|
| 1 | Item No.1:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Additional Spec. No.Bd.A.1 Page Number 259 (SSR 21-22 It.No. 21.02) |
| 2 | Item No.2:- Excavation for foundation in hard murum including removing the excavated material upto distance of50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundationandnecessary backfilling,ramming, watering including shoring andstrutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Additional Spec. No.Bd.A.2 Page Number 259 (SSR 21-22 It.No.21.06 ) |
| 3 | Item No.3:-Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering willnotbeallowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.E.4 Page Number 289 and B- 7, Page Number38 (SSR 21-22 It.No.24.10 ) |
| 4 | Item No.4:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steelcentering,formwork,coverblocks,laying/pumping, compactionand roughening the surface if special finishistobe providedandcuring etc. complete.(Excludingreinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.6 Page Number 300 and B.7, Page Number38 (SSR 21-22 It.No.25.50) |
| 5 | Item No.5:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Additional Spec.No.Bd.F.17, Page Number 306 (SSR 21-22 It.No.26.33) |
| 6 | Item No.6:-Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete. Additional Spec. No.Bd.C.2 Page Number 275 (SSR 21-22 It.No.23.01) |
| 7 | Item No.7:-Providing andfixingcorrugatedgalvanisedironsheetsof0.63mmthick(24B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). Additional Spec. No.Bd.R.5, Page Number 453 (SSR 21-22 It.No.38.04 ) |
| 8 | Item No.8:-Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete. (Weight of 6.8 Kilogram/sq.m.). Additional Spec. No.Bd.R.5, Page Number 453 (SSR 21-22 It.No.38.05 ) |
| 9 | Item No.9:-Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 21-22 It.No.46.39 ) |
| 10 | Item No.10:-Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paintofapprovedcolourandshadeetc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.Number: As directed by Engineer- in-charge. Additional Spec. No.Spec. Number As directed byEngineer in Charge. (SSR 21-22 It.No.23.09) |
| 11 | Item No.11:-Laboratory testing charges for various material on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle for the current year For Specific tests like span load tests, plate/ pile load test etc. which are not included in the rate of item, the rates for these tests will be prepared on the basis of rates approved by M.E.R.I./any competent institute of Govt. of Maharashtra or Govt. of India.CONCRETECompressive Strength of C.C. Cube (Set of 3 cubes) |
