Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To Iph Deptt.For C / O T / Well At Village Indpur Tanda By Prov. 11 / .4 Kv 63 Kva S / Stn. A / W 11 Kv Ht Line Section Indpur Under Esd Indora
Tender Value
5.74 Lakhs
Estimated cost
Bid Submission
30 Dec 2021
0 days left
EMD
14368
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indora → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To Iph Deptt.For C / O T / Well At Village Indpur Tanda By Prov. 11 / .4 Kv 63 Kva S / Stn. A / W 11 Kv Ht Line Section Indpur Under Esd Indora Ed Fatehpur Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To Iph Deptt.For C / O T / Well At Village Indpur Tanda By Prov. 11 / .4 Kv 63 Kva S / Stn. A / W 11 Kv Ht Line Section Indpur Under Esd Indora Ed Fatehpur
BOQ
| Sl. No. | Item Description |
| 1 | 63 KVA S/Stn |
| 2 | 11/.4 KV 63 KVA DTR (REC Sep. ord 11/1976 |
| 3 | Prov. ST PolePole 9 Mtr. Long W/L 200 Kgs |
| 4 | Muff for steel tubular pole with concrete filling |
| 5 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line |
| 6 | MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA\"s ) |
| 7 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 8 | Transformer Bed, Belting & Knee Bracing-X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for transformer bed |
| 9 | Transformer Bed, Belting & Knee Bracing-X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] |
| 10 | Transformer Bed, Belting & Knee Bracing- MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. |
| 11 | Transformer Bed, Belting & Knee Bracing-MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
| 12 | Transformer Bed, Belting & Knee Bracing-MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing |
| 13 | Transformer LT Diostribution Box and G.O switch fixing assembly-MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos |
| 14 | Transformer LT Diostribution Box and G.O switch fixing assembly-MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos |
| 15 | Transformer LT Diostribution Box and G.O switch fixing assembly- G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm |
| 16 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
| 17 | D.O Fuse unit |
| 18 | Surge Arrester, 9 kV Station Class |
| 19 | Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) |
| 20 | Stay set complete |
| 21 | Staywire (7/3.15mm)( 7 Kg per stay set) |
| 22 | Pipe earthing with GI,Charcoal & Salt |
| 23 | Prov. LT distribution panel with MCCB (100 A, 10 KA, 4P,1 No.) & SFU (32 A 5 No. rewireble) for 63KVA Trf. as per specification |
| 24 | Half clamp (M.S. Flat 50x6) |
| 25 | Full clamps (M.S. Flat 50x6) |
| 26 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 27 | Aluminium Thimbles |
| 28 | Copper Thimble |
| 29 | Danger Plate |
| 30 | Barbed wire (REC Sp F 3/1981) |
| 31 | LT Cable 3-1/2 core-120mm sq. |
| 32 | Alluminium Paint |
| 33 | Prov.ACSR, 6/1/3.35 mm |
| 34 | Prov. Transformer structure protection plinth(Civil Work As per HPSR) for 63KVA S/Stn |
| 35 | 11 kV HT Line |
| 36 | AAAC 7/3.15(55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
| 37 | Prov. Steel tubular poles. 9mtrs |
| 38 | Muff for steel tubular pole (2000mm long) with concrete filling |
| 39 | Run Through structure (Formation Tringle) single pole Str.-Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x4 structure |
| 40 | Run Through structure (Formation Tringle) single pole Str.-Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures |
| 41 | Run Through structure (Formation Tringle) single pole Str.-Pole Top Bracket [MSCI:100x50x6mm-100mm] |
| 42 | Run Through structure (Formation Tringle) single pole Str.-11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure |
| 43 | Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.] |
| 44 | Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] |
| 45 | Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]Formation Tringle |
| 46 | Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
| 47 | Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure |
| 48 | HT Stay / Guy Arrangement-Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.) |
| 49 | HT Stay / Guy Arrangement-Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) |
| 50 | Earthing HT line-HT earthing set complete (REC Constr. Standared J-1) |
| 51 | Earthing HT line-Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
| 52 | Earthing HT line-Cross lacing (G.I. 8SWG) [2.2Mx9Nos@2M spacing] {0.102kg/M |
| 53 | Earthing HT line-Eye Hook for earth wire |
| 54 | Earthing HT line-Earth Wire Clamp |
| 55 | Earthing HT line-MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing |
| 56 | Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
| 57 | Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
| 58 | Danger Plate (250X200X1.6 mm) |
| 59 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 60 | Barbed wire (REC Sp F 3/1981) |
| 61 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
| 62 | D.O Fuse unit |
| 63 | Alluminium Paint |
AI Tender Summary
Tender Timeline
Dec 20, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender