Military Engineer Services-MES has published Repair Rep Of Pvc Flooring Tiling Works Aluminium Wooden Joinery, Railing, Ceiling Work, Tiling, Plastering, Plumbing And Sanitary Work In Sok Office, Ins Abhimanyu, Nad Dsc Complex, Jetty Bldgs, Mes Bldg, Nai Fodc, Nbcd Hard Chukar Squadron At. Submission Date for this Tender is 04-01-2022. Civil Work Tenders in GE NW KARANJA Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-01-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering as specified and as directed |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed |
| 4 | Complete Removal of existing water proofing treatment any descriptionup to concrete surface of roof slab including cleaning, with wire brushing, watering, removal of debris upto 1500 m distance complete all as specified and directed NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work |
| 5 | Demolition of cement concrete (unreinforced) roof or chajja padding of any description and any position not otherwise specifically provided for complete and PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed. |
| 6 | M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification.The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications.Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane including Ten years guarantee on prescribed form complete all as per particular specification , manufacturers instructions and as directed by Engineer-in-Charge. |
| 7 | M&L in repairs Aluminium / copper strips 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed. |
| 8 | S&F vitreous china porcelain insulator with busbar support white type, complete all as specified and directed including taking down old insulator. |
| 9 | M&L for PCC (1:2:4) type B0, using (12.5mm garded stone aggregate) blocks of size as per IE rules including necessary use and waste of form work as in grouting of porcelain insulatorcomplete all as specified and as directed. |
| 10 | M & L using ready mix plaster for rendering 10mm thick on roof top surface including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately |
| 11 | Supply only integral water proofing compound |
| 12 | Taking down chowkats or framesexc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed |
| 13 | As per Item No.12 above but n.exc 1.5 sqmcomplete all as specified and as directed |
| 14 | Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed. |
| 15 | S&F IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints. |
| 16 | S&F 35mm thick second class hard wood,plain framed, paneled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated . |
| 17 | S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified. |
| 18 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 19 | S & F extrudedaluminium alloy handles fabricated type anodized 150 mm size as specified and as directed |
| 20 | S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 21 | M&L mild steel Butt hinges medium weight, cold rolled and fixed 100 mm long as specified and as directed |
| 22 | S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 23 | S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 24 | M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 25 | M & L PCC 1:3:6, type C1 (using 20 mm graded agg) coping or filling for hold fast without using extra cement complete all as specified and directed. |
| 26 | Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 27 | M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 28 | S&F aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame& necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including rubber beading for 4 or 5mm thick glass, making good to the disturbed portion with its original specifications, complete all as specified and directed. |
| 29 | S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed. |
| 30 | M&L Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 31 | M&L for12mm thick vertical toughened glass as in door shutters/partition with and including stainless steel SS-304 patch fittings fixed with Anchor fastener, cutting to shape, drilling holes as required and all edges of glass shall be diamond polished.complete all as specified and directed. |
| 32 | M&L 4 mm thick plain glass sheets ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows/doors/partition etc all as specified and directed. |
| 33 | S & F rough cast wired glass 6.40 mm thickness and glazing with rubber beading or oil putty for windows/doors/partition etc all as specified and directed. |
| 34 | S&F aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod Fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed. Make of grill Deco grill or equivalent |
| 35 | M & L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed. |
| 36 | S & F in repair for aluminium (extruded section) body hydraulically door closer regaulted, designation No.3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. |
| 37 | S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width ofaperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed |
| 38 | S&F 14mm thick ceiling board of size 600mm x 600mm of RH-90 of Armstrong false ceiling complete all as specified and directed.(Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 39 | S&F 4 mm thick asbestos cement plain building board fixed to aluminium grid frame work in ceiling all as specified and directed.(Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 40 | M & L forpreparingasbestos & ceiling board surfaces and applyingtwo coatsofoil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.(Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 41 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 42 | S&F for5mmthick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specificationand drawing. |
| 43 | S&F for Solid PVC Wall Lining consisting of 5mm thick plain / design colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as per direction of Engr-in-Charge. |
| 44 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.(Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 45 | S&F Anodised aluminium snap grid of size 600x600 mm frame work for false ceiling complete all as specified and directed by Engr in Charge. |
| 46 | S&F Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 47 | S&F for PVC False ceiling consisting of 600 mm x 600 mm, 5 mm thick prelaminated self design PVC sheet of density 600 kg/cum solid PVC panel insert in a frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm MS rods of required size sato maintain for proper level etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete as per direction of Engr-in-charge, Manufacturer"s specification & drawing. |
| 48 | S&F false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 14mm thick ceiling board of RH-90. Grid shall be suspended from ceiling using 4mm dia pre straighten GI wire with 6mm nylon rawl plug & screws at 1200mm intervals complete all as manufacturers instructions and as directed by Engr-in-Charge. |
| 49 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 50 | Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed. |
| 51 | M&L prepration of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 53 | M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed. |
| 54 | M & L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed. |
| 55 | M&L glazed coloured ceramic tiles in vertical surface300x200x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:6etc complete all as specified and directed |
| 56 | M&L glazed coloured ceramic tiles in vertical surface450x300x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:6etc complete all as specified and directed |
| 57 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 15mm thick screed bed in CM 1:6complete all as specified and directed |
| 58 | S&F for exterior grade, fibre reinforced heavy duty cement concrete designer tiles 30+- 2mm thick layer colour pigmented as per IS 1237-1980Make-Ultra, Furocone or equivalent laid over and incluDing 15mm thick screed bed or beddng layer in CM 1:6 complete all as specified and directed. |
| 59 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thickbelow or above ground level un re-inforced complete all as specified and directed. . |
| 60 | M&L PCC 1:4:8 type D2, using (40 mm graded agg) ,100 mm thick asin sub base of flooring all as specified & directed |
| 61 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm hickompacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; ® 13122C Providing and, complete all as specified and directed. |
| 62 | M&L PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all aroundtile complete all as specified and directed. |
| 63 | S&F in repairs PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laidwith approved rubber based adhesive in floors all asspecified and directed. |
| 64 | M&L PCC 1:2:4 type B2, using (40 mm graded agg) ,100 mm thick asin flooring/Hardstanding all as specified & directed |
| 65 | M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed. |
| 66 | Taking down cement plaster on brick walls orstone walls etc includingraking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500mcomplete all as specified. |
| 67 | M&L using ready mix plaster for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coatand 5mm thick finishing coat) , finished even and smooth complete all as specified and directed.(Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 68 | M & L using ready mix plaster Rendering 8 mm thick on fair facesof brick work or concrete surfaces finished even and smooth including Sagol finish complete all as specified. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 69 | M&L rendering 5mm thick in CM 1:3 on ceiling finished even and smoothfinish complete all as specified and directed. |
| 70 | M & L for exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance.Thereafter wash the surface with clean water & allow to dry.Cut the crack portion "V" shape andFill visible cracks/jointis by Chemistic crackseal caulking compund & allow to dry for 24 Hours.Apply a primer coat of Chemistic Prime N Seal (water base primer) and allow to dry fopr 6 hours.Thereafter apply 02 coats of Chemistik PDS-50(WB high Build Anti Caronation Coating cum waterproffing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade. Rate quoted shall include for scaffolding to any height , covering etc, complete all as specified and directed by Engineer-in-charge |
| 71 | M & L for preparation of new or previously untreated plastered surfaces of wallsand applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage patternon one coat of primer complete all as specified and as directed |
| 72 | M & L forpreparingnewplasteredsurfacesof walls and applyingtwo coatsofoil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed. |
| 73 | M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed. |
| 74 | S& F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, 32mm dia PVC waste pipe, inlet ,outletetc complete all as specifiedand directed. |
| 75 | S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including 32mm dia PVC waste pipe complete all as specified and directed. |
| 76 | S&F in repairs 15 mmbore fancy type pillartaps castcopper alloywithcapstan heads chromiumplatedscreweddownhigh pressure withletteredhotorcoldwithlongscrewedshanksandfly nutsscrewedforiron pipe complete all as specified and directed. |
| 77 | S&F in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete beddingcomplete all as specified and directed. |
| 78 | S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repairscomplete all as specified and directed. |
| 79 | S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed. |
| 80 | S&F in repair for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed. |
| 81 | S&F in repairs fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified. |
| 82 | S&F in repairs fancy type chromium plated stop valves 15 mm borecast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unioncomplete all as specified and directed. |
| 83 | S&F in repair 15 mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 84 | Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories). |
| 85 | S & F plain galvanized mild steel sheeting 1 mm thick in ridge hips valley gutters drips and straight flashing welded or soldered joint complete all as specified |
| 86 | S&FBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified |
| 87 | S &F 150 mm dia PVC (SWR) pipes single socketedin any length with rubber ring joints fixed to wall including bends complete all as specified and directed. |
| 88 | S &F 110 mm dia PVC (SWR) pipes single socketedin any length with rubber ring joints fixed to wall. Complete all as specified and directed. |
| 89 | S &F 75 mm dia PVC (SWR) pipes single socketedin any length with rubber ring joints fixed to wallcomplete all as specified and directed. |
| 90 | S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed |
| 91 | S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed |
| 92 | M&L 600x450 mm beveled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building boardfixed to wall by wooden plug with chromium plated brass screw and cup washer fixed as in repair complete all as specified and directed. |
| 93 | Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc. and pre cast concrete articles complete all as specified and directed. |
| 94 | M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed |
| 95 | S&F in repair stainless steel hand railing with post as per design made out SS304 complete all as directed by engr in charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
