bazree (N.B Variety) (SAIL/TATA/RINL) |
| 41 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes: (ii) 110 mm. Dia. |
| 42 | a) Plain Tee ii) 110 mm dia |
| 43 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 rio-19(1)(medium duty) conforming to ASTMD-1785 and threaded to match with Gl Pipes as per IS 1239 (Part-1), with all necessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket. reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required jointing materials and two coats of painting with approved paint in any position above ground15 mm |
| 44 | 25 mm |
| 45 | 40 mm |
| 46 | Supplying PVC water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity |
| 47 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white, (1) 635 mm X 395 mm X 420 mmvitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete |
| 48 | CP Pillar Cock Super Deluxe with Aerator - 15 mm. (Equivalent to Code No. 508 & Model No. Tropical / Sumthing Special of ESSCO or similar brand). |
| 49 | (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model-FLORENTINE of JAQUAR or similar brand). |
| 50 | Supplying, fitting and fixing white vitreous china based quality approved make wash basin with C.I. brackets on 75 mm x 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C. waste pipe with C.P. nut 32 mm dia,, 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P nut including mending good all damages and painting the brackets with two coats of approved paints. (ii) 630 mm X 450 mm size |
| 51 | Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).(1) 580 mm |
| 52 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. mm(0) 450 mm X 350 |
| 53 | Supplying fittinf and fixing 10 ltr PVC low down cistern conformating to IS specification with PVC fitting complete CI brackets including two coats of painting to bracket etc. |
| 54 | Electrification Work |
| 55 | Add GST @12 % |
| 56 | Add Cess @ 1 % |
