Installation and Energisation of Banjagola L.I. Project under Naktideul Block in Sambalpur District of L.I. Division, Sambalpur
Tender Value
45.60 Lakhs
Estimated cost
Bid Submission
30 Dec 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naktideul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation and Energisation of Banjagola L.I. Project under Naktideul Block in Sambalpur District of L.I. Division, Sambalpur
BOQ
| Sl. No. | Item Description |
| 1 | Part-A |
| 2 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 3 | Filling the foundation and plinth with excavated material in hard soil as directed by the Engineer-incharge. |
| 4 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 5 | Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 6 | Cement concrete (1:2:4) with 12mm size black C.B. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 7 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 8 | Random Rubble stone masonary in cement mortar (1:6) in foundation and plinth etc complete as per the direction of the Engineer-incharge. |
| 9 | Brick work with Fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 10 | Brick work with Fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in Super structure etc. complete as per the Engineer-incharge. |
| 11 | 20mm thick plaster in cement mortar (1:6) finished smooth to stone massonary after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 12 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 13 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 14 | Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge. (a)Plinth band |
| 15 | (b)Lintel |
| 16 | (c)Chajja |
| 17 | (d)Roof slab |
| 18 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tieing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Steel Bar (FE 415/ FE 500) etc complete as directed by the Engineer-incharge. |
| 19 | Dry brick rammed Khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete as directed by the Engineer-incharge. |
| 20 | 25mm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 21 | MS Pannel Door double leaf with MS frame overall size including frame of height 1.2mt x 1.98 mt. Door & Window of size 1.2 Mtr X 0.9 Mtr with shutter of 20 gauge CR sheet pannel as per approved size & specification etc. complete including cost of all materials fitting and fixing the door etc. complete as per the direction of the Engineer-incharge. |
| 22 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 23 | Distempering 2 coats to walls with distemper of approved shades on new work to give an even shade after one coat of white washing. |
| 24 | Painting of enamel paint of approved quality and colour for painting over iron work after a coat of primer including cost taxes etc. complete as per the direction of the Engineer-incharge. |
| 25 | 20mm thick cement plaster (1 :4) for grading plaster |
| 26 | Supplying fitting and fixing of skylight of approved quality of size 0.45mtr. X 0.30mtr. made of cement concrete as per the direction of the Engineer-incharge. |
| 27 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 28 | Rough stone dry packing on the river embankment near pump foundation to strengthening it. |
| 29 | Finishing wall with artistic paint over two coat of weather coat up to 3 mtr. height. |
| 30 | Supply of 300 mm R.C.C. hum pipe( NP 3 )as per specificationsincluding laying & fitting |
| 31 | Fitting of un plasticised 250mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 32 | Fitting of un plasticised 200mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 33 | Labour charges for installation of 12.5/15 HP Motor including transportation from village to work site, fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motorand other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-incharge. |
| 34 | Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / G.I.pipe including welding of flange at one end and other end suitable for connection to delviery pipe lines of pump sets including cost of cutting and welding, materials and fitting it in proper alighmentwith the deivery pipe line of pump sets etc. complete as per direction of Enginee-in-Charge. |
| 35 | Cost of river embankment cutting, cleaning & fitting of suction & delivery fittng with flanges, bends, foot valve, Sluice valve, N.R.Valve etc. including cost of 1/8\" rubber insertion, nut & bolt, white lead paint, etc. complete as per direction of Engineer-in-Charge. |
| 36 | Welding, laying and fitting of 250 mm Ø MS pipe etc. complete as per the direction of the Engineer-incharge. |
| 37 | Monoblock pump set total head of 28 mtrs capable to discharge 1700 LPM with 15HP/11 KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \"F\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery = 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares. |
| 38 | Supplying of 250mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - II UPVC pipe to withstand pressure of 4.0 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 39 | Supplying of 250mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 40 | Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 41 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 42 | 250 mm M.S. pipes with plain ends in random length of 4 to 7 mtrs. Confirming to BIS 3589 with minimum wall thickness of pipes should be 5.5 mm each pipe should bear ISI specification and manufacturers name / Trade mark. Steel grade of the pipe should be Fe330 |
| 43 | 250 mm Ø MS Flange medium duty as per IS specification |
| 44 | 100 mm dia G.I. bend IS No.1239(Part-II/1992) |
| 45 | 100 mm dia G.I. flange IS No.6392 / 1971 |
| 46 | 100 mm Ø C.I. Foot Valve should be of swing type friction less with single disc confirming to IS – 4038/1979 of reputed brand |
| 47 | 100 mm Ø Sluice Valve Flanged type of Manufacturing Standard - BS 5163 / IS14846 Pressure Ratings PN10. |
| 48 | 100mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 49 | 200 mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 50 | 100 X 100 X 80 mm dial ball valve for priming. |
| 51 | 250 mm Ø PVC coupler (4 kg/cm2) Agricultural PVC fittings confirming to IS-4995/1988 with latest ammendment |
| 52 | 200 mm Ø PVC coupler (4 kg/cm2) Agricultural PVC fittings confirming to IS-4995/1988 with latest ammendment |
| 53 | 250 x 250 x 200 mm PVC Tee Confirming to IS 4985-2000 |
| 54 | 200 mm x200 mm x200 mm Ø PVC Equal Tee (W.P. 4 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 55 | 200mm x 200mm x 110mm GI riser Tee with accessories including labour cost for fitting. |
| 56 | 200 mm dia C.I butterfly valve with all accessories. |
| 57 | 250 mm Ø PVC End Cap (W.P. 10 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 58 | 200 mm Ø PVC End Cap (W.P. 10 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 59 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. Including labour charges for fitting. |
| 60 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 16 Amp (AC -3) duty contactor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter,Ameter,MCB in complete shape including Indicator Lamp & 6 KVAR capacitor as per direction of Engineer-in-Charge. |
| 61 | Base frame for panel (size 0.40mx0.20m) made with 3\" size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of smokes grey enamel paint & Base frame for motor (size 0.50mx0.27m) made with 3\" size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 H.P. to 15 H.P. coloured with one coat of red oxide primer & two coats of smoke grey enamel paint. |
| 62 | Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red oxide primer and two coats of smoke gray / navey blue enamel n both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board. |
| 63 | 3 x 16 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. |
| 64 | T & P Materials Kit comprising of Tester,Screw driver,DE Spanner,Plier,Ring Spanner suitable for maintenance ol L.I.project. |
| 65 | Part-B |
| 66 | Cost of 11/0.4 KV, 63 KVA Transformer |
| 67 | Cost of 9 mtr. long 300 Kg, PSC pole |
| 68 | Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with out 300 Kg. 9 Mtr. Long PSC pole support in 60 Mtr. Span.55sqmm AAA Conductor with double disc arrangement,11KV \"V\" cross arm with required nos. of 11 KV B & S disc. Insulators and 11KV pin insulators, carping & paddig of poles,danger board at each pole, anticlimbing devices.Stay set at each bending point and double stay at end point with 18mm G.I. H.T. stay, concreting of stay with anchor plate etc. including cost of materials, labour, transportation, inspection & commissioning etc. complete including painting in Navy Blue colour band with inscription of OLIC in each Pole |
| 69 | Cost of materials for 11 KV 3 Ph. taping pole without pole as per specification of DISTCOM. |
| 70 | Construction & erection of 11/0.416 KV, 63 KVA (BIS level-II) D.P.sub-station with out transformer confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessorieslike 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 25 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , , Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioningincluding painting in Navy Blue colour band with inscription of OLIC in each Pole. |
| 71 | Barbed wire Fencing (size 15\" x 10\") with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification . |
| 72 | Spike Provision on 9 mt long 300 kg PSC pole. |
| 73 | Electrical Pipe Earthing of 40 mm dia Medium gage 3 mtrs using required quantity of common salt, charcoal , GI nut bolt including digging the earth pit of size 1.2mtr. X 1.2mtr.x3mtr.And digging the wire trench and refilling after completion of earthing including supply of all materials trnsportation etc. complete as per the direction of the site engineer-in-charge. |
AI Tender Summary
Tender Timeline
Dec 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 31, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender