|
| 1 | Construction of FSTPExcavation in soil by manual means (Excavation for roadway in soil using manuyal means including loading in truck for carrying of cut earth to embankment site with all lifts and leads upto 1000meters.) |
| 2 | Wet Mix Macadam (Providing, laying,spreading and compacting graded stone aggregates to WMM specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in sub-base/basecourse on well prepared surface and compacting with vibratory roller to achieve desired density. with vibratory rollar |
| 3 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil Item-A) and disposal of excavated earth as obtained to a distance up to 50M. Including all lifts with leveling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E\I. |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m and lift of 1.5 m all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 5 | Providing coarse clean sand in filling in foundation trenches including ramming & watering in layers not exceeding 150mm thick with all leads & lifts including cost of all materials, labour, royalty & taxes all complete as per building specs.and direction of E/I. |
| 6 | Providing designation 75 A Brick work in CM (1:4) in foundatoin & plinth |
| 7 | Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing designation 75A Brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mmthickmortarjoints,costof screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level.1:3:6 (1 Cement :3 Coarse Sand (zone - III) : 6 graded stone aggregate 20mm nominal size) |
| 10 | 1:4:8 (1 Cement :4 Coarse Sand (zone - III) : 8 graded stone aggregate 40mm nominal size) |
| 11 | 1:4:8 (1 Cement :4 Coarse Sand (zone - III) : 8 graded stone aggregate 40mm nominal size) |
| 12 | Providing & Laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing 1:1.5:3 (1 cement: 1.5 coarse sand (zone - III):3 graded stone aggregates 20mm nomibnal size) |
| 13 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zoneIII) : 4 graded stone aggregate 20mm nominal size). |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluing cost of centering shuttering finishing and reinforcement - all work upto plinth level 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers abutment, post and struts etc. above plinth level up to floor five level excluding cost of centring , shuttering finishing and reinforcement:1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in beams, suspended floors , roofs having slope uot 15 degree landings, balconies, shelves, chajja, lintels, bands, plain window sills, staircase & spiral stair cases above plinth level upto floor five level excluding the cost of centering , shuttering finishing and reinforcement, with 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size)In Slab |
| 17 | Centering and Shuttering including strutting, propping etc. and removal of form forFoundation, footing, bases of columns, etc for mass concrete |
| 18 | Supply, fitting and fixing good quality well dressed and well seasoned sal wood work in chaukhats in doors, windows opening…. Including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I. |
| 19 | Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formaldehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 20 | Supplying fitting and fixing oxidised iron fittings of approved quality and make to doors and windows all complete as per building specification and direction of E/I 100 mm butt hinge |
| 21 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape placed in position and fixed in R.C.C. slab/ beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by deppt.) |
| 22 | Supplying, fitting and fixing fully glaxed steel door, windows or ventilations of standard rolled \"Z\" and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick palin glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I. |
| 23 | Providing Tor steel reinforcement of 8mm. Dia rods as per approved design & drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position {TMT Fe 500 (only valid for Tata(Tiscon), Sail, JSPL, Electrosteels Ltd. Bokaro and vizag (RINL)} (excluding carriage of bars to work site) all complete as per building specification and direction of E/I 8 mm and 10mm |
| 24 | 10 mm |
| 25 | Providing and making flat brick lining over and above 50 mm thick 1:2:4P.C.C. the brick pitching will have 10 mm groove and shall be filled with 1:4 cm. |
| 26 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 27 | Providing 50 mm thick cement concrete flooring 1:2:4 with 20 mm to 6 mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing , taxes, royalty all complete as per building specification and direction of E/I. |
| 28 | Extra for Providing and fixing 30x4mm glass strips in joints of flooring, complete job as per specifications and direction of E/I. |
| 29 | Providing and laying hydraulically machiine pressed terrazo tilles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm, thick bed of lime mortar (1:1:1) (lime: surkhi: sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, roualty and taxes all complete as perbuilding specification and direction of E/I. (c) any light colour with 100% white cement |
| 30 | Providing and laying hydraulically machiine pressed terrazo tilles 20mm thick in skirting of approved texture with 4 mm down marble chips of approved shade, size and quality, over 12mm thick cement palster (1:3) base with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, roualty and taxes all complete as perbuilding specification and direction of E/I. (c) any light colour with 100% white cement |
| 31 | Providing and laying 25mm thick kota stone in risers of steps, skirting and pillars of approves size, texture and colour laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, royalty and taxes all complete as perbuilding specification and direction of E/I. |
| 32 | Providng 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curingwith all leads and lifts of water, scaffolding taxes and royaltyall completeasperbuildingspecificationand direction of E/I. |
| 33 | Providng 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 34 | Providing 6mm thick cement plaster (1:4) in ceiling with celean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 35 | Providng 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curingwith all leads and lifts of water, scaffolding taxes and royaltyall completeasperbuildingspecificationand direction of E/I. |
| 36 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I |
| 37 | Structural Steel work in single section, fixed with or without connecting plate, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. |
| 38 | Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joists, channels, angles, Tees, flats, plates, lattice members, built up compound sections in columns, girders, staircase, or trusses including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per building specification and direction of E/I. |
| 39 | Providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required, scaffolding washing floors and taxes all complete as per building specification and direction of E/I. |
| 40 | Providing two coat of snowcem of approved shade and make over a coat of cement of primer on new surface mcluding preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I. |
| 41 | White washing three coats over new surface in ceiling. |
| 42 | Providing french spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed french polish including cleaning the surface after removing dirt scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 43 | Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. |
| 44 | Cement Concrete Pavement ( Construction of un-reinforced , dowel jointed , Plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum , coarse and fine aggregate confirming to IS: 383, maximum size of coarse aggregate not exceeding 25mm mixed in a bacthing and mixing plant as per approved mix desing , transported to site laid with a fixed or lip form paver spread compacted and finished in a continous operation including provision of contraction , expansion construction and logitutednal joints , joint filter , seperation membrane sealant primer joint sealant debonding strip dowel bar tie rod admixture as approved curing compound finishing to lines and grades as per drawing |
| 45 | E/W in exavation of cut off trenches by the hydraulic excavator as per designied section in soft rock (where blasting is not needed) (vide classifictaion type of soil item-C ) with disposal of spoil beyond 1/2 km from centre of trench but upto 1 km with all lifts by tipper including construction and maintenance of haul road allcomplete as per specification and direction of E/I |
| 46 | Supplying and laying gravel filter (sixe 5mm to 15 mm) in filter blanket and in toe drain (in horizontal portion of Dam) as per design and drawing with watering, compaction including cost of material, royalty all taxes etc but excluding the cost of carriage all complete as per specification and direction of E/I |
| 47 | Supplying and laying good quality stone metal filter (20mm to 63mm size) in rock toe, heel trench, toe drain as per design and drawing including cost of material, royalty, all taxes etc but excluding cost of carriage all complete as per specification and direction of E/I |
| 48 | Sand |
| 49 | Chips |
| 50 | Metals |
| 51 | Cement |
| 52 | Steel |
| 53 | Bricks |
| 54 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) |
| 55 | Gutter (600 mm over all girth) |
| 56 | Providing & fixing M.S holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the wall etc. |
| 57 | 110 mm diameter |
| 58 | Square shape 450 mm internal dimensions |
| 59 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cemnt: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 60 | Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete (0.80mm thick with zinc coating not less than 275gm/m2) |
| 61 | Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.0.8 mm thick with zinc coating not less than 275 gm/Sqm. |
| 62 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 63 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A.110 mm shoe. |
| 64 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter. |
| 65 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : |
| 66 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarsesand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 67 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 68 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 69 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge |
| 70 | Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cmand as per direction of the officer-in-charge |
| 71 | Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge |
| 72 | Providing and stacking of Bassia latifolia (Mahua) of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge |
| 73 | Supply laying and jointing perforeted HDPE pipe300 mm dia |
| 74 | Supply laying and jointingperforatedHDPE pipe150 mm dia |
| 75 | Providing & fixing 1.5 mm HDPE geomembrane at land fill site including insitu welding of HDPE membranes, laying, anchoring in trench, seaming, testing as per manufacturers directions as per standard design & drawings. |
| 76 | Supply laying and jointing HDPE pipe 150 Dia |
| 77 | Supply laying and jointing HDPE pipe 150 Dia |
| 78 | Tractor Engine 45/50HP |
| 79 | Deslugding Machine |
| 80 | Goods & Service Tax (GST) |
| 81 | Labour Cess |
