|
| 1 | Earth work in excavation all kinds of soil by mechanical means (hydraulic excavator) in foundation trenches, drains including dressing of sides ramming of bottoms, all lifts, leads including disposal of surplus excavated soil outside municipal limits or as per directions of EIC complete. |
| 2 | Supplying and laying of Nallah Dry stone soling hand packed tightly including ramming, watering and filling of interstices including all carriages complete. |
| 3 | Providing and laying in position cement concrete 1:4:8 (1Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including curing but excluding the cost of centering and shuttering. All work up to plinth level but including all carriage of materials as involved upto site of work complete. |
| 4 | Dry random rubble masonry with hardstone upto required height / depth using quarry stone with bond stones including allcarriage of materials as involved upto site of work complete. |
| 5 | Providing and laying in position cement concrete: 1:3:6(1Cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed excluding the cost of centering and shuttering. All work up to plinth level including carriage of all materials as involved upto site of work complete. |
| 6 | Brick work with common burnt clay F.P.S bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 fine sand) in foundation and plinth upto floor V level or upto required heightincluding carriages of material as involved upto site of work. |
| 7 | Providing and laying in position of reinforced cement concrete1:1.5:3 (1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Crushed including curing but excluding the cost of centering, shuttering, finishing and reinforcement- All works upto plinth level including all carriage of material as involved upto site of work complete. |
| 8 | Reinforced cement concrete work 1:1.5:3 (1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Crushed for beams, suspended floors etc, including curing but excluding cost of centering, shuttering, finishing and reinforcement including all carriage of material as involved upto site of work complete. |
| 9 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars including all carriages complete. |
| 10 | Centering and shuttering including strutting, propping etc and removal of form work for. |
| 11 | a) Foundations, footings bases of columns etc. |
| 12 | b) Wall any thickness. |
| 13 | c) Suspended floors, etc. |
| 14 | Providing and fixing of Budloo wood work in frames of false ceiling, partitions etc. sawn and fixed in positions including all fixtures as involved and carriage upto site of work complete. |
| 15 | Structural steel work welded in built up sections, and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including all lifts, leads and carriages upto site of work complete. |
| 16 | 15mm cement plaster of mix 1:4 (1 cement: 4 fine sand) including all carriages as involved upto site of work complete. |
| 17 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, 50mm thick with 20mm nominal size stone aggregate. Crushed including carriage of materials as involved upto site work complete. |
| 18 | Providing and fixing 1st quality ceramic glazed wall tiles size 30x45cm conforming to IS: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colors, shades and size as approved by Engineer In Charge in walls skirting, riser of steps and dodos over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade including all carriages of materials as involved upto site of work. |
| 19 | Providing and laying vitrified floor tiles (anti-skid) of size 300x300mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% approved make in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigment including cleaning the floor after finishing of work etc. including carriage of all materials as involved upto site of work complete. |
| 20 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface prepare the surface even and smooth complete. |
| 21 | Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware / Hind ware /Cera with all fittings C.I / M.S brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangements with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern White vitreous china W, C. pan of size 580mmx440mm with integral type foot rests. |
| 22 | Providing and fixing paneled or paneled and glazed shutters for doors, windows including ISI marked M.S pressd Butt hinges bright finished of required size with necessary screws including glazing / paneling K.D wood 35mm thick including all hardware fittings complete. |
| 23 | Providing and fixing of plained eaves boarding of second class kail wood of 300x40mm (nominal size) including all carriage of material as involved up to site of work complete |
| 24 | Providing and fixing of soffits made out 12mm thick imported wood planks including underneath frame work and scaffolding carriage complete (Budloo work) |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Budloo wood including all carriage of materials as involved upto site of work complete. |
| 26 | Providing and fixing of G.I pipes with clamps (Type B) and G.I fittings of approved brand and manufacture includingtrenching and refilling etc external work complete. |
| 27 | a) 15mm dia. |
| 28 | b) 20mm dia. |
| 29 | Providing and fixing PVC pipes (prince make) Type-B and PVC fittings of approved quality. |
| 30 | a) 100mm pipe |
| 31 | b) 75mm pipe |
| 32 | c) Door Tee 100mm. |
| 33 | d) Collar 100mm. |
| 34 | e) Collar 75mm. |
| 35 | f) Reducer 100x75mm |
| 36 | g) Plain bend 100mm |
| 37 | h) Plain bend 75mm |
| 38 | i) Door bend 100mm. |
| 39 | j) Door bend 75mm |
| 40 | k) Cowl and clif. |
| 41 | Providing and fixing of C.P fittings of Jaquar make. |
| 42 | a) 15mm dia Bib cock. |
| 43 | b) 15mm C.P Brass angle valve. |
| 44 | c) Ball Value. |
| 45 | d) 20mm dia 1 gate valve with wheel. |
| 46 | Construction of 225mm thickbrick masonary manhole in cement mortor 1:4( 1 cement :4 coarse sand ) RCC top slab with 1:1.5:3 mix (1 cement :1.5coarse sand : 3 graded stone aggregate 20mm nominal size ) foundation concrete1:4:8 mix ( 1 cement :4coarse sand : 8 graded stone aggregate 40mm nominal size ) insideplastering 12mm thick with cement mortor 1:3 ( 1 cement :3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) finished with a floating coat of neat cement complete as perstandard design , inside size 450 x 450mm including CI cover with frame andcarriage of all materials as involved complete. |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank triple layer ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet, ball cock and overflow pipes but without fittings and the base support for tank {Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license} including all carriage upto site of work complete. |
| 48 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 49 | Painting with syntenic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats complete. |
| 50 | Marble stone flooringwith 16mm average thick marble stone ( sample of marble shall be approved byEngineerIncharge ) over 20mm average thickbase of cement mortor 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry including rubbing and polishing complete. ( Udaipur green marble ) including all carriages of material as involved upto site of work complete. |
| 51 | Providing and fixing of Hardware fittings of approved make including necessary screws etc. |
| 52 | a. Tower bolts 100mm. |
| 53 | b. Hinges 100mm. |
| 54 | c. Handles 100mm |
| 55 | Providing and fixing of wall panel 50mm thick (puff panel) and width 1 mtr or more insulated thick panel with .50mm PPGI sheet both sides 40 + 2 Kg density and all carriages ofmaterial upto site complete job. |
| 56 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. Steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles including applying a priming coat of approved steel primer and two or more coats of paint required colour to give an even shade complete incl. carriages as involved. |
| 57 | Providing and fixing M.S grills ornamental of required pattern/design using flats, square or round bars , handles , bolts and L-drops etc including applying apriming coat ofsteel primer and two or more coats of paint etc, and all carriages of material as involved upto site of work complete. |
| 58 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 7333 and IS: 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i,e at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitres and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15) (Anodized powder coated aluminum) For shutters of doors, windows and ventailtors including providing and fixing of hinges / pivots complete. |
| 59 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge with float glass panes of 5.00mm thickness (weight not less than 12.50 Kg / Sqm) including all carriage of materials as involved upto site of work complete. |
| 60 | Providing and fixing fly proof galvanized M.S wire guaze to windows and clerestory windows using galvanized M.S wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.6mm including beading and applying priming coat of red oxide paint complete. |
| 61 | Providing and fixing ACP (aluminum composite panel) pre laminated sheets with decorated lamination on both sides of standard quality including all fittings and fixtures as required complete or as directed by EIC. |
| 62 | Providing and fixing of sliding door locks complete. |
| 63 | Supplying and filling RBM including spreading, watering, dressing, consolidation including cost and carriage of RBM etc compacting consolidation including all carriage of material upto site complete. |
| 64 | Providing and fixing of 12mm thick ply board of approved quality for soffit / eaves boarding including necessary fittings fixtures, and scaffolding charges as required and carriage of all materials as involved upto site of work complete. |
| 65 | Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+ 0.05%) total coated thickness with zinc coating 120 grams as per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, including cutting to size and shape wherever required and all carriage as involved upto site of work complete. |
| 66 | Taking of geo- tagged photographs of size 125mm x200mm pre- execution, during execution and post completion.(7 No’s of each) |
