Upgradation Of Sub Centre Into Su Swathyakendra ( Hwcs ) At Gairibas Under Gorubathan Block, Dist Kalimpong
Tender Value
10.76 Lakhs
Estimated cost
Bid Submission
07 Jan 2022
0 days left
EMD
21526
Bank guarantee accepted
Document Fee
1005
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GORUBATHAN → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Sub Centre Into Su Swathyakendra ( Hwcs ) At Gairibas Under Gorubathan Block, Dist Kalimpong
BOQ
| Sl. No. | Item Description |
| 1 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 2 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes . (b) river bazree Upto 4th Floor |
| 3 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rodsinitial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersectionas per drawing and direction. Extra for works beyond the roof of groound floor/ initial 4m Tor steel/Mild Steel Other than SAIL/ TATA/RINL |
| 4 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 5 | Cement concrete with 30mm down graded shingles excluding shuttering 1:3:6 proportion |
| 6 | 125mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor |
| 7 | Plaster (to wall,floor ,ceiling etc. with sand and cement mortar, including rounding off corners or chamfering corners as directed and taking out joints or roughening of concrete surface. with (1:4) cement morter 15 mm Thk. Plaster External plaster - upto 4th floor |
| 8 | Internal plaster - upto 4th floor |
| 9 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to make the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges andother fittings upto 4th floor 35mm thick shutters (single leaf) |
| 10 | Supplying, fitting and fixing M.S. clamps for fitting doors & windows framesmade offlat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction.40mm x 6mm, 250mm long |
| 11 | Oxidised Iron butt hingesof approved quality fitted and fixed with steelscrews with ISI mark. ix)100 mm x 75 mm x 3.50 mm thk |
| 12 | Anodized al D type handle of approved quality manufactured from extruded section confirming to IS specification (IS 230/72) fitted and fixed complete.With continous plate base hexagonal/ round rod. vii) 150mm grip x 12 mm dia rod |
| 13 | Anodised aluminium skeleton bolt of approved quality manufactured from extruded section confirming to IS specification (IS 204/74) fitted and fixed with cadmium plated screws: |
| 14 | Supplying \"Godrej\" Mortice lock chromium plated with keys 6 levers, including fitting and fixing complete. |
| 15 | Godrej Hydraulic door closer fitted and fixed complete.Heavy type |
| 16 | Door stopper.(Brass) |
| 17 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.Flash butt welded windows and ventilators Without Integrated Grills Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. |
| 18 | M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. |
| 19 | Two point nose steel handle including fitting and fixing. |
| 20 | Steel peg stay 300 mm long including fitting and fixing. |
| 21 | Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall) 4mm thk |
| 22 | Supplying and laying true to line and level vitrified tiles of approved brand(size not less than 600mmx600mmx10mm thk) in floor, skirting etc. set in 20mm sand cement mortar(1:4) and 2mm thk cement slurry back side of tiles using cement @ 2.91kg/m2 or using polymerised adhesive(6mm thk layer applied directly over finished artificial stone floor/mosiac etc without any backing course) laid after application slurry using 1.75kg of cement per m2 below mortar only, joints grouted with admixture of white cemet and colouring pigment to match with colour of tiles/epoxy groutmaterials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete true to materials, labour and all other incidential charges complete true to manufacturer\"s specification and direction of Engineer-In-Charge.(White cement, synthetic adhesive and grout materials to be supplied by the contractor)With application slurry @1.75kg/m2, 20mm sand cement morter(1:4) & 2mm thick slurry at back side of tiles, 0.2kg/m2 white cement for joint filling with pigment |
| 23 | Supplying, fitting & fixing 1st quality Ceramic tiles in wall and floors to match with the existing work and 4 nos. of key stones ( 10 mm ) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floorwith sand cement mortar (4:1) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement 2.91 kg./M2 & joint filling using white cement slurry @ 0.20 kg./M2(a) Area of each tile upto 0.09 M2 (ii) Other than Coloured decorative including white |
| 24 | (B) Wall with sand cement mortar (4:1) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement 2.91 kg./M2 & joint filling using white cement slurry @ 0.20 kg./M2 |
| 25 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 26 | Priming one coat to timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc |
| 27 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. |
| 28 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) |
| 29 | Upto 4th Floor |
| 30 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 31 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on surface if necessary. On steel or other metal surface . |
| 32 | on timber or plastered surface: with super gloss (hi-gloss)Two coats (with any shade except white) |
| 33 | Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, Valamoid/ Bitumen/M-Seal etc) complete.UPVC Pipes:110mm Dia |
| 34 | UPVC Fittings 110mm Dia Bend 87.5 degree : (ii) 110mm Dia |
| 35 | Shoe : (ii) 110mm Dia |
| 36 | Supplying, fitting and fixing CPVC (ChlorinatedPolyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work |
| 37 | Supplying fitting and fixingwhite Vitreous china best quality approved make wash basin with CIbrackets on 75mmx75mm wooden blocks CP waste fittings of 32mm dia ,one approved quality brass P pillar cock of 15 mm dia CP chain with rubber plug with of 30 mm dia , approved quality PVC waste pipe with CP nut 32 mm dia , 900 mm long approved quality PVC conection pipewithHeavy brass CP nut including mending good damages and painting the brackets with two coats of approvedpaint |
| 38 | Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With \"P\" Trap |
| 39 | Closet seat of approved make with lid and CP hinges , rubber buffer and brass screws supplied fitted and fixed complete.EPWCiv) Bestolite (solid type ) white |
| 40 | Supplying fitting and fixing 10 ltrs PVC low down cistern conforming to IS specification with PVC fittings complete,CI brackets including two coats of painting to bracket etc. |
| 41 | Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 42 | Chromium plated angular Stop Cock with wall flange (Equivalentto Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 43 | Supplying, fitting fixing approved brand PVC connector white flexible, with both ends coupling with heavy brass CP nut, 15mm dia. |
| 44 | Supplying fitting & fixing 32 mm. dia. flush pipe of approved make with necessary fixing materials & clam complete. |
| 45 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Single Socketed 3 Meter Length 110 mm |
| 46 | Door Bend (LH) & (RH) 110 mm |
| 47 | Coupler |
| 48 | door Y (LH) & (RH) |
| 49 | Pipe Clip |
| 50 | Vent Cowl |
| 51 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on c |
| 52 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chipsover a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoilsafter work complete in all respect with all costs of labour and materials. |
| 53 | Supplying PVC water storage tank of approved quality with closed top with lid (Black) - Multilayer 1000 litres capacity |
| 54 | supplying ,fitting and fixing peets valve fullway gunmetal standard pattern best quality of approved brand bearing isi markings with fittings (tested to 21 kg per sq.cm)15mm dia |
AI Tender Summary
Tender Timeline
Dec 18, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender