|
| 1 | Item No.1: Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means ) Additional Spec No.BR.3 Page Number 102 (SSR 2021-22 It.No. 12.03) |
| 2 | Item No.2:- Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. Additional Spec. No.CD.14 Page.No. 167 (SSR 2021-22 It.No. 11.24 ) |
| 3 | Item No.3:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No. As directed by Engineer in charge.(SSR 2021-22 It.No.21.40) |
| 4 | Item No.4:-Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. Additional spec. No.CD.7 Page.No. 162 (SSR 2021-22 It.No.11.11 ) |
| 5 | Item No.5:-Providing and laying in situ cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete.(with reversible drum type mixewith SCADA ) Crushed Sand (SSR 2021-22 It.No. 11.03) |
| 6 | Item No.6:-Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA Additional Spec. No. CD 8 Page 163 (SSR 2021-22 It.No. 11.29) |
| 7 | Item No.7:-Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) Additional Spec No.BR.47(a) Page Number 140 and B. 7, Page Number38 (SSR 2021-22 It.No. 14.39) |
| 8 | Item No.8:-Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mm x 35 mm x 3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 2021-22 It.No. 6.36) |
| 9 | Item No.9: Charges for testing of material in vigilance and quality control laboratory etc. complete For 40mm. Metal, aggrigate, Murum Sieve Analysis |
| 10 | Item No.10: Charges for testing of material in vigilance and quality control laboratory etc. complete CONCRETE M-10/ M-20Compressive Strength of C.C. Cube (Set of 3 cubes) |
| 11 | Item No.11: Charges for Royalty of Material Metal & Murum etc. complete. |
