|
| 1 | Providingand fixing of partition of 1.2M height partition with aluminium frame of tube 50X40 mm fixed horizontally & vertically at the distance of 600mm c/c with both side 6 mm thick marine ply fixing with top finished with 1mm thick laminate finish with teak wood moulding at top,including melamine polish etc complete as per Architectural drawings. |
| 2 | Providingand fixing of partition of full height partition with aluminium frame of tube 50X40 mm fixed horizontally & vertically at the distance of 600mm c/c with both side 6 mm thick marine ply fixing with top finished with 1mm thick laminate finish with teak wood moulding at top,including melamine polish etc complete as per Architectural drawings. |
| 3 | Providing & Fixing panelling/caldding with frame work of aluminium section of size 50mm x 25mm & put up in position horizontaly & verticaly at equal spacing and fixed with 12mm thick marine ply and top finished with 1 mm thick laminate finish |
| 4 | Providing & supplying table A3 of size 1.60m x 0.75m x 0.75m table made of 19mm thick marine block board with desk top & vertcal sides finished in 1mm thick laminate having 6mm thick half round teak wood moulding of 1/2\"x1\"-1/2\" having one storage compartment of width 0.44m having one sliding drawers of 150 mm depth of 12mm thick marine plywood drawer at top and one openable shutter below it, drawer face finished in 1mm thick laminate and with leg space having a wooden foot rest . including necessary hardwares such as SS handles, locks, shutter hinges, telescopic drawer chanel, 3\" dia wire manager key board tray etc. and all internal to be finished in french polish complete etc. as per drawing. |
| 5 | Providing & supplying table-A4 of size 1.20m x 0.60m x 0.75m table made of 19mm thick marine block board with desk top & vertcal sides finished in 1mm thick laminate having 6mm thick half round teak wood moulding of 1/2\"x1\"-1/2\" having one storage compartment of width 0.40m having one sliding drawers of 150mm depth of 12mm thick marine plywood at top and one open space for CPU, and with leg space having a wooden foot rest drawer face finished in 1mm thick laminate. without any soft board with cloth and without both side any type of partition, including necessary hardwares such as SS handles locks shutter hinges, telescopic drawer chanel, 3\" dia wire managekey board tray etc. and all internal to be finished in french polish complete etc. as per drawing. |
| 6 | Providing & supplying table-A5 of size 1.20m x 0.60m x 0.75m table made of 19mm thick marine block board with desk top & vertcal sides finished in 1mm thick laminate having 6mm thick half round teak wood moulding of 1/2\"x1\"-1/2\" having one storage compartment of width 0.40m having one sliding drawers of 150mm depth of 12mm thick marine plywood at top and one open space for CPU, and with leg space having a wooden foot rest drawer face finished in 1mm thick laminate. without any soft board with cloth and without both side any type of partition, including necessary hardwares such as SS handles locks shutter hinges, telescopic drawer chanel, 3\" dia wire managekey board tray etc. and all internal to be finished in french polish complete etc. as per drawing. |
| 7 | Providing & supplying table-A6 of size 1.20m x 0.60m x 0.75m table made of 19mm thick marine block board with desk top & vertcal sides finished in 1mm thick laminate having 6mm thick half round teak wood moulding of 1/2\"x1\"-1/2\" having one storage compartment of width 0.40m having one sliding drawers of 150mm depth of 12mm thick marine plywood at top and one open space for CPU, and with leg space having a wooden foot rest drawer face finished in 1mm thick laminate. without any soft board with cloth and without both side any type of partition, including necessary hardwares such as SS handles locks shutter hinges, telescopic drawer chanel, 3\" dia wire managekey board tray etc. and all internal to be finished in french polish complete etc. as per drawing. |
| 8 | Providing & supplying side table for table A3 of size 0.90m x 0.45m x 0.75m table made of 19mm thick marine block board with desk top & vertcal sides finished in 1mm thick laminate having 6mm thick half round teak wood moulding of 1/2\"x1\"-3/4\" having one sliding drawers of 150mm depth of 12mm thick marine plywood at top and one open space for CPU of width 0.40m, including necessary hardwares such as SS handles locks, telescopic drawer chanel, 3\" dia wire managekey board tray etc. and all internal to be finished in french polish etc. complete. |
| 9 | Providing & supplying cupboard-CB1 of size 1.20m x0.45m x 2.10m cupboardmade up of 19mm thick block board with shutters of thickness 19mm with 10mm groove at the shutter edges and top laminated with 1mm thick matt finished laminate including providing horizontal shelves @ 0.35m C/C and vertical partition @0.45 C/C, laminating all the internal surfaces of the compartments with 0.6 mm thick off white colour laminate, providing & fixing 6mm thick marine plywood at the back of cupboard with 6mm thick teak wood beading to the shutter edges, varnishing unlaminated surfaces, providing & fixing shutters with SS hinges with necessary screws, 6\" long size SS handles, godrej make cupboard lock, 100mm SS tower bolts etc. complete as per the drawing |
| 10 | Providing & supplying cupboard-CB2 of size 0.60m x0.45m x 2.20m made up of 19mm thick block board with shutters of thickness 19mm with 10mm groove with 6mm thick teak wood beading to the shutter edges and top laminated with 1mm thick matt finished laminate including providinghorizontal shelves @ equal height C/C laminating all the internal surfaces of the compartments with 0.6 mm thick off white colour laminate, providing & fixing 6mm thick marine plywood at the back of cupboard , with varnishing unlaminated surfaces, providing & fixing shutters with SShinges with necessary screws, 6\" long size SS handles, godrej make cupboard lock, 100mm SS tower bolts etc. complete |
| 11 | Providing & supplying cupboard-CB3 of size 1.20m x0.45m x 1.80m cupboardmade up of 19mm thick block board with shutters of thickness 19mm with 10mm groove at the shutter edges and top laminated with 1mm thick matt finished laminate including providing horizontal shelves @ 0.35m C/C and vertical partition @0.45 C/C, laminating all the internal surfaces of the compartments with 0.6 mm thick off white colour laminate, providing & fixing 6mm thick marine plywood at the back of cupboard with 6mm thick teak wood beading to the shutter edges, varnishing unlaminated surfaces, providing & fixing shutters with SS hinges with necessary screws, 6\" long size SS handles, godrej make cupboard lock, 100mm SS tower bolts etc. complete as per the drawing |
| 12 | Providing and fixing Soft board with 12 mm thick marine ply fixed with 12 mm thick soft boardand with thick jute cloth fixed over soft board etc. compelete as per the drawing and as directed by the Engineer in charge. |
| 13 | Providingand fixing of 30 mm thick flush Door Shutters with 1mm thick laminate at top both side with glass cut out of 5mm thick clear glass with teak wood mouldingincluding all hardware fittings with melamine polish etc complete as per drawings. |
| 14 | Providing Superior type-B chairs-casters with high backrest and arm rest (for ASW) |
| 15 | Providing Standerd type-C chairs-casters with Low backrest and arm rest (for Admin staff.) |
| 16 | Providing type-D MS frame work with wood (for Visitors) |
| 17 | Providing & Supplying Name plates of Acrylic sheets |
| 18 | Providing 30 mm dia SS dustbin |
| 19 | Providingand fixing of Vertical Blinds |
