Renovation Of S.C. Shamshan Ghat, Backside Prtc Bus Stand At Budhlada
Tender Value
9.79 Lakhs
Estimated cost
Bid Submission
27 Dec 2021
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BUDHLADA → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of S.C. Shamshan Ghat, Backside Prtc Bus Stand At Budhlada
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Reinforced cement concrete |
| 2 | Dismantling brick work tile, masonry or tile lining in cement |
| 3 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 4 | Cement concrete 1:8:16 with stone ballast 40mm thick |
| 5 | Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. |
| 6 | First class burnt brick work laid in cement sand mortar 1:6 in foudation |
| 7 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 8 | 12.5 mm Thick Cement Plaster in 1:4 Cement sand mortar |
| 9 | 20mm thick cement plaster 1:4 in two coat work |
| 10 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code 15658 (2006) |
| 11 | Credit of Old Material i.e. Bricks |
| 12 | Bricks Bats |
| 13 | Steel |
| 14 | Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc. |
| 15 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 16 | Cold twisted deformed (Ribbed/ Tor Steel Bar)Bars Fe 500 grade as per IS 1786-1985, forR.C.C works, where not including in the completerate of RCC including bending and placing inposition complete |
| 17 | Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).. |
| 18 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directedwithin lead of 30 metres. |
| 19 | Cement Concrete 1:8:16 with stone ballast of size 40 mm Complete in all respect. |
| 20 | C.C. 1:3:6 Complete in all respect. |
| 21 | Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 22 | Providing andfixingprecoatedgalvanisediron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 7 microns epoxy primer |
| 23 | First class dry brick on edge flooring or paving in ordinary bonded courses or in herring bond or other special courses or bond |
AI Tender Summary
Tender Timeline
Dec 21, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender