}

Providing And Fixing Open Gym And Jhole In Parks Of Balita Village Civil Works Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dr, Kota-Rajasthan

Urban Improvement Trust-UIT has published Providing And Fixing Open Gym And Jhole In Parks Of Balita Village Civil Works Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dr. Submission Date for this Tender is 31-12-2021. Earth Moving Machinery Tenders in Kota Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

30394671
Providing And Fixing Open Gym And Jhole In Parks Of Balita Village Civil Works Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dr
Open Tender
Indian
Rajasthan
Kota
31-12-2021

Tender Details

Providing And Fixing Open Gym And Jhole In Parks Of Balita Village Civil Works Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 2 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 3 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 (1 cement : 6 sand) 4 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . 5 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.: M20 grade Nominal Mix 6 Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 7 Cement concrete pavement of required thickness with (b) 1:1.5:3 (1-Cement:1.5-course sand : 3-graded stone aggregate 20 mm nominal size) including finishing complete. 8 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 9 Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick. 10 Random rubble dry stone Kharanja under floor. 11 Filling in plinth withlocally available good earth under floors including watering ramming consolidating and dressing complete including cost of Locally available good earth 12 Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. 13 Polished Blue Kota stone flooring skirting, laid over 20 mm thick base of C.M. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 901 to 2000 Sq.Cm :25 mm thick slab. 14 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work 15 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 16 Supply & stacking good earth at site complete including loading, unloading & transportation etc. 17 Spreading of manure and good earth in required thickness (Cost of manure and good earth to be paid separately) 18 Laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc. (Cost of manure or extra good earth to be paid separately) Maintenance of lawns for 30 days or more till the grass forms a thick lawns free from weeds & fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost In rows 5 cms apart in either direction 19 Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 50mm x 50mm x 3.15mm 20 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 21 S/F of following outdoor Gym (fitness) Equipment for park as per enclosed drawing & design in Special condition & direction of Engineer-in Charge make India mart or Sanhe city Guiyuxing Sportings goods Co., Ltd. or Arihant or equivalent. 22 Double Bar:Features : -H-46, L-66, W-3-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns 23 Sit Up Board:Features : -H-39, L-46, W-21-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns 24 Double Surf Board:Features : -H-44, L-310, W-32-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe-Powder Coated 100-110 microns- FRP Foot Rest 25 Sky Walker:Features : -H-48, L-51, W-18-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest 26 Cross Trainer:Features : -H-53, L-45, W-111-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest 27 Shoulder Builder Triple:Features : -H-63, L-48, W-36-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns 28 Double Twister Seating :Features : -H-44, L-71, W-22-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns 29 Ches Press Double:Features : -H-68, L-55, W-23-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest 30 Rower Double:Features : -H-38, L-76, W-27- 2x2 Inch Square CRCA Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest 31 Peck Deck Double:Features : -H-62, L-61, W-3,2-3 Inch Dia, Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest 32 Leg Press Double:Features : -H-58, L-64, W-17-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest 33 Providing and fixing benches with side panel casted in Cast Iron single piece and middle part is of mild steel. Approx. ht. is 700 mm and length is 1250 mm the carving work is as per enclosed drawing and details and instruction of engineer incharge. 34 Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications :Area : 3.0 mtr x 2.50mtr.Safe play area : 4.0 mtr x 3.50 mtr.Height : 2.40 mtr. (on ground level)Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain (ISO : 9001-2000 make) 35 Up and Down Ladder : Providing and Fixing of up-down ladder made out of MS pipe 40mm, 25mm size of length 10xheight should be less than 6 pipe should be 36 Parallel bars : Parallel Bars is suitable for 10 to 16 years children and main verticle frame made of 50mm NB pipe and horizontal bars made of 32mm NB pipes. Horizontal bars having length 2.10 mtr. and height is 1.20 mtr. On ground level. Total area of this parallel is 2.0 mtr. x 1.0 mtr. 37 Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr.Height : 0.90 mtr. Main Pipe : 50 NB pipePlank : 40 NB pipeHandle : 20 NB pipeSeats : MS sheet (5mm thick) FRP (ISO : 9001-2000 make) 38 Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx)

Key Value

Document Fees
INR 2000 /-
EMD
Refer document
Tender Value
INR 23.60 Lakhs /-

BOQ Items

Name of Work:ckfyrk xkao ds ikdksZ esa vksiu fte o >wys yxkus dk dk;Z
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils
2Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size).
3Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 (1 cement : 6 sand)
4Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick .
5Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.: M20 grade Nominal Mix
6Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc.
7Cement concrete pavement of required thickness with (b) 1:1.5:3 (1-Cement:1.5-course sand : 3-graded stone aggregate 20 mm nominal size) including finishing complete.
8Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size).
9Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick.
10Random rubble dry stone Kharanja under floor.
11Filling in plinth withlocally available good earth under floors including watering ramming consolidating and dressing complete including cost of Locally available good earth
12Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect.
13Polished Blue Kota stone flooring skirting, laid over 20 mm thick base of C.M. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 901 to 2000 Sq.Cm :25 mm thick slab.
14Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work
15Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
16Supply & stacking good earth at site complete including loading, unloading & transportation etc.
17Spreading of manure and good earth in required thickness (Cost of manure and good earth to be paid separately)
18Laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc. (Cost of manure or extra good earth to be paid separately) Maintenance of lawns for 30 days or more till the grass forms a thick lawns free from weeds & fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost In rows 5 cms apart in either direction
19Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 50mm x 50mm x 3.15mm
20Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size).
21S/F of following outdoor Gym (fitness) Equipment for park as per enclosed drawing & design in Special condition & direction of Engineer-in Charge make India mart or Sanhe city Guiyuxing Sportings goods Co., Ltd. or Arihant or equivalent.
22Double Bar: Features : -H-4"6", L-6"6", W-3" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe Powder Coated 100-110 microns
23Sit Up Board: Features : -H-3"9", L-4"6", W-2"1" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe Powder Coated 100-110 microns
24Double Surf Board: Features : -H-4"4", L-3"10", W-3"2" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe -Powder Coated 100-110 microns - FRP Foot Rest
25Sky Walker: Features : -H-4"8", L-5"1", W-1"8" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest
26Cross Trainer: Features : -H-5"3", L-4"5", W-1"11" -3 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest
27Shoulder Builder Triple: Features : -H-6"3", L-4"8", W-3"6" -3 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns
28Double Twister Seating : Features : -H-4"4", L-7"1", W-2"2" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns
29Ches Press Double: Features : -H-6"8", L-5"5", W-2"3" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest
30Rower Double: Features : -H-3"8", L-7"6", W-2"7" - 2x2 Inch Square CRCA Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest
31Peck Deck Double: Features : -H-6"2", L-6"1", W-3,2" -3 Inch Dia, Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest
32Leg Press Double: Features : -H-5"8", L-6"4", W-1"7" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest
33Providing and fixing benches with side panel casted in Cast Iron single piece and middle part is of mild steel. Approx. ht. is 700 mm and length is 1250 mm the carving work is as per enclosed drawing and details and instruction of engineer incharge.
34Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications : Area : 3.0 mtr x 2.50mtr. Safe play area : 4.0 mtr x 3.50 mtr. Height : 2.40 mtr. (on ground level) Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain (ISO : 9001-2000 make)
35Up and Down Ladder : Providing and Fixing of up-down ladder made out of MS pipe 40mm, 25mm size of length 10xheight should be less than 6" pipe should be
36Parallel bars : Parallel Bars is suitable for 10 to 16 years children and main verticle frame made of 50mm NB pipe and horizontal bars made of 32mm NB pipes. Horizontal bars having length 2.10 mtr. and height is 1.20 mtr. On ground level. Total area of this parallel is 2.0 mtr. x 1.0 mtr.
37Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr. Height : 0.90 mtr. Main Pipe : 50 NB pipe Plank : 40 NB pipe Handle : 20 NB pipe Seats : MS sheet (5mm thick) FRP (ISO : 9001-2000 make)
38Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail