|
| 1 | Receptacle, 250 faston, PIDG 14-16 AWG |
| 2 | Tubing |
| 3 | Nut, hex, jam (1.50-12 UNF) (AP) |
| 4 | Plug, button |
| 5 | Spring, hold-down (AP) |
| 6 | Cord connector (0.75 hub, 0.25 to 0.38 cord dia) |
| 7 | Tubing assembly |
| 8 | Tubing assembly |
| 9 | Tubing assembly |
| 10 | Brake assembly (LH) (Front) |
| 11 | Brake assembly (RH) (Front) |
| 12 | Brake assembly (RH) (Rear) |
| 13 | Brake assembly (LH) (Rear) |
| 14 | Cable assembly WA |
| 15 | Cable assembly WB |
| 16 | Cable assembly WC |
| 17 | Cable assembly WD |
| 18 | Cable assembly WE |
| 19 | Cable assembly WF |
| 20 | Cable assembly WG |
| 21 | Cable assembly WJ |
| 22 | Cable assembly w23 |
| 23 | Cable assembly w24 |
| 24 | Cable assembly w25 |
| 25 | Cable assembly w26 |
| 26 | Cable assembly w27 |
| 27 | Fuse 1fu, ceramic tube |
| 28 | Fuse 2fu, ceramic tube |
| 29 | Boot, full pushbutton |
| 30 | Varistor, axial lead disc |
| 31 | 7-Pole socket J |
| 32 | Cover, trailer |
| 33 | Tread kit, non-skid |
| 34 | Spool |
| 35 | Non-skid tread kit |
| 36 | Clip assembly, twin spare fuses |
| 37 | Adapter, 8NC, female, panel mount |
| 38 | Boot |
| 39 | DB9 male-female R/A adapter |
| 40 | Connector, modular, 4 conductor, surface mount |
| 41 | Caplug, flush type |
| 42 | Body, connector, 0.375 tube |
| 43 | Hose assembly, hydraulic brake |
| 44 | Tubing plug |
| 45 | Gasket, copper |
| 46 | Tee, axle |
| 47 | Coupling, quick disconnect (male half) |
| 48 | Body, union, 0.375 tube |
| 49 | Tubing, teflon insulated |
| 50 | Body, connector, tube, O-ring 0.25 tube |
| 51 | Link, double clevis (AP) |
| 52 | Adapter, hydraulic brake |
| 53 | Coupling-half, male, quick disconnect (0.375 x 18) |
| 54 | Coupling-half, female, quick-disconnect (0.375 x 18) |
| 55 | Hose clamp, worm drive |
| 56 | Body, elbow, hyd, tube, 0.562-18 |
| 57 | Body, elbow, hyd, 0.75 tube, male x 0.75 SAE, male |
| 58 | Body, tee, 0.375 tube |
| 59 | Body, union, hyd, 0.5 tube, male x 0.375 tube, male |
| 60 | Adapter, conversion |
| 61 | Elbow, hydraulic, boss, 1.25 tube, male x 1.25 SAE, male |
| 62 | Union, female |
| 63 | Hose assembly, hydraulic brake |
| 64 | Bushing, screw thread, reducer |
| 65 | Hose assembly |
| 66 | Straight connector, cable |
| 67 | Plug, knockout |
| 68 | Dust plug with chain, quick disconnect coupling |
| 69 | Coupling, quick disconnect, female |
| 70 | Hose assembly, male thread both ends (0.5-14) |
| 71 | Cable assembly, ribbon, module interconnect |
| 72 | Fitting, cord and cable |
| 73 | Straight connector, cable |
| 74 | 7-Pole plug P1 |
| 75 | Straight connector, cable |
| 76 | Cord connector, 90º |
| 77 | Fitting, cable |
| 78 | O-Ring |
| 79 | Hammer, hand drilling |
| 80 | Cable, power supply, w/386A plug |
| 81 | SCREW,CAP,HEXHD |
| 82 | KEY STATOR DRIVE |
| 83 | KEY WATER NOZZLE |
| 84 | CLAMP |
| 85 | WASHER, FLAT, NO. 10 |
| 86 | KEY BENDIX 6 ROTOR |
| 87 | SCREW, SET,SOCKET HEAD,HALF DOG,0.375-16 UNC-2B |
| 88 | LOCKWASHER, SPRING (M10) |
| 89 | Stake Drive |
| 90 | STUD |
| 91 | RIVET |
| 92 | CONNECTOR, STR MALE CORD, ALUM |
| 93 | SCREW,CAP,HEXHD |
| 94 | KEY WATER NOZZLE |
| 95 | ELBOW,90, 0.75 TUBE MALEX0.75NPT, FEMALE |
| 96 | PACKING, O RING, 1.25 TUBE |
| 97 | BACK-UP RING,0.75 TUBE |
| 98 | ELBOW,HYDRAULIC,BOSS,0.75 TUBE, MALEX0.75 SAE |
| 99 | PLUG,HYDRAULIC,STRAIGHT THREAD, O-RING,0.75TUBE |
| 100 | GASKET |
| 101 | SEAT RING |
| 102 | SPRING-COMPRESSION |
| 103 | GLAND |
| 104 | SWITCH, PUSHBUTTON |
| 105 | BODY,CONNECTOR,0.75 TUBE-0.75-14 NPTF MALE |
| 106 | BODY,CONNECTOR,0.75 TUBE-1.0625-12 STR THD |
| 107 | UNION,HYDRAULIC,TUBE,1.25 TUBE, MALEX1.25, MALE |
| 108 | HEAT SHRINK TUBING, .945 ID |
| 109 | O RING |
| 110 | STROBE LIGHT |
| 111 | RING TERMINAL |
| 112 | Female disconnect |
| 113 | Male tab |
| 114 | BOOT |
| 115 | Lamp, 24v |
| 116 | SCREW, CAP,HEX HD |
| 117 | ANTISEIZE COMPOUND |
| 118 | BALL LOCK PIN |
| 119 | STRAIGHT CABLE FITTING |
| 120 | HOSE ASSEMBLY, HYDRAULIC |
| 121 | LIMIT SWITCH ASSY (SPARES) |
| 122 | LIMIT SWITCH ASSY (SPARES) |
| 123 | ADAPTER, RIGHT ANGLE |
| 124 | Washer, lock (0.25) (AP) |
| 125 | Lock washer (0.375) (AP) |
| 126 | Screw, pan hd, self tapping (#10-32 UNF x 0.375 lg) (AP) |
| 127 | Screw, cap, button hd (0.375-16 UNC-3A x 0.625 lg) (AP) |
| 128 | Nut, hex, 0.5-13 UNC (AP) |
| 129 | Screw, cap, hex hd (0.25-20 UNC x 0.625 lg) (AP) |
| 130 | Washer, lock (0.25) (AP) |
| 131 | Screw, pan hd, self tapping (0-32 UNF x 0.38 lg) |
| 132 | Washer, lock (0.625) (AP) |
| 133 | Rivet (AP) |
| 134 | Nut, hex, self lkg (0.25-20 UNC) (AP) |
| 135 | FLAT WASHER |
| 136 | Hex nut (0.3125-18) |
| 137 | Screw, cap, hex hd (0.25-20 UNC x 0.5 lg) (AP) |
| 138 | Flat washer (0.375) (AP) |
| 139 | Screw, cap, sochd (0.3125-18 UNC x 0.75 lg) (AP) |
| 140 | Screw, machine, pan hd (#10-32 UNF x 0.62 lg) (AP) |
| 141 | Union |
| 142 | Screw, machine, pan hd (#10-32 UNC x 0.5 lg) (AP) |
| 143 | Flat washer (AP) |
| 144 | Rivet, blind |
| 145 | Screw, machine, rndhd (#10-32 UNF x 1.0 lg) (AP) |
| 146 | Elbow, male |
| 147 | Elbow, union (AP) |
| 148 | Clamp |
| 149 | STATER PLATE ASSY |
| 150 | Pin, cotter (0.19 x 2 .5 Ig) (AP) |
| 151 | Nut, hex, (1.0-8 UNC) (AP) |
| 152 | RUBBER SPRING |
| 153 | Elbow, hydraulic tube swivel |
| 154 | CONE OUTER BEARING |
| 155 | O-Ring |
| 156 | Nut, hex, castellated (1.25-12 UNF) (AP) |
| 157 | Screw, cap, hex hd (1.0-8 UNC x 3.5 lg) (AP) |
| 158 | Packing, O-ring |
| 159 | Nut, hex jam (1.25-12 UNF) (AP) |
| 160 | BUSHING |
| 161 | Knife, fixed blade utility |
| 162 | Straight connector, cable |
| 163 | Clip, tube, double-line |
| 164 | Screw, cap, hex hd (0.25-20 UNC x 0.75 lg) (AP) |
| 165 | Screw, cap, hex hd (0.375-16 UNC x 1.25 lg) (AP) |
| 166 | Nut, self-locking, 0.562-18 UNF (AP) |
| 167 | Screw, cap, hex hd (0.5-13 UNC x 0.5 lg) (AP) |
| 168 | Screw, cap, hex hd (0.25-20 UNC x 1.0 lg) (AP) |
| 169 | Nut adjuster |
| 170 | Nut, hex, self lkg (#10-32) (AP) |
| 171 | Lock ring, (0.75) |
| 172 | Strip |
| 173 | Shield, double expansion |
| 174 | Wire joint, crimp-on (AP) |
| 175 | Grommet |
| 176 | Washer, flat (2.5 OD x 1.31 ID) (AP) |
| 177 | Screw, cap, hex hd (0.5-13 UNC x 1.25 lg) (AP) |
| 178 | Keeper chain assembly (AP) |
| 179 | Adapter, hyd, pipe, O-ring, 0.375 male x 0.25 NPT, female |
| 180 | Cone, inner bearing |
| 181 | Cup, inner bearing |
| 182 | Cup, outer bearing |
| 183 | Seal, grease |
| 184 | Screw, cap, hex hd (0.4375-20 UNF x 1.5 lg) (AP) |
| 185 | Restraint assy, lateral |
| 186 | Screw, cap, hex hd (0.5-13 UNC x 1.75 lg) (AP) |
| 187 | Ring terminal |
| 188 | Screw, cap, hex hd (0.375-16 UNC x 0.75 lg) (AP) |
| 189 | Coupling, quick disconnect, female half |
| 190 | Button, contact |
| 191 | Cover, dust |
| 192 | Bolt, shoulder eye |
| 193 | Tubing, hydraulic |
| 194 | Adjustable clamp rest (AP) |
| 195 | Toggle pin assembly |
| 196 | Hose assembly |
| 197 | Link, master (weldless) |
| 198 | Hydraulic tubing |
| 199 | Unitized center bolt mount |
| 200 | Cylindrical rubber mount |
| 201 | Guide clamp, towbar |
| 202 | Battery isolator |
| 203 | Nut, hex (0.3125-24) (AP) |
| 204 | Spacer |
| 205 | U-bolt, full circle (AP) |
| 206 | Hose, heater |
| 207 | Bolt snap, open eye (AP) |
| 208 | Handle |
| 209 | Screw, cap, hex hd (0.375-16 UNC x 7.0 lg) (AP) |
| 210 | Threaded rod |
| 211 | Pin, clevis (0.375) (AP) |
| 212 | Shaft, idler (w/set collar) |
| 213 | Bracket assembly |
| 214 | Clamp, cable |
| 215 | Clevis pin (0.3125) (AP) |
| 216 | Pillow block |
| 217 | Shaft collar (w/setscrew) |
| 218 | Bearing, spherical roller |
| 219 | Button bumper |
| 220 | Rope, filament nylon (0.375 in. x 75.0 ft. lg) |
| 221 | Shim, 0.031 |
| 222 | Bushing, taper-lock (w/2 setscrews) |
| 223 | Chain, roller |
| 224 | Chain, roller |
| 225 | Flexible shaft |
| 226 | Adapter right angle |
| 227 | Pinion drive unit |
| 228 | Coupling, flexible (w/2 setscrews) |
| 229 | Tachometer |
| 230 | Hydraulic swivel joint |
| 231 | Clamp, tape |
| 232 | Clevis, 3 |
| 233 | Hose assembly, return |
| 234 | Shim, 0.046 |
| 235 | Pin, ball lock (AP) |
| 236 | Screw, pan hd, self tapping (#6-32 UNF x 0.25 lg) |
| 237 | Gasket, rubber |
| 238 | Nameplate, Warning |
| 239 | Nameplate, Warning |
| 240 | Label, battery replacement |
| 241 | Wire rope |
| 242 | Washer, flat, 0.5 nom (AP) |
| 243 | Washer, high strength, 0.75 nom (AP) |
| 244 | Nut, self locking, hex, 0.5-20 UNJF-3B (AP) |
| 245 | Screw, cap, sochd, 0.375-16 UNC-3A x 0.25 lg (AP) |
| 246 | Washer, flat, 0.625 nom (AP) |
| 247 | Washer, flat, 0.312 nom (AP) |
| 248 | Nut, hex, self locking, 0.375-16 UNC-3B (AP) |
| 249 | Nut, hex, self-locking, 0.4375-14 UNC-3B (AP) |
| 250 | Screw, cap, sochd (0.375-16 UNC x 3.0 lg) (AP) |
| 251 | Washer, flat, 0.25 nom (AP) |
| 252 | Screw, cap, sochd, 0.75-10 UNC-3A x 3.5 lg |
| 253 | Nut, hex, self locking, 0.75-10 UNC-3B |
| 254 | Flat washer (0.375) (AP) |
| 255 | Pin, spring |
| 256 | Washer, flat, 0.562 nom (AP) |
| 257 | Clamp, loop, plain, support, aircraft, rigid tube, OD 0.375 nom |
| 258 | Screw, cap, sochd, 0.625-11 UNC-3A x 3.50 lg (AP) |
| 259 | Key, machine square, 0.375 x 0.375 x 7.0 lg |
| 260 | Nut, hex, self-locking, #10-32 UNF-3B (AP) |
| 261 | Bearing, ball |
| 262 | Pin, straight, headed (1.0 dia) (AP) |
| 263 | Tubing assembly |
| 264 | Tubing assembly |
| 265 | Hose assembly, fuel |
| 266 | Plunger, full travel, spring retractable |
| 267 | Key, mach, sq, 0.375 x 0.375 x 2.0 lg (control side of reel only) |
| 268 | Key, machine – square, 0.5 x 2.0 lg |
| 269 | Plug, quick disconnect, male |
| 270 | Washer, flat (0.375) (AP) |
| 271 | Tubing, hydraulic |
| 272 | Tubing, hydraulic |
| 273 | Tubing, hydraulic |
| 274 | Tubing, hydraulic |
| 275 | Tubing, hydraulic |
| 276 | Tubing, hydraulic |
| 277 | Tubing, hydraulic |
| 278 | Tubing, hydraulic |
| 279 | Nameplate (switches) |
| 280 | Cable assembly, system interface |
| 281 | Tower Control Panel |
| 282 | Washer, lock-spring, helical (0.375) (AP) |
| 283 | Washer, lock-spring, helical (0.250) (AP) |
| 284 | Washer, lock (0.5) (AP) |
| 285 | Screw, cap, sochd, drilled, 0.3125-18 UNC-3A x 0.875 lg (AP) |
| 286 | Washer, flat, 0.5 nom (AP) |
| 287 | Washer, flat, 0.25 nom (AP) |
| 288 | Screw, cap, sochd, 0.5-13 UNC-3A x 1.25 lg (AP) |
| 289 | Washer, lock-spring, helical (0.3125) (AP) |
| 290 | Washer, flat, 0.375 nom (AP) |
| 291 | Washer, flat, 0.375 nom |
| 292 | Washer, split lock (#10) (AP) |
| 293 | Nut, hex, self-locking (0.375-16 UNC) (AP) |
| 294 | Screw, Machine, pan hd, #10-24 UNC-2A x 0.375 lg (AP) |
| 295 | Washer, lock, flat – internal tooth #10 (AP) |
| 296 | Nut, self locking hex, 0.312-18 UNC-2B (AP) |
| 297 | Packing, preformed |
| 298 | Washer, split lock (#8) (AP) |
| 299 | Nut, hex, #8-32 UNC-2B (AP) |
| 300 | Nut, hex, 0.625-11 UNC-2B (AP) |
| 301 | Screw, machine, pan hd, #10-32 UNF-2A x 0.625 lg (AP) |
| 302 | Washer, flat (#4) (AP) |
| 303 | Washer, split lock (#4) (AP) |
| 304 | Nut, hex (0.3125-18 UNC) (AP) |
| 305 | Nut, hex (0.375-16 UNC) (AP) |
| 306 | Nut, hex (#4-40 UNF) (AP) |
| 307 | Screw, machine, pan hd (#4-40 UNC-2A x 0.5 lg) (AP) |
| 308 | Washer, lock-spring helical (0.2 ID x 0.334 OD x 0.047 thk) |
| 309 | Nut, hex (#10-24 UNC-2B) (AP) |
| 310 | Pin, cotter, split |
| 311 | Cover, receptacle |
| 312 | Clamp, loop type, cushioned support |
| 313 | Clamp, loop, cushion |
| 314 | Pin, cotter (split), 0.188 nom x 2.5 (AP) |
| 315 | Strap, tiedown |
| 316 | Screw, pan hd, #10-24 UNC -2B x 0.56 lg (AP) |
| 317 | Switch, toggle, S6 (four pole) |
| 318 | Washer, split lock (#6) (AP) |
| 319 | Nut, hex (#6-32 UNC-2B) (AP) |
| 320 | Connector, receptacle |
| 321 | Connector, receptacle |
| 322 | Screw, cap, hex hd, 0.25-20 UNC-2A x 1.125 lg (AP) |
| 323 | Nut, plain, hex, 0.375-16 UNC-2B (AP) |
| 324 | Screw, hex hd cap (0.375-16 UNC x 1.5 lg) (AP) |
| 325 | Nut, plain, hex, 0.5-13 UNC-2B (AP) |
| 326 | Nut, hex plain, 0.3125-18 UNC-2B (AP) |
| 327 | Screw, cap, hex hd, 0.375-16 UNC-2A x 1.75 lg (AP) |
| 328 | Screw, cap, hex hd, 0.312-18 UNC-2A x 1.25 lg (AP) |
| 329 | NUT,SELF-LOCKING, HES,0.375-24 UNF-3B |
| 330 | Nut, hex, 0.4375-14 UNC-2B (AP) |
| 331 | Screw, cap, hex hd, 0.5-13 UNC-2A x 2.0 lg (AP) |
| 332 | Nut, plain, hex, 0.25-20 UNC-2B (AP) |
| 333 | Grommet, synthetic rubber, split |
| 334 | Screw, cap, hex hd, 0.375-16 UNC-2A x 1.25 lg |
| 335 | Screw, hex hd cap (0.375-16 UNC x 0.75 lg) (AP) |
| 336 | LOCKWASHER 5/8 |
| 337 | SCREW,CAP, SOC HD, SELF-LOCKING,#10-24 UNC-3AX1.75LG (AP) |
| 338 | Screw, machine, pan hd, #8-32 UNC-2A x 0.5 lg (AP) |
| 339 | Screw, cap, hex hd, 0.5-13 UNC-2A x 2.75 lg (AP) |
| 340 | SCREW,CAP,HEX HD, 0.625-11 UNC-2AX1.5LG(AP) |
| 341 | Screw, hex hd cap (0.250-20 UNC x 0.625 lg) (AP) |
| 342 | Screw, cap, hex hd, 0.375-16 UNC-2A x 1.12 lg (AP) |
| 343 | SCREW,CAP,HEX HD,0.375-16 UNC-3B (AP) |
| 344 | Screw, cap, hex hd, 0.25-20 UNC-2A x 1.0 lg (AP) |
| 345 | NUT,JAM,HEX 0.375-24 UNF-3B |
| 346 | Screw, cap, hex hd, 0.5-13 UNC-2A x 2.25 lg (AP) |
| 347 | Screw, cap, sochd, 0.5-13 UNC-2A x 3.25 lg |
| 348 | Screw, cap, hex hd, 0.5-13 UNC-2A x 4.0 lg (AP) |
| 349 | Screw, cap, hex hd, 0.25-20 UNC-2A x 3.25 lg (AP) |
| 350 | SPRING, EXTENSION |
| 351 | ROLLER BEARING |
| 352 | NUT,TUBE,0.75 |
| 353 | Screw, machine, pan hd, #10-24 UNC-2A x 0.75 lg (AP) |
| 354 | PLUG, QUICK-DISCONNECT, FEMALE |
| 355 | Screw, pan hd, cross recess (0.138-32 UNC-2A x 0.63 lg) |
| 356 | Screw, cap, hex hd, 0.5-13 UNC-2A x 0.625 lg (AP) |
| 357 | VHF RADIO REPLACEMENT KIT |
| 358 | DECAL, ELECTRICAL SCHEMATIC |
| 359 | TRAILER LIGHT SYSTEM ELECTRICAL SCHEMATIC |
| 360 | TRAILER LIGHT SYSTEM CONNECTION DIAGRAM |
| 361 | Screw, pan hd, cross recess (0.190-24 UNC-2A x 0.438 lg) |
| 362 | LOCKWASHER 9/16 |
| 363 | FLATWASHER |
| 364 | SCREW,CAP,HEX HD |
| 365 | SCREW,CAP,SOCHD,.LOW HEIGHT |
| 366 | FLAT WASHER 1/2 AL |
| 367 | SCREW,CAP,SOCHD |
| 368 | SCREW,CAP,SOC,FL THD |
| 369 | TURNBUCKLE ASSEMBLY |
| 370 | BOLT TAPE REEL |
| 371 | SCREW PIN ANCHOR SHACKLE |
| 372 | SLING, WEB, POLYESTER |
| 373 | SCREW CAP SOC HD |
| 374 | SCREW,CAP,SOC,FL THD |
| 375 | SCREW,CAP,HEXHD |
| 376 | BUSHING, SCREW THREAD,EXPANDER |
| 377 | RETAINING COMPOUND, GREEN |
| 378 | Terminal board tb1 |
| 379 | ALTERNATOR FOR DUETZ ENGINE |
| 380 | CABLE HARNESS |
| 381 | FUEL LINE |
| 382 | STARTER |
| 383 | FUEL LINE HOSE |
| 384 | TUBING KIT FOR SPARES |
| 385 | TUBING KIT |
| 386 | TUBING ASSY |
| 387 | TUBING KIT FOR SPARES USE |
| 388 | TUBING ASSY FOR SPARES USE |
| 389 | TUBING KIT FOR SPARES |
| 390 | TUBING KIT FOR SPARES |
| 391 | TUBING KI |
| 392 | TUBING KIT |
| 393 | TUBING KIT FOR SPARES |
| 394 | TUBING KIT FOR SPARES |
| 395 | TUBING KIT FOR SPARES |
| 396 | TUBING KIT FOR SPARES |
| 397 | COVER, RAIN, RELAY OEUTZ OIESE |
| 398 | SCREW,MACH,PANHO,XREC |
| 399 | DEUTZ TIER 2 F4L2011 HARNESS |
| 400 | NARROW V-BELT, DEUTZ MOTOR |
| 401 | PHOTO ANODIZED LABEL |
| 402 | FLANGE BEARING |
| 403 | ADHESIVE, SUPERBONDER |
| 404 | GROMMET, BLK RUBBER |
| 405 | LABEL |
| 406 | LICENSE LAMP ASSEMBLY |
| 407 | CABLE ASSEMBLY, STEEL, 8 IN LG |
| 408 | COVER KIT, TRAILER, NET STANCH |
| 409 | LOCAL CNTL ENCLOSURE ASSEMBLY |
| 410 | SCREW,MACH,PANHO, 10-24X.63 |
| 411 | BAK-12 CLUTCH LABEL KIT |
| 412 | CENTRAL CONTROL UNIT (CCU) POW |
| 413 | LOCK WASHER |
| 414 | Hitch pin clip |
| 415 | O-ring |
| 416 | BOLT HEX HD |
| 417 | Screw, cap, hex hd, 0.375-16 UNC-2A x 1.0 lg (AP) |
| 418 | ROTOR PLATE ASSY |
| 419 | Washer, flat, 0.75 nom |
| 420 | LOCKNUT (70009-101) |
| 421 | RETAINING RING |
| 422 | Reducer, external thread |
| 423 | Connector, reducing, female to male |
| 424 | Jaw and turnbuckle |
| 425 | Washer, flat, 0.310 (AP) |
| 426 | Sling, nylon web |
| 427 | Pin, clevis |
| 428 | Elbow, 90° male (1/4 NPT-0.25 tube) |
| 429 | Fuse block |
| 430 | Cable, scada pack processor |
| 431 | HITCH PIN CLIP |
| 432 | Hand pump |
| 433 | RELIEF VALVE |
| 434 | Hose assembly, fuel |
| 435 | Tie-rod end |
| 436 | Tie-rod end |
| 437 | Tubing, hydraulic |
| 438 | Bolt, hex (0.25-28 x 0.53 lg) (AP) |
| 439 | Manifold, sealing |
| 440 | Hydraulic cylinder |
| 441 | Fuse block, single pole |
| 442 | Converter, DC to DC |
| 443 | Hydrulic Cylinder |
| 444 | Cable assembly, radio |
| 445 | Antenna assembly, mobile 132-174 MHz |
| 446 | WASHER FLAT |
| 447 | SCREW,CAP,HEXHD |
| 448 | PISTON ASSY |
| 449 | COTTER PIN |
| 450 | SCREW SHOCKET HP |
| 451 | PIN, LEVER PLATE |
| 452 | BRAKE DRUM |
| 453 | FLAT WASHER |
| 454 | CAP SCREW HEX HD |
| 455 | SCREW HEX HD CAP |
| 456 | HYDRULIC CYLINDER |
| 457 | Connector, male |
| 458 | Body, tee, hyd, 0.375 tube, male x 0.375 SAE male |
| 459 | SCREW FIT SOC |
| 460 | Tape punch (0.375 in) |
| 461 | Cylinder assy, hydraulic |
| 462 | Cylinder assy, hydraulic |
| 463 | Bolt, towbar pivot (0.125-12 UNF x 12.0 lg) (AP) |
| 464 | SNAP RING |
| 465 | Elbow (AP) |
| 466 | NUT LOCK |
| 467 | PIN |
| 468 | 12 POLE 24V PLUG |
| 469 | CABLE ASSEMBLY WJ |
| 470 | Connector, male, 37° flare |
| 471 | PIN |
| 472 | GUY WIRE ASSY |
| 473 | Cap, round |
| 474 | Chain, motor to trunnion |
