construction of community centre hall room toilets , Cdc Ka Nirman Kary Gram Panchayat Rasulpur Ke Majra Madhwapur Me Cd
Tender Value
17.54 Lakhs
Estimated cost
Bid Submission
27 Dec 2021
0 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PIHANI → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction of community centre hall room toilets , Cdc Ka Nirman Kary Gram Panchayat Rasulpur Ke Majra Madhwapur Me Cd
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in trenches for foundation and pipes, cables etc. in ordinary soil(lo an clay or sand ) i/c lift up to 1.5m and lead upto 50 m and dressing of sides and rammi ng of sides and disposal of surplus excavat ed earth as directed by the E/I witth in a lead of 50m as per S.I.No.251. |
| 2 | Providing and laying in cement concrete 8:4:1( Stone ballast 40 mm gauge nominal size) 4 fine sand : 1 cement) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors .as per Sl.N0. 281 |
| 3 | M-150 class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work as per Sl. No. 303. |
| 4 | R.C.C. work with cement, approved coarse sand and 40 mm gauge approved stone ballast in the proportion M-20 in RCC raft foundation and footing excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 287. |
| 5 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3( 1 cement : 4½ aggregate ) in R.C.C. columns excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 289. |
| 6 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 inlintels of doors and windows sunshade and R.C.C. projuction excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 289. |
| 7 | M-150 class brick work in 1:6 cement and coarse sand mortar in super - structureincluding necessary cutting and moulding of bricksas required and also honey comb brick work as per Sl. No. 303,305(b)&310. |
| 8 | Mild steel or Iron work of heavysizes and sections such as trusses,builtup gates ,door frame,roof work ,Gate etc. wrought to required i/cdrilling holes ,rivetting or welding etc.supply of steel and its westage i/c cost of bolts, nutsas required for proper completion of the work.as per S.I.No503 |
| 9 | As in item No.8 above but for gril (febricated)iron grill as per S.I.No. 503 |
| 10 | Febrication of Z- section steel windows, i/c necessary steel fitting such as handles etc. as per S.I.No. 503 |
| 11 | Fixing of door,windows and ventilator frames in position in buildingincluding proper adjustment required for proper completion of the work. As pr NBO-11.14 (A)Door chaukhat, (B)Window chaukhat, © Ventilator chaukhat |
| 12 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 in Beam excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per S.I. 289 |
| 13 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 in Slab excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc.as per S.I.No.289 |
| 14 | Supply and fixing of hexagonal fan box with approximate 80 mm in length febricated from 16 SWG M.S. sheet in corporating 10 mm dia M.S. round bar dulybent forsupporting fan hanger duly painted with red oxide and screwing arrangement with writing conduit laid on the RCC roofbefore concreting along with supply of all materials, labour and T & P etc.as per SI No. 1149. |
| 15 | Provision for sppply and fixing of 25mm dia CPVC Pipe as per Electrical Purpose as per Sor Ch-21 item No-101 |
| 16 | Mild steel or Iron in Plain such as R.C.C. and R.B. work (when not included in an over all rates ) wrought to required shape as necessary i/c bending for proper completion of the work and i/c supply of steel its wastage bend hooks authorised over lapping shall be measured upto floor two level. as per SI No. 504 |
| 17 | Cost Cement Concrete door sills ,chaukhats boundary post shelves work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:2:4 in bed plates excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 282. |
| 18 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 Sr. No. 12.3 MORD 600 |
| 19 | 12 mm thickplaster with cement and fine sand of 1.25 FM mortar over smooth surface in 1:6including supply of all materials, labour and T&P etc.required for proper completion of the work as per SI No. 586. |
| 20 | 12 mm thickplaster with cement and fine sand of 1.25 FM mortar over rough surface in 1:6including supply of all materials, labour and T&P etc.required for proper completion of the work as per SI NO-586 |
| 21 | 25mm thick cement concrete flooring 1:2:4 ( 1cement 2 coarse sand & 4 graded stone aggregate of size 12.5 mm& below ) laid over base concrete & finished with floting coat of neat cement (base concrete to paid seperately i/e fixing of glass strips ) as per S.I.601 |
| 22 | Provision for supply and fixing of 25 mm wideand 3mm thick glass strips |
| 23 | 40 mm thick cement concrete flooring 1:2:4 ( 1cement 2 coarse sand & 4 graded stone aggregate of size 12.5 mm& below ) laid over base concrete & finished with floting coat of neat cement (base concrete to paid seperately i/e fixing of glass strips ) as per S.I.601 |
| 24 | Earth work in cutting or filling inembankment in ordinary soil earth work in exca vation to be done inregularpitsnotexceeding 1/2 mt depth and earth work in filling to be in 20cm layers including ramming,dressing the surface to required slopes and alsoincluding 1.50mtliftand 30mtlead. The earth from cutting to be used in making embankment or to be depo sited as spoil bank as per direction of E/I and S.I. NO.253 i/c 5.0km cartage |
| 25 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windowsall complete with4mm thick glass panes.as per DSR No. 10.30.1 |
| 26 | White washing three coat with white lime or undecorated wall surface in three coat to give even shade i/c throughly brooming the surface to remove all dirt ,dust mortar dropsand other foreign matter as per S.I.No.673 |
| 27 | Providing and applying white cement based putty of average thickness 1 mmof approved brand and manufacturer, over the plasterdwall surface even and smooth surfaceas per DSR - 13.80. |
| 28 | One priming coat and two coat of oil bound distemper on new work including the supply of all materials, labour and T&P etc. required for proper completion of the work as per SI No. 649 & 650. |
| 29 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR - 13.47.1 |
| 30 | Painting or Varnishing new iron work in small areas of new wood work with two coat of ready mixed priming paint and one coat of approved superior quality ready mixed enemal paint of varnish including sand papering , rubbing and cleaning the surfaceand s/o all materials, labour and T&P etc. as per Sl.No. 641 & 642. |
| 31 | Supply and fixing of laying inaugration stone black granite polished size of 600x900x20mm with including letters painting , groovings of letters and filling of letters with Golden varnish and cartage in all respects at site etc.completion in all respectes .sanctioned bySE Red Lko |
| 32 | E/W in excavation in trenches for foundation and pipes, cables etc. in ordinary soil ( loan clay or sand ) i/c lift up to 1.5m and lead upto 50m and dressing of sides and ramming of sides and disposal of surplus excavated earth as directed by the E/I witthin a lead of 50m as per S.I. No. 251. |
| 33 | Providing and laying in cement concrete 8:4:1( Stone ballast 40 mm gauge nominal size) 4 fine sand : 1 cement) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors .as per Sl.N0. 281 |
| 34 | M-150 class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work as per Sl. No. 303. |
| 35 | M-150 class brick work in 1:6 cement and coarse sand mortar in super - structureincluding necessary cutting and moulding of bricksas required and also honey comb brick work as per Sl. No. 303,305(b)&310. |
| 36 | M-150 class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work as per Sl. No. 305(b). |
| 37 | Providing and laying in cement concrete 4:2:1 of not less than strength of M-150 stone ballast (20mm nominal size) 2 approved coarse sand:1 cement and curring complete including cost of form work in foundation and floors as per SI No. 279(b). |
| 38 | Mild steel or Iron work of heavysizes and sections such as trusses,builtup gates ,door frame,roof work ,Gate etc. wrought to required i/cdrilling holes ,rivetting or welding etc.supply of steel and its westage i/c cost of bolts, nutsas required for proper completion of the work.as per S.I.No503 |
| 39 | Fixing of door,windows and ventilator frames in position in buildingincluding proper adjustment required for proper completion of the work. As pr NBO-11.14 |
| 40 | S/F of brick bats in filter media 40mmAS Per SOR(17-18) Ch-1 material |
| 41 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 inlintels of doors and windows sunshade and R.C.C. projuction excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc. as per Sl.No. 289. |
| 42 | R.C.C. work with cement, approved coarse sand and 20 mm gauge approved stone ballast in the proportion M-20 in Slab excluding the supply of reinforcement and its bending but including its binding , supply of all other materials , labour and T & P etc.as per S.I.No.289 |
| 43 | Mild steel or Iron in Plain such as R.C.C. and R.B. work (when not included in an over all rates ) wrought to required shape as necessary i/c bending for proper completion of the work and i/c supply of steel its wastage bend hooks authorised over lapping shall be measured upto floor two level. as per SI No. 504 |
| 44 | 12mm. Cement plaster in 1:4 with cement and coarse sand mortar in single coat on fair side of single or half brick wall for interior plastering up to floor two level i/c internal rounded angles champhers and or rounded angles not exceeding 80 mm in grith and finished even and smooth no extra for mixing any additive.Asper SI NO-(583-582)+584 |
| 45 | 12m.m. thick plaster with 1:6 Cement & f-sand of 1.25 fineness modules mortar not to be less than 1 cm. including supply of materials, labour, T&P etc complete. S.I. No. 586 |
| 46 | 25mm thick cement concrete flooring 1:2:4 ( 1cement 2 coarse sand & 4 graded stone aggregate of size 12.5 mm& below ) laid over base concrete & finished with floting coat of neat cement (base concrete to paid seperately i/e fixing of glass strips ) as per S.I.601 |
| 47 | Provision for supply and fixing of 25 mm wideand 3mm thick glass strips |
| 48 | Providing and laying vitrified floor tiles insizes of the 300mm x 300mm or more with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting thejoints with white cement and matching pigments etc., complete. as per DSR- 11.41.20 |
| 49 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As per DSR -11.39 |
| 50 | White washing three coat with white lime or undecorated wall surface in three coat to give even shade i/c throughly brooming the surface to remove all dirt ,dust mortar dropsand other foreign matter as per S.I.No.673 |
| 51 | Providing and applying white cement based putty of average thickness 1 mmof approved brand and manufacturer, over the plasterdwall surface even and smooth surfaceas per DSR - 13.80. |
| 52 | One priming coat and two coat of oil bound distemper on new work including the supply of all materials, labour and T&P etc. required for proper completion of the work as per SI No. 649 & 650. |
| 53 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR - 13.47.1 |
| 54 | Painting two coat over one coat of priming coat with superior synthetic enamel such as luxol,dulux,specified brushing to give aneven shade and i/c cleaning the surface of all dirt and other foreign matter sand papering & st oping i/c cost of all material,labour and t&p etc.required for proper completion of the work |
| 55 | Providing and fixing water closet squatting pan (Indian type W.C. pan) of size 580 x 440 mmwith 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete,including cutting andmaking good the walls and floors wherever required: as perDSR 17.1.1 |
| 56 | P/L of 100 mm dia S.W. pipe 600mmlong. |
| 57 | Providing and fixing of 75 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989, soil,waste and vent pipes: DSR- 17.35.2.2 |
| 58 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereverrequire:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps as per DSR 17.7.4 |
| 59 | Providing and fixing of 40 mm dia Semi Rigid PVCwaste pipefor sink or wash basin including PVC. waste fittings complete. As per DSR-17.28.1.2 |
| 60 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR-17.31 |
| 61 | Providing and fixing M.S. holder-bat clamps 100 mm dia of approved design to Sand Cast Iron / Cast Iron (spun) pipeembedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : DSR-17.37.1 |
| 62 | Providing and fixing 100 mm dia bend of required degree with access door, insertion rubber washer 3 mm thick,bolts and nuts complete : DSR-17.38.1.1 |
| 63 | Providing and fixing 75 mm dia bend of required degree with access door, insertion rubber washer 3 mm thick,bolts and nuts complete : DSR-17.38.2.1 |
| 64 | Providing and fixing 100 mm dia terminal guard : DSR-17.56.1.1 |
| 65 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 100mm as per DSR 17.58.1 |
| 66 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 75 mm as per DSR 17.58.2 |
| 67 | Providing and fixing 600 x 20 mm C.P. brass towel rain complete with brackets fixed to wooden cleats with CP brass screws as per DSR 17.73.2 |
| 68 | Providing and fixing of 15 mm dia nominal bore G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. exposed on wall.as per DSR - 18.10.1 |
| 69 | Providing and fixing of 25 mm dia nominal bore G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. exposed on wall.as per DSR - 18.10.3 |
| 70 | Providing and fixing of 15 mm dia nominal bore G.I. pipes complete with G.I. fittings & clamps includingtrenching & Refilling etc.as per DSR - 18.12.1 |
| 71 | Providing & placing on terrace (at all floor levels) polythene wter storage tank of approved brand and manufature with oer & suitable loking arrangement & making neessary holes for inlet outlet & over flow pipes but without fittings and base support for tank etc. as per DSR-18.48 |
| 72 | Providing and fixing of CP brass 15mm dia nominal bore brass bib cock of approved quality conforming to IS:8931. |
| 73 | Providing and fixing of 15 mm dia nominal bore brass stop cock of approved quality as per DSR 18.16.1 |
| 74 | Providing and fixing of 15 mm dia 450 MM long unplasticised PVC connection pipe with brass union as per DSR 18.21.2.1 |
| 75 | Providing and fixing of C.P. brass angle valve for basin mixer & geyser points of approved quality with 15 or 20 mm nominal bore as per DSR 18.53 |
| 76 | Providing and fixing of C.P. brass PILLARS COCK of approved quality with 15 or 20 mm nominal bore as per DSR 18.56.1 |
| 77 | P/F125mm niminal dia Cirular type with 25mm waste grating of approved quality& colour as per DSR |
| 78 | Providind & laying cement concrete 1:5:10(1cement:5 coarse sand:10 40mm brick aggregate all round 100mm dia S.W.pipes including bed concreteas per standard design as per DSR 19.2.1 |
| 79 | Wiring point for light with 1.5 sq. mm. FR PVCinsulated multistrand copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continity wire, piano type switch & ceiling rose /angle /batten holder on 3 mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colourwahas per Sl. No. 131 ( c ) |
| 80 | Wiring point for fan/ fresh air fan (light duty exhaust fan)with 1.5 sq. mm. FR PVCinsulated multistrand copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continity wire, piano type switch & ceiling rose /angle /batten holder on 3 mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colourwahas per Sl. No. 133 ( c ) |
| 81 | Wiring point for plug with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire piano type switch and socket etc. complete in all respects including matching colour wash etc. . as per Sl.No. 134 ( c ) |
| 82 | Supply and fixing ofbatten/ angle /holder complete in all respect as per SI No-.405. |
| 83 | Supply and fixing of 240V volts\" L\"series miniature circuit breaker 6Amp. To 32 Amp (10KA) in existing MCB. DB complete with connections as required as per Sl.No. 1002. CAT A |
| 84 | Supply and fixing of40 Amp. D.P. Isolator Cat A as per SI No. 1005(A) |
| 85 | Supply and fixing of8 ways SPN distribution board without MCB complete in all respect as directed at site by Engineer in charge as per SI No- 1024 CAT A |
| 86 | Supply and fixing of power plug with 15 A / 250 V flush type switchand 3 pin 15 A / 250V flush type socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size switch backlite sheet cover3 mm thick fixed with brass machine screws and cup washer as per Sl.No. 1139 |
| 87 | Supply and wiring of submain with 2 numbers 2.50 sq. mm. FR PVC insulated 1100 V multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 1.50 sq.mm FR PVC insulated 1100 V grade multistrand single core copper copper conductoras earth continuity wire as per SI.No. 1304(c) |
| 88 | Supply and erection of AC 1200 mm sweep ,230/250 Volts , 50 Hz ceiling fan with regulatorstandard down rod , blades including connection etc. complete as requred. |
| 89 | Erection and testing of ceiling fan and regulator for room height upto 3.50 mtr including supply of 3 mm thick G.I. down rod 19 mm dia duly painted complete in all respect as per Sl.No. 1116 |
| 90 | ?????? ?????? -II ????? ???? ???????? ??? | |
AI Tender Summary
Tender Timeline
Dec 20, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender