|
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation works.(CSI 4.01) |
| 2 | Concrete with 4 cm gauge 1st class brick ballast coarse sand (FM 1.8 to2.5) and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour and T&P etc. complete.( CSI no. 5.01) |
| 3 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials,labour,side shuttering if required and T&P etc. required for proper completion of work.(CSI 5.06) |
| 4 | First class brick work in 1:4 cement and coarse sand (FM 1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI no. 6.03) |
| 5 | Indian Sal Wood wrought framed and fixed including simple ,mouldings straight work as in Chaukhats including supply of all materials, labour and T&P etc.required for proper completion of the work.(CSI No- 8.03) |
| 6 | Supply and fixing of 3.2 cm. thick Indian Sal Wood part panelled and part glazed door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply but including painting with two coats of black Japan on all Iron fittings if necessary and including fixing the glass panes with putty and necessary screws (Glass panes to be 4mm thick).(CSI No 8.34) |
| 7 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply ofcountry wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. (CSI No. 8.45) |
| 8 | Supply and fixing 32 mm thick of single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to I.S.2202 part-1 ( 1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black Japan paints of all iron fittings, if necessary.(CSI No. 8.57) |
| 9 | Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower rail, 1 no stopper and 1 no 12 mm belan including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.61) |
| 10 | Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63) |
| 11 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) |
| 12 | 6 mm. thick plaster with 1:3 cement and coarse sand including labour, materials and T&P etc. required for proper completion of the work.(CSI No 11.17) |
| 13 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 14 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) |
| 15 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint \"Luxol\" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI 13.01) |
| 16 | As in item 15 above but for every coat after first coat.(CSI 13.02) |
| 17 | Painting or varnishing one coat on previously painted old wood or iron work including its sand papering,rubbing and cleaning as required, for proper completion of work(CSI 13.03) |
| 18 | Oil bound distemper one coat (Berger or equivalent) on old previously distempered surface including supply of material, labour and T&P required for proper completion of work. (CSI No-13.10) |
| 19 | As in 18 above but for every coat after first coat or subsequent coat.(CSI No-13.09) |
| 20 | White washing two coat including supply of all materials,labour and T&P etc. required for proper completion of the work.(CSI NO.-14.02) |
| 21 | Dismantling doors or window leaves including stacking of materials as directed by the Engineer I/Cwithin a dist. 60 M.(CSI No. 15 09) |
| 22 | Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) |
| 23 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 24 | Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8\") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 11.09+20.02) |
| 25 | Repair to 2.5 cm (1\") cement concrete floor in patches including up to 10 cm.(4\") depth renewing 8 cm.(3\") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5\") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work. Add to item(601) in chapter-13 for flooring.(CSI 12.01+20.03) |
| 26 | Renewing panes of glass 4 mm thick including supply of glass with putty and brads including supply of all materials, labour and T & P etc. required for proper completion of the work.(CSI N0 20.04b) |
| 27 | Easing door and windows.(CSI No 20.05) |
| 28 | Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12) |
| 29 | Same as in item No.28 above but for inspection chamber. (CSI 20.13) |
| 30 | Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the board\"s area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.14) |
| 31 | Same as above in item No. 30 but for drain of width less than 300 mm.(CSI 20.15) |
| 32 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).(CSI no 20.16) |
| 33 | Supply and replacing of Tower bolts 10 mm dia x 250 mm longchromium polished iron fittings including cost of nuts, bolts etc.complete. (CSI No. 20.17B) |
| 34 | As in 33 above but for Tower bolts 10 mm dia x 100 mm long.(CSI No-20.17C) |
| 35 | As in 33 above but for M.S.handles 100 mm size .(CSI No-20.17F) |
| 36 | Cleaning and opening of chocked W.C./ bath / kitchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.(CSI No 20.19) |
| 37 | Providing and fixing 15 mm dia B-class Jindal, JTC, ISI or approved make G.I. pipes complete with with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.(CSI 26.02) |
| 38 | Making water connection of GI pipe line with GI Mains ( 25 mm to 40 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing,cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work.(CSI 26.03) |
| 39 | Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a) |
| 40 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work.(CSI 26.12 ) |
| 41 | Supply and fixing of 15 mm dia CI/ PVC bib cock including replacing of old bibcock complete.(CSI 26.13 c) |
| 42 | P/F BRASS BIB COCK, 15 mm dia (200 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13b) |
| 43 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) |
| 44 | Providing and fixing first quality white glazed \"Orissa\" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out \"P\" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) |
| 45 | Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.04) |
| 46 | Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21a) |
| 47 | Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) |
| 48 | Applying two coat Tapcrete mixed with White Cement and water to proper consistany on leaky surface including supply of allmaterials, labour etc. required for proper completion of work. (CSI No. 28.16) |
