|
| 1 | ARTISTIC WORK |
| 2 | Artistic Direction, LightingDirection, Audioexpert, Research, Script, translation, dramatization etc. (20 to 25 Minutes show) |
| 3 | Voiceover/Recording ofshowin twolanguagesincludingartists,musicians, voioeover, music effects, etc. |
| 4 | Visualizingthecontent, creating2D/3D animation, CGI, laseranimation, Video shoot for the show etc. |
| 5 | Programming! integration of show \"hith content, effect etc. inclu ding cost of cueing, programming DMX based intelligent Luminaries and system integration etc. |
| 6 | HARDWARE WORK |
| 7 | Supply,installation, testing and commissioning of Audio/Dimmer Rack - 19 \" - 36 U Rack, 600 mm wide, height approx 1800 mm with Aluminum frame and 800 nun depth, top bottom sidepanel and rear door of CRCA. Sheet size l mm, front door with Aluminum section and acrylic/glass sheets,Make :Netrack I APW I President I MTS |
| 8 | Supply,Installation, testing and commissioning of Hom Loaded three way full range cabinet with a continuous power handling of 600 watt in a compact, three-way BIAMPED design . . Itshould have 2Xl 2\" (300mru) low-frequency driver with min3\" vc,a 8\" MF using a min 50 mm voicecoil and a 1\" exit compression driverhaving a min 44 mm voice coil mounted on a constant directivity 40° x60° horn. At 8 Ohm it should have a min l w/ lm @8 ohm sensitivity of 103/ 109dB,with a continuous/Peak SPL of 130/ 136 dB. Frequency response to be better than 75hz --- 20 kHz. The cabinet must have all hardware to enable it to be mounted on a flying frame. Must be constructed from a min of 15/24 nun Baltic multi-laminate Birch ensuring no cabinet resonances. it should be covered in a highly weather resistant tex1urepaint and protected by a sturdy 16 gauge steel grille, Dispersion :40° x 40°, The hardware should be 16 SWG anti kick steel Grill, Construction birch ply.Make :CSC/Heinrich/Harman/Bose |
| 9 | Supply,Installation, testing and commissioning of Flying frame of above items with all hardware , Make :CSC/Heinrich/Harman/Bose |
| 10 | Supply, Installation, testing and commissioning of Sub Woofer having a minimum continuous power handling of 2000 watt using a 2x18\"(4501l1tll) LF Driver with a double suspension 4\" voice coil. At 4 Ohm it must have a min sensitivity of 103dB, it has a continuous!Peak SPL of 135/ 141 dB. frequency response must be better than 37hz ----300 Hz (at plus minus 3 dB). Must be constructed in min 15/241ll1ll Baltic multi-laminate Birch and protected in a highly weather resistant texture paint. The drivers must be protected using a sturdy 16 gauge steel grille. It must have anti-Skid Rubber Feet,Subwoofer Frequency Response 32 Hz - 250 Hz. (± 3dB) Sensitivity (SPL l W/ l m) min 104 dB,PowerHandling:> 2000W (continuous)4000 W (program) The hardware should be 16 SWG anti kick steel Grill, Cabinets constructed only constructed from birch ply. Anti skid feet. Connector and link speak on NL 8.Make : CSC/Heinrich/Harman/Bose |
| 11 | Supply, Installation, testing and commissioning of Studio Monitor speakers withhigh power and low distortion41W + 41W Two Class-D True Active low d istortion amplifiers , Frequency Response :50 Hz to 20 kHz ; Input sensitivity :-10 dBu ; Max SPL @ IM : 92dB ; Coverage angle 90 degree vertical, 120 degree horizontal ; Tota l Power :200W Peak, 1OOW RMS .Make CSC/Heinrich/Harman/Bose |
| 12 | Supply,Installation, testing and commissioning of High current Linear power supplypower amplifier in Class D Topography having a power rating of 2x 1800/2400 @ 4/2 ohms with a THD of less than .0I% ,slew rate of 25V/uS and a damping factor > l 000 having a high pass filter, thermal, short circuit and under/over voltage protection. Stable into mismatched loads, indicators on the front panel indicate Signal/ limit and power/ fault. Stereo and parallel switch in 2U, . It should be capable of with standing voltages up to 440 v without failing, power Supply AmplifierOutput Power: 20hz--- 20 kHz, Frequency Response: 20hz - 20khz, THD: <0.01%, Protection: Softstart, poweron muting, short circuit, thermal,DC voltage, Input connectors:4 x NeotericXLR, Output connectors:2x NeotericSpeak on, Cooling system: Fan Power Supply: Universal, 240 volts ACMake : CSC/Heinrich/Harman/Bose |
| 13 | Supply, Installation, testing and commissioningof High current Linear powersupply power amplifier in Class D Topography having a power rating of 2x1200/2400 @ 4/2 ohms with a THD of less than .OJ % ,slew rate of 25V/uS anda damping factor > l 000 having a high pass filter, thermal, short circuit and under/over voltage protection.Stable into mismatchedloads,Input and link using XLR connectors ,Output speak on ,indicators on the front panel indicate Signal/ limit and power/fault. Stereo and parallel switch in 2U, . It should be capable of with standing voltages up to 440 v without failing power Supply Amplifier, Output Power: 20hz--- 20 kHz4/2 ohms: 2 x 1200/2400 watts,Frequency Response: 20hz - 20khz Protection:Soft start, poweron muting, short circuit, thermal, DC voltage Inputconnectors: 4 x NeotericXLR,Output connectors: 2x NeotericSpeak on, Cooling system: Fan, Power Supply: Universal, 240 volts ACMake : CSC/Heinrich/Harman/Bose |
| 14 | Supply,Installation, testing and commissioning of Sound Management Controller Type :Digital controller with 2 in x 6 out, Features :Each input/ output should be configurable individually having a cross over, limiter, parametric eq and a delay, It shou ld also have an ind ividual ga in control of all outputs, Input in1pedance : IOk ohm electronically balancedMaximum input level:+ 20 dbu or better,Input gain :+I - 15db variable in 0.1 db steps or better, Input/output connector : XLR 20dbu into 600 ohm or greater, Output gain :+/- l5db, variable in 0.1db steps or better, Cross over filters : slopes 6, 12, 18, 24, or 48db , with high shelf and low shelving, Crossover filter type :Bessel, Butterworth or linkwitz - riley,Delay Steps :better than 15 microseconds minimum, Max number of EQ filters :9 per output EQ gain :+/- 15db,variable in 0.2 steps,Eq type: Parametric, Bell or shelving on any filter, nine filter assigned with different slopes, To dynamic EQ Bandwidth :0.05 to 3 octave, variable in 0.05 steps EQ frequency : 15 Hz to 20 KHz Frequency response : l5hz-20khz, +/- 0.25kb I 15hz- 40khz, +/- 3db Distortion :< 0.005 5, 20hz-20kz @ +10db output, Main Power : 11OV -240 V AC, 50/60HZ, 30VALinkMake :CSC/Heinrich/Harman/Bose |
| 15 | Audio Interface Hybrid FireWire and USB Audio Interface with software license. Eight 24-bit analog quarter-inch (TRS) inputs and Eight 24-bit analog quarter-inch (TRS) outputs, Operates on all analog I/O at standard sample rates up to 192 kHz, MIDI 110,Auto-switching international power supply.Make :Focusrite I Steinberg I Motil |
| 16 | Supply,installation, testing and commissioning of 6 Watt Laser, Quality graphics capable - 45 kpps@ 8° ILDA scanners -upgradable to 60kpps, Power Red 2\"000 mW I 637 nm,Power Green l\"600 mW I 520 run,Power Blue: 3\"000 mW I 450 nm, Extremely sharp intense beams· low divergence of |
| 17 | Projection housing enclosure with DEC Control Interface for setup and monitoring of temperature, humidity and status indicators. Power control circuit with PID Management system compatible with the projection housing unit and display unit. (Make :Customised) |
| 18 | Control panel with Independent Digital Led Display for Monitoring of Temperature and Humidity , exhaust control circuit, heating circuit, and power distribution for the projectors.(Make :customised) |
| 19 | Laser protection housing 20 - 30 °C with an accuracy of 0.3°C inside, independent from the ambient temperature in a temperature range of +5°C up to 40°C |
| 20 | Supply,installation, testing and Commissioning of Moving head/gobo light; Input Voltage: AC 100-240V C 50/60 HZ; Power: 620 Watt, Lamp: 20R 440Watt; Life:2000 hrs; DMX channels:24ch; CMY colour mixing with gradually fading colour wheels: 15 colour + white Cl\1£Y colour mixing system; PAN:540° (16 bit); Tilt: 270° ( 16 bit); Gobo wheel : 18 Fix Gobos + 7 Rotational Gobos; Effect wheel: 8 facet rotating prism + frost + shake; Strobe: O-l 3fls random or pulse flash, speed adjustable strobe macro function ; Din11ller: 0-100% linear lighting dimming; BlS, LM 79 and LM 80 approved; Ingress Protection type: IP20: Make: Modern Stage Service / PR Lighting / Studio Duo |
| 21 | Supply,installation, testing and commissioning of DMX 512 controlled Waterproof Clear Vision Dome enclosures for Moving head/Oobo Light with adjustable locking bracket,power supply to lights automatically tum off and Fan etc. |
| 22 | Supply,installation, testing and Commissioning of Color Changing Surface-mounted Individual addressable Linear luminaire suitable for facade Lighting. Lurninaire luminous flux range 1350-1600 Lm, Luminare wattage should be 45W. Luminaire should Controlled through Bluetooth I Wi fi I OMX/Ethernet protocol using Data formatting device and Controller, Controller can achieve 16.7M colors. Rated input supply at DC 24V constant voltage with external power supply and external decoder. Light colour RGBW (W:5500-6000K LED Make :CREE I LUMINOUS I OSRAM ISEOUL / SAMSUNG. The luminaire should have optics : 45° I 30° .Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of aluminium extrudedwith serigraphed glass cover. Luminaire size should not exceed to 320 x 130 x 147 nun. Ingress protection rating (DIN EN 60529):IP66impact resistance IK 07 . The luminaire should be provided with Electrica l safety class L Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements.BIS Certified Mandatory. LM79from UL I NABL approved Lab and LM80 Reports to be submitted . |
| 23 | Supply, installation, testing and Commissioning of Color Changing 150W LED Round Projector Light Individual addressable suitable for FacadeLighting.Luminaire should Controlled through DMX/Ethernet protocol using Data fonuatting device and Controller, Controller can adlieve I 6.7M colors. Rated input supply of DC 24V constant voltage.Light colour RGBW (W:5500-6000K), LED Make :CREE I LUMINOUS I OSRAM I SEOUL I SAMSUNG. Mean rated service life L70 (tq 25 °C) = 50,000 hours.Luminaire luminous flux range 4500-6000 Lm. Housing should be aluminium die-cast construction with powder-coated finish having toughened glass cover on front, optical lens for proper light throw. IP protection rating (DIN EN 60529): IP66, impact resistance IK. 07. The luminaireshould have beam angle :30°/45° ( as per site requirement ) with external power supply and external decoder. The luminaire should provided with Electrical safety class ,Operating Temperature : 10°C to +50°C.Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements, BIS Certified Mandatory . LM79 from UL I NABL approved Lab and LM80 Reports to be submitted. |
| 24 | Supply, installation, testing and Commissioning of Color Changing Surface-mounted Individual addressable Linear luminaire suitable for facade Lighting . Luminaire luminous flux range 2500-2800 Lm,Luminare wattage should be 72W. Luminaire should Controlled through Bluetooth I Wi fi I D.MX/Ethernet protocol using Data formatting device and Controller, Controller can achieve 16.7M colors. Rated inputsupply at DC 24V constant voltage with external power supply and external decoder. Light colour RGBW (W:5500-6000K LED Make :CREE I LUMINOUS I OSRAM I SEOUL / SAMSUNG. The luminaire should have optics : 15°x45° I 45° I 30°.Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of aluminium extruded with serigraphed glass cover. Luminaire size should not exceed to 1200 x 95 x 50 lllfil Ingress protection rating (DIN EN 60529): IP66. Anti glare louvre is mandatory to avoid glare. The luminaire should be provided with Electrical safety class I. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired strnctural elements.BIS Ce1iified Mandatory. LM79 from UL I NABL approved Lab and LM80 Reports to be submitted. |
| 25 | Supply, installation, testing and Commissioning of rack mounted DMX 512 Splitter with Input voltage range: 190-280V; Input signal interface: XLR male and female socketsparallel; Output signal interface; XLR female socketparallel ; Inpm Power range: 90V-240 VAC; Frequency range: 50HZ to 60HZ etc. |
| 26 | Supply, installation, testing and commissioning of High End Media Server with interfaces as per the technical specifications for PC with flat screen 24\" HD HDMI LED monitor complete with keyboard mouse etc. for Laser, Lighting, SATA/SAS Hard Drive/Solid State Drive Output Media Server specifications: - Intel Xeon W-3223 3.5Ghz 2666MHz 8 Core CPU, 32GB (2x16GB) DDR4 2933 DIMM ECC Memory, 2 X512GB 2.5in SATA Solid State Drive, 256GB 2.5in SATA Solid State Drive, NVIDIA Quadro RTX 4000/ P 4000/ M4000 8GB Graphics Card, DVD Writer, USB wired Keyboard & Mouse, Windows 10 Pro 64 bit. Item to include all material, labour and carriageMain server and slave server, Make : Dataton I Asus I HP I Dell |
| 27 | Supply,installation, testing and commissioning of Show Control software complete with necessary software and hardware interface, license as required , Ability to run on Ethernet network and non-proprietory hardware with players and display servers and built-in license, user interface built around three main windows: Stage, Media, Timeline, Windows platform, Localized language versions, Realtime composition of media, Realtime show rendering, Live interaction, Live edit, Soft-edge blend, Built-in geometry correction, Stereoscopic production, Dynamic image server – HTML5-based, Live capture, Frame-rate control, DMX for lighting through Artnet, Multi-channel audio playback, Realtime effects and scaling Make :Dataton I Coolux (Christie) I D3 I Medialon I AV Stumpfl. |
| 28 | Supply,installation , testing and commissioning of 40 KVA, on-line UPS with all safeties and protection and suitable capacity sealed maintenance free batteries, with a 30 minutes. backup time on full load with MS open MS Battery rack and Nyvincable as required,Make :Liebert Emerson I Microtek I Eaton I APC. |
| 29 | Supply,installation, testing and commissioning of DVI Extender Transmitter and Receiver, Make :Kramer I Extron I TV One. |
| 30 | Supply, installation, testing and Commissioning of Rack Mountable 24 Port Gigabit switch, Make :Dlink I Cisco I Netgear I Trendnet |
| 31 | supply,installation, testing and Commissioning of Speaker Connectors l\1L 8 Make: Nutrik |
| 32 | Supply,installation, testing and Commissioning of Speakon Connectors·NL 4 Make: Nutrik |
| 33 | Supply, installation, testing and Commissioning of DMX signal Wire 2 core 23/0.2 ATC conductor PVC insulated, over all shielded with copper screening & PVC sheathing. Make : Asian I Belden I CSC |
| 34 | Supply, installation , testing and Commissioning of Speaker cable Stranded 2 X 2.5 sq 1llll1, PVC insulatedandsoft PVCsheathedcopperlow loss, low conductance.Make: CSC |
| 35 | Supply,installation, testing and Commissioning of Speaker cable stranded 2 X 4 sq mm, PVC insulated, soft PVC sheathed low loss copper conductor with low inductance . Cable. Make: CSC |
| 36 | 2.5 sqmm x 3 core armard aluminium Cable Make: Policab/Havells/National |
| 37 | 6 sqmm x 3 core armard aluminium Cable Make: Policab/Havells/National |
| 38 | 50 sqmm x 3.5 core armard aluminium cable Make: Policab/Havells/National |
| 39 | DMX signal Wire 2 core 23/0.2 ATC conductorPVCinsulated, armard,overallshieldedwith copper screening & PVC sheathing. Make: Krystal/Belden/Kramer |
| 40 | 1”PVC Conduit Pipe Make:AKG/fine flow/Allwin |
| 41 | 2” PVC Conduit Pipe Make:AKG/fine flow/Allwin |
| 42 | 50mm DWC Pipe for Make:AKG/fine flow/Allwin |
| 43 | 25mm Flexible Pipe Make:AKG/fine flow/Allwin |
| 44 | CAT6 UTP Cable supports Gigabit Ethernet (1000 Base-T) standard. Operates at a bandwidth up to 250 Mhz Make: Dlink/Policab/Kramer |
| 45 | Poly Carbonate Square Hensel/AKG Junction Box for power supply/Driver Size: 12”10” Make: Hansel/AKG |
| 46 | Poly Carbonate Square Hensel/AKG Junction Box for power supply/Driver Size: 4”4” Make: Hansel/AKG |
| 47 | Poly Carbonate Square Hensel/AKG Junction Box for power supply/Driver Size: 8”8” Make: Hansel/AKG |
| 48 | SITC Earthing with Copper ea11h plate 600 mm X 600 1llill X 6 mm thick including accessories, and providing masoruy enclosure with cover plate having locking arrangement and watering pipe of 2 .7 meter long etc. with charcoal/ coke and salt as required. |
| 49 | Supply, installation, testing and commissioning of cubical panel fabricated out from 16 SWG CRCA sheet with required bracings and supports, gasket with foam rnbber to make the panel dust and vermin proof, together with degreasing and applying two coats of red oxide and two coats and stove enamel paint. The panel shall include all required hardware\"s, molded insulators and separators including cutting and making space in compartmental fonnation . with minimum following specification: 250 A MCCB 35 KA 3 Pole - 1 No., Rota1y operating mechanism - 1 No., Digital volt meter - INo ., VSS - l No.,Digital Ammeter - l No., ASS l No. , CTS 100/5A -3 No., LED indicator light -3 Nos., Outgoing 63A TPN l OKA-4 No., 32A TPN l 0 KA -4 Nos..6-32 A DP MCB -20 No., 6-32 Amp SPMCB - 30 Nos., 2 A SPMCB- 6No. and Copper bus bars, inter connection with copper wires, glands and thimbles etc. complete In all respects. Main show panel Board -IP 44. |
| 50 | Control room size atleast 12\" x8\" as per site conditions and available space with interiors and elevated modular flooring, wall textures, modular false ceiling, lighting furnishing, Air Conditioner etc |
| 51 | 3-Chip DLP or better Laser Projector with complete dust protection as per IP60 standards, Min.30,000 ISO Lumens or brighter, Laser light source having 20,000 hrs. life, 4K-UHD (3840x2160) display resolution or better, Contrast ratio (Native)min.1800:1 or better ,HDR Supported,24/7 operation ,PC 3D ready ,Anamorphically ready, Filter less operation with liquid cooled technology ,Inputs: 1xDisplay port, 2xHDMI, 1xHDBaseT, 3G-SDI in /out controls : 3D sync in/out, Crestron Room View Connected , LAN ,RS-232, AMX,DMX Art-Net along with Suitable long throw lens.Make: Marco I NEC I Digital Projection I Christie I Barco I Panasonic . |
| 52 | CIVIL WORK |
| 53 | Development of Area around Ticket Counter,Sitting Area ,Open Additional Area with With Sub- base of PCC (1:4:8) 75 mm thickness and fixing of Grade M-35 Interlocked Paver Block Thickness (60 =) Area approximately 1650 sq.mtr |
| 54 | Development of RCC toilet facilities for both Gents and Ladies. Approximate Area with complete fixture and fittings |
| 55 | Development of RCC Guard Room and Storage Facility |
| 56 | Manual Boom Barrier on both sides of the road |
| 57 | Refurbishment (i.e.Cleaninganddismantlingoftemporarystrnctureontheprojection fa ade |
| 58 | Development of facade building for the projection , MahilaJailandits side walls with Wall Putty-Birla/JK Cement or equivalent and ExteriorPaintwithPrimer- AsianPaints Ultima Apex/Berger WeatherCoat or equivalent |
| 59 | Manpower |
| 60 | Manpower for 1st Year |
| 61 | Manpower for 2nd Year |
| 62 | Manpower for 3rd Year |
| 63 | Maintenance 1st Year (Defect Liablity Period) The electricity bill shall be paid by the successful bidder during the Operation and Maintenance period and the same shall be reimbursed by BSCL as per actuals. |
| 64 | Maintenance 2nd YearThe electricity bill shall be paid by the successful bidder during the Operation and Maintenance period and the same shall be reimbursed by BSCL as per actuals. |
| 65 | Maintenance 3rd Year The electricity bill shall be paid by the successful bidder during the Operation and Maintenance period and the same shall be reimbursed by BSCL as per actuals. |
