Construction Of Health And Wellness Center In Chilla Block-Birdha Construction Of
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Dec 2021
0 days left
EMD
7200
Bank guarantee accepted
Document Fee
520
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CHILLA → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Health And Wellness Center In Chilla Block-Birdha Construction Of
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF HEALTH AND WELL NESS |
| 2 | Excavation in foundation in ordinary soil (loam clay, or moorum) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth. into the trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m(100fts) from the foundation trenches. as in item no. (251) above but excavation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes, sabbals etc. |
| 3 | Cement concrete with 4 cm (1.5\") gauge approved stone ballast approved coarse sand and cement in the proportion of 4 2: including supply of all materials, labour and T & P etc. required for proper completion of the work.As In een No. 279) above but in the proportion of 8:4: 1 - (L.C. in 1:4:8 ct :c/s: s/B (40mm) |
| 4 | R.C.R.stone masonery work in foundation in 1:6 cement:sand mortar including Supply of all Material labour T&P |
| 5 | First class brick Work in 1:6 cement and fine sand of 1.25 FM, mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work.(Brick work in 1:6 ct:c/s from g/l to p/l-) |
| 6 | Rcc work with cement approved coarse sand and 2 cm. (3/4\") gauge oPProved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but Including its fixing and binding the same with24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour &. T&p ate.required for proper completion of the work. Binding wire cost being. including in the item. (R.C.C. in 1:1,1/2:3 ct:c/s:s/g in tie beam & plinthBeam) |
| 7 | Rcc work with cement opproved coarse sand and 2 cm. (3/4\") gauge oPProved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but Including its fixing and binding the same with24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour &. T&p ate.required for proper completion of the work. Binding wire cost being. including in the item. as in item 283(1) above but in Rcc T beam and slab roofs and R.c.c. columns. |
| 8 | Rcc work with cement approved coarse sand and 2 cm. (3/4\") gauge oPProved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but Including its fixing and binding the same with24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour &. T&p ate.required for proper completion of the work. Binding wire cost being. including in the item. as in item 283(1) above but for slab. (R.c.c. in 1:1x1/2:3(ct:c/s:s/g) in Rcc Column |
| 9 | First class brick Work in 1:6 cement and fine sand of 1.25 FM, mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. As in item (301 to (304) above but in super structure, including necessary cutting and moulding of bricks as required and also - including honey comb brick work, thickness of wall not to be less than 1.5 brick thick. Add extra labor to ab OV e item in O. 301 to 304. as in item (309) above but for wall of one brick thick. add for extra labour.(Brick work in 1:6 ct:c/s mortor in super structure (23 cm thick) |
| 10 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 2 Consistingof one part yf cement and 2 parts of approved coarse sand laid in Panels, finished with 3 mm (1/8\"), floating, coat of neat cement or Genent and marble dust in ratio 51 including supply of materials abour and T&P etc. required for proper completion of the work. (Dado/skrt. in 1:2 (ct:c/s) 20mm with neatflush) |
| 11 | supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work, Supply of M.S. Grillofa approved quality- and drawing made of flat iron not bigger then 20x4 mm size including supply of materials, fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer-incharge for proper completion of work at site. (Rate Average of Z section + Grill)(92.80+82.49)/2=87.65with 10mm sq bar grill |
| 12 | supply of Ms. Angle iron windows ventilation frame made of approved M.S. angle iron Wroght to required form including drilling hole, Welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut 8 bolts etc. and also including all taxes, Wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of Work at site of work. |
| 13 | 6to10mm ceiling plaster in 1:3 cement:sand |
| 14 | 15 mm Cement plaster in single coat on fair side of single or hal brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. in girth and finished even and smooth. No extra for mixing any additive.IN ROUGH SURFACE OF WALL |
| 15 | 12 mm Cement plaster in single coat on fair side of single or hal brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. in girth and finished even and smooth. No extra for mixing any additive. |
| 16 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 2 Consistingof one part yf cement and 2 parts of approved coarse sand laid in Panels, finished with 3 mm (1/8\"), floating, coat of neat cement or Genent and marble dust in ratio 51 including supply of materials abour and T&P etc. required for proper completion of the work. (Dado/skrt. in 1:2 (ct:c/s) 20mm with neatflush) |
| 17 | earth filling in plinth including supply of necessary quantity of moorum from a distance not exceeding 8 Km.(5 miles) from the site of work and includingwatering,dressing etc. rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Rate is including Royllity) |
| 18 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc.required for proper completion of the work. (Rate is including Royality) |
| 19 | Cement concrete with 4 cm (1.5\") gauge approved stone ballast approved coarse sand and cement in the proportion of 4 2: including supply of all materials, labour and T & P etc. required for proper completion of the work.As In een No. 279) above but in the proportion of 8:4: 1 - (L.c. in 1:4:8 ct:c/s:s/B(40mm) in base ofapron & step.) |
| 20 | Cement concrete flooring 1:2:4 cement 2 coarse S. sandi: 4 graded stone aggregate of size 20 mm nomina size) laid in one layer finished with floating cost of nea cement:40 mm thick floor)(p.c.c. flooring in 1:2:4 ct:C/s:s/g in apron & stepetc.) |
| 21 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 2 Consistingof one part yf cement and 2 parts of approved coarse sand laid in Panels, finished with 3 mm (1/8\"), floating, coat of neat cement or Genent and marble dust in ratio 51 including supply of materials abour and T&P etc. required for proper completion of the work. (Dado/skrt. in 1:2 (ct:c/s) 20mm with neatflush) |
| 22 | providing & painting of two coate of apex wheather coate with primary coate of wall primer- out side |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | One priming coat &. Twocoat oil distemper on new St work including supply of all materials, labour and T&P etc. required for proper completion of the work. As in item 649 above but for every coat after the first coat. |
| 25 | Painting or Varnishing on iron works in small areas St. or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the Work Paint to be used should confirm to the I.S.I.No. 103 1950,Same as in item 641 above but for every coat after is Coat. Details of cost for 650 stfit. Area. |
| 26 | Providing and fixing glass stirrups in flooring 35x5mm size |
| 27 | Providing and fixing 4mm thick Glass pan in Window with putty & pins |
| 28 | Drip couse in 1:3 ct:c/s with all material labour T&P in sunshade and slab projection |
| 29 | Mild steel or iron in plain work such as Ot reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks. |
| 30 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 2 Consistingof one part yf cement and 2 parts of approved coarse sand laid in Panels, finished with 3 mm (1/8\"), floating, coat of neat cement or Genent and marble dust in ratio 51 including supply of materials abour and T&P etc. required for proper completion of the work. (Dado/skrt. in 1:2 (ct:c/s) 20mm with neatflush) |
| 31 | providing and fixing Granite stone over counter top |
| 32 | Providing and fixing Glazed tiles over conter top |
| 33 | Prooviding and fixing 20mm partical board covered |
| 34 | mosquito prof jali over window out side |
| 35 | Providing and fixing 300x300mm floor tile |
| 36 | Wring point for light with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside plano type switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect. |
| 37 | Wring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sqmm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside plano type switch & celling rose angle/batten holder on 3mm thick phenotic paminated backlite sheet etc. complete in all respect. |
| 38 | Wring point for plugwith 1.5 Sq. mm FRPVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside plano type switch & socket etc. complete in all respect. |
| 39 | Supply & Fixing of Water tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protection complete in all respects. CAT - AAA |
| 40 | S/F of 32 Amp. DP MCB (10KA) C Curve , CAT-A |
| 41 | S/F of 06 Amp to 32 Amp SPMCB (10KA) .CAT - B |
| 42 | S&F of Power plug with 15A/250volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. |
| 43 | Erection and testing of Ceiling Fan & regulator etc. excluding supply of down rod, complete in all respects. |
| 44 | S/F of 1200 mm Ceiling Fan ISI |
| 45 | S/F of LED 9 Watt |
| 46 | S/F of electronic fan regulator 120-280 V ISI marked ,on the existing switch board including making connections, required material, labour T/P etc. for proper completion of work to the satisfaction of Engineer in Charge of work. |
| 47 | Supply & wiring of submains with two number 4 sq.mm PVC insulated 1100 V grade multistrand single core copper conductor in 20mm dia heavy duty PVC conduit with 1 no. 2.5 sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. |
| 48 | S/F Surface/ flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A |
| 49 | Providing and fixing 6 sqm 2 core Service cable for electric connection from existing sub center building |
| 50 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests |
| 51 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:893115 mm nominal bore |
| 52 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 53 | Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P. brass chain with rubber plug, 40 mm C.P brass wasteand 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings Size 450x300x150 mm |
| 54 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
| 55 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 56 | Providing and fixing PTMT grating of approved quality and colour. 150 mm nominal size square 100 mm diameter of theinner hinged round grating |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 15 mm dia nominal bore |
| 58 | 20 mm dia nominal bore |
| 59 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 32 mm nominal bore |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 61 | Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc.Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge. 110mm Dia PVC SWR Pipe Type\"A\" |
| 62 | 75mm Dia PVC SWR Pipe Type\"A\" |
| 63 | Supply & fixing 100 dia inlet 75 mm (3”) outlet PVC Floortrap( Supreme / Prince) first quality, ISI marked and supported with brick masonry seat as per site requirement with standard practiceincluding cost and conveyance of all materials, taxes, labour charges etc, completeand as directed by theas direcyted by the Engineer-in-charge. |
| 64 | CONSTRUCTION OF SOCK PIT |
AI Tender Summary
Tender Timeline
Dec 20, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender