Military Engineer Services-MES has published Repairs Replacement Of Defective V3f Drive Lops Cops Controller Cards, Travelling Cable And Other Misc Items For Johnson Otis And Ms Tke India Pvt. Ltd. Make Lifts At Various Location Under Geu Pm Delhi Cantt-10 Repairs Replacement Of Defective V3f Drive. Submission Date for this Tender is 18-01-2022. Cable Laying Tenders in DELHI CANTT Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2021 | Corrigendum No 1 | BOQ | 11-01-2022 |
| 2 | 11-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-01-2022 |
| Sl. No. | Item Description |
| 1 | Taking down/out unserviceable control panel and Supply,installations, commissioning and testing of of MICRO PROCESSOR and latest technology based controller SP3 panel along with travelling cable and complete shaft harness, all necessary wiring and all connected accessories for VVVF drive of 11 KW, 380/480 volts, 50 Hz as per sample suitable for 13 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) of serving Ground + Eight Floors (total Nine Landings) with electric power operated doors and comprising with following complete all as specified and as directed. (Make:- As per OEM recommendation). (i) Automatic call register and execution system. (ii) Automatic attendant system. (iii) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds. (iv) Over load/ low voltage/ single phase protections. (v) Make of drive:- Yaskawa/ Emerson/ Fuji. (vi) Automatic phase reversal system. (vii) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete. (viii) Cooling fan for air circulation in controller. (ix) Includeing COP, read switch, limit switch and decoder etc. with wiring. (x) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (xi) Arrangement of Fire main switch at ground floor with wiring complete. |
| 2 | NOTES for item No. 1.00:- (a) The Controller should compatible to run the lift G+ Eight floors (total nine landings) having cooling fan and sufficient space for VVVF drive. (b) Main VVVF drive should be provide with calibration pad & proper mounting in controller alongwith any other connectection as required. (c) Any other arrangement/ alteration for smooth functioning of lifts should be done by contractor with out any extra cost. (d) The control wiring shall be secured & confirmed to standard wiring practice & it should be proper fixing on wall/ in duct cover with clamping, saddling, etc. complete. (e) The controller shall be required to connect, transfer & interrupt power supply & protect the motor against over load. (f) During the execution of work any civil/ cement work done by contractor with own arrangement and no extra cost. |
| 3 | Supply, fixing, testing and commissioningARD 2.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work,suitable for all make lifts 13 passenger Lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 17AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed by Engr-in-Charge. (Make of ARD:- As per OEM recommendation).(Make of battary:- EXIDE/ AMARON/ STANDARD FURKKAVA) . |
| 4 | Supply,installations, commissioning and testing of IR door beam sensor 12V/ 0.2A with 20 Nos of diodes, pattern of cri-cross beams meeting the requirements of EN 81-20 with IP-65 ratings and housed in slim aluminium profile alongwith all fixing accessories suitable for 13 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 5 | Supply, installation,commissioning & testing of full SS Cabin Operated Panel (COP) with push box along with all connected accessories complete suitable for 13 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings)including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 6 | Supply, installation,commissioning & testing of full Landing Operating Panel (LOP) with latest Braille push botton along with all connected accessories complete suitable for 13 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings)including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 7 | Supply,installations, commissioning and testing of POD Door accessories {Door Roller (U & V Roller/ Bearing) , CW shoe liner, gate lock etc.} alongwith all fixing accessories suitable for 13 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 8 | Taking down/out unserviceable control panel and Supply,installations, commissioning and testing of of MICRO PROCESSOR and latest technology based controller SP3 panel along with travelling cable and complete shaft harness, all necessary wiring and all connected accessories for VVVF drive of 7.5 KW, 380/480 volts, 50 Hz as per sample suitable for 08 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) of serving Ground + Eight Floors (total Nine Landings) with electric power operated doors and comprising with following complete all as specified and as directed. (Make:- As per OEM recommendation). (i) Automatic call register and execution system. (ii) Automatic attendant system. (iii) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds. (iv) Over load/ low voltage/ single phase protections. (v) Make of drive:- Yaskawa/ Emerson/ Fuji. (vi) Automatic phase reversal system. (vii) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete. (viii) Cooling fan for air circulation in controller. (ix) Includeing COP, read switch, limit switch and decoder etc. with wiring. (x) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (xi) Arrangement of Fire main switch at ground floor with wiring complete. |
| 9 | NOTES for item No. 7.00:- (a) The Controller should compatible to run the lift G+ Eight floors (total nine landings) having cooling fan and sufficient space for VVVF drive. (b) Main VVVF drive should be provide with calibration pad & proper mounting in controller alongwith any other connectection as required. (c) Any other arrangement/ alteration for smooth functioning of lifts should be done by contractor with out any extra cost. (d) The control wiring shall be secured & confirmed to standard wiring practice & it should be proper fixing on wall/ in duct cover with clamping, saddling, etc. complete. (e) The controller shall be required to connect, transfer & interrupt power supply & protect the motor against over load. (f) During the execution of work any civil/ cement work done by contractor with own arrangement and no extra cost. |
| 10 | Supply, fixing, testing and commissioningARD 1.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work,suitable for all make lifts 08 passenger Lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 7AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed by Engr-in-Charge. (Make of ARD:- As per OEM recommendation).(Make of battary:- EXIDE/ AMARON/ STANDARD FURKKAVA) . |
| 11 | Supply, installation,commissioning & testing of door screen sensor full set along with all connected accessories complete suitable for 08 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings)including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 12 | Supply, installation,commissioning & testing of full SS Cabin Operated Panel (COP) with push box along with all connected accessories complete suitable for 08 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings)including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 13 | Supply, installation,commissioning & testing of full Landing Operating Panel (LOP) with latest Braille push botton along with all connected accessories complete suitable for 08 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings)including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 14 | Supply,installations, commissioning and testing of POD Door accessories {Door Roller (U & V Roller/ Bearing) , CW shoe liner, gate lock etc.} alongwith all fixing accessories suitable for 08 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation). |
| 15 | Supply,installation,commissioning and testing of Micro Processor and latest technology based control panel with AC VVVF drive of capacity 7.5 KW, 08 passenger lifts simplex selective/collective control complete serving Ground + 6 floor i.e total seven landings required PCC 1:2:4 type B1 (using 20mm graded crush stoneagggrgate) foundation as per existing size complete all as specified and directed by Engr-in-charge (Make of Panel:- M/s Otis elevator) comprising with the following: (i) Over load voltage/single phase protectons. (ii) Make of Drive:- Yaskawa/Emerson/Fuji. (iii) Automatic phase reversl system. (iv) Replacement of all old wiring with new wiring. (v) Replacement of old COP wiring with new COP wiring. (vi) Replacement of all read switches with wiring. (vii) Replacement of hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (viii) Arrangement of Fire main switch fixed at ground floor with proper wiring with control panel in all block. (viii) Arrangement of fire main switch with complete wiring. |
| 16 | NOTES for item No. 13.00:- (a) The Controller should compatible to run the lift G+6 floors having cooling fan and sufficient soace for VVVF drive. (b) Main VVVF drive should provide with calibration pad & proper mounting in controller alongwith any other connection as required. (c) Any other arrangement/alteration for smooth functioning of lift should be done by contractor with out any extra cost. (d) The control wiring shall be secured & confirmrd to standard wiring practice & it should be proper fixing on wall in duct cover with clamping,saddling, etc complete. (e) The contractor shall be required to connexct transfer & interrupt power supply & Protect the motor against over load. (f) During the execution work any civil/cement work done by contractor with own arrangement. |
| 17 | Notesfor item No.1.00 to 13.00 :- (i) The work shall be done throuhg respective OEM of existing liftsi.e. ofM/s Johnson Lifts Pvt Ltd and M/s Otis Elevator India. (ii) The contractor will have to submit MOU on stamp paper of Rs 100/- duly notarized, as per specified Performa given on page No 93 & 94fromrespective OEM of existing lifts i.e ofM/s Johnson Lifts Pvt Ltd and M/s Otis Elevator Indiawithin Twenty Eight days from date of Acceptance of tender.If the delay from OEM side to submit the MoU, the contractor to be submit evidence to the Accepting Officer and permission to be obtained from Accepting Officer for delay in submission of MoU. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
