Jjm 2020 21 Wss To Vakathanam Panchayath Replacing 250 Mm Cast Iron Pumping Main To Kumaranallor On Velloparambu Bridge By 250 Mm Ms Pipe Jjm 2020 21 Wss To Vakathanam Panchayath Replacing 250 Mm Cast Iron Pumping Main To Kumaranallor On Velloparambu Brid
Tender Value
14.05 Lakhs
Estimated cost
Bid Submission
31 Dec 2021
0 days left
EMD
21100
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vakathanam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Jjm 2020 21 Wss To Vakathanam Panchayath Replacing 250 Mm Cast Iron Pumping Main To Kumaranallor On Velloparambu Bridge By 250 Mm Ms Pipe Jjm 2020 21 Wss To Vakathanam Panchayath Replacing 250 Mm Cast Iron Pumping Main To Kumaranallor On Velloparambu Bridge By 250 Mm Ms Pipe
BOQ
| Sl. No. | Item Description |
| 1 | REPLACING 250MM CI PUMPING MAIN ON VELLOPARAMBU BRIDGE TO FACILITATE LAYING OF NEW 400 MM DI K9 PUMPING MAIN TO INCHERIKUNNU OHSR |
| 2 | Fabricating MS pipes of size 250mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. |
| 3 | Dismantling 250 mm CI pipe and its specials from trenches and stacking at worksite, conveying to stack yard by mechanical means and unloading and stacking the materials in the yard premises including all labour for dismantling the pipe from trenches, loading, conveying, unloading and stacking materials, hire charges of crane,lorry and all equipments required for the work etc complete as per the direction of engineer in charge. |
| 4 | Fabricating MS flanges of diameter 250 mm using 12 mm thick MS plateincluding cost and conveyance charges of MS plate, all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. |
| 5 | Providing sand blasting in the inside surface of fabricated MS pipe to remove all corrosive particles and making the inside surface smooth and providing two layer coating with anti corrosive good quality food grade epoxy paint including all conveyance charges, sand blasting charges, cost of all materials, all labour charges etc complete as per direction of engineer in charge. |
| 6 | Labour for cutting C.I. pipe with steel saw.250 mm diameter C.I. pipe |
| 7 | Cutting 250 mm (ID) MS pipes for making bends and other specialsby gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
| 8 | Welding250mm (ID) MS pipes for making bends and other specialsby gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
| 9 | Grinding cut and weld edges of 250 mm (ID)MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
| 10 | Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9/ MS pipes conforming to IS: 8329:K-9 conforming to IS: 8329 excluding cost of pipe and specials: 250 mm dia Ductile Iron Double Flanged\"Data derived from 18.73.4 in DAR |
| 11 | Providing flanged joints to double flanged C.I./ D.I /MS pipes and specials, including testing of joints:250 mm diameter pipe |
| 12 | Testing 250mm MS/DI/CI pipeline with potable water to the required test pressure . 250 mm dia Observed Data derived from item no.1022 of PHED DATA |
| 13 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Large Orifice Type S2, Size 50mm. |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 15 | Conveying and fixing C I Single acting AirValve of approved qualitywith bolts,nuts,rubber insertions etc . excluding the cost of airvalve(the tail pieces if required will be paid seperately):50 mmDouble acting Air Valve Data derivedfrom item no.18.59.1 of DAR |
| 16 | Fabrication of 250 X 250 TEE with flange(by welding 250 mm pipe with main line and also provide additional MS pad to the cut portion to give extra safety to joints with suitable width as per direction of departmental officers. |
| 17 | Fabrication of 250 MM long mechanical coller with flange(by welding 250 mm pipe with main line and also provide additional MS pad to the cut portion to give extra safety to joints with suitble width as per direction of departmental officers |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 19 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 20 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars |
| 21 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
AI Tender Summary
Tender Timeline
Dec 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 31, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender