Comprehensive Conservation Works Of Information Centre, Bathing Ghat And Tomb Of Pareekshithu Thampuran At Hill Palace Museum, Tripunithura
Tender Value
16.95 Lakhs
Estimated cost
Bid Submission
30 Dec 2021
0 days left
EMD
42400
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hill Palace Museum, Tripunithura, Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Conservation Works Of Information Centre, Bathing Ghat And Tomb Of Pareekshithu Thampuran At Hill Palace Museum, Tripunithura
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge. |
| 2 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping groundor as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level-1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level-1:3;6 (1 Cement :3 coarse sand : 6 graded stone aggregate 40 mm nominal size). |
| 5 | 12 mm thick Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 6 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement:6 coarse sand) etc complete. |
| 7 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete. |
| 8 | 12 mm cement plaster of mix : 1:4 (1 cement:4 coarse sand). |
| 9 | Providing and laying factory made chamfered edge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required length,thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead, for thickness of tiles 10 mm to 25 mm. |
| 11 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 12 | Repairs to plaster with cement mortar 1:4 (1cement: 4 coarse sand)of thickness 12 mm to 20 mm, in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-in-Charge. |
| 13 | Dismantling G.S. sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead. |
| 14 | Demolishing R.C.C. work manually including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 15 | Demolishing brick work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 16 | Steel work in built up G I tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 17 | Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 19 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete, Ridges plain (500-600 mm). |
| 20 | Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. |
| 21 | Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. |
| 23 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing white vitreous china pedestal type (European type / wash down type) water closet pan. |
| 25 | Providing and fixing white P.V.C. low level flushing cistern, 10 litre capacity, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. |
| 26 | Providing and fixing white solid plastic seat with lid for pedestal type W.C. pan complete. |
| 27 | Providing and fixing White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P. brass pillar taps, C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. |
| 28 | Providing and fixing 32 mm dia P.V.C. flexible waste pipe for sink or wash basin including PVC waste fittings complete. |
| 29 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 30 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 31 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications, Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. |
| 32 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete, with 2nd class teak wood beading 62X19 mm. |
| 33 | Providing and fixing double scaffolding system (cup lock type) on the exteriorside of structure, up to seven storey height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia MS tube, placed 1.50 m centre to centre, horizontal andvertical tubes jointing with cup and lock system with M.S Tubes, M.S. tube challies, M.S clamps and stair case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing itthereafter.The scaffolding system shall be stiffened with bracings, runners connected with the buildings etc. wherever required for the inspection of work at required locations with essential safety features for the workmen etc. complete as per direction of the engineer in-charge. The elevation of the scaffolding shall be measured for the payment purpose. The payment will be made once in irrespective of duration of scaffolding. |
| 34 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 35 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 meters span and 5 meters height including stacking the material within 50 meters lead, of sectional area 40 square centimetres and above. |
| 36 | Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete. |
| 37 | Supplying and fixing Dept. wood wrought and put up for roof members including cost and conveyance of materials etc. complete. |
| 38 | Ceiling 12 mm Anjili wood planks, planed lap jointed and wire nailed to rafters and collars including all cost of materials labour charges etc complete. |
| 39 | Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete. |
| 40 | Providing & fixing on roof pressed clay tile of 20 mm nominal thickness and of approved size and as per approved pattern. |
| 41 | Providing & laying on roof pressed clay tile ridge of 20mm thickness and of approved pattern. |
| 42 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers complete, 1.60 mm thick with zinc coating not less than 350 gm/ m2. |
| 43 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new work |
| 44 | Providing and fixing Anjili/Jack wood paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge. |
| 45 | Providing wood work using good quality Anjili wood /jack wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 46 | Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood. |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 48 | Earth work in excavation of all kinds of soil by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 49 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 50 | Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Above plinth level upto floor V level. |
| 51 | Varnishing with varnish of approved brand and manufacture: Two or more coats of gluesizing with copal varnish over an under coat of flatting varnish. |
| 52 | Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 53 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 54 | Supplying and fixing 150mm diaPVC water gutter semi-circular section including fitting with 10 mm flat supported at 1 minterval etc. complete |
| 55 | Flooring with departmental terracotta tiles of size 225x225mm laid on cement mortar 1:4(1 cement :4coarse sand)with 4 mm open joints, grouted and pointed with cement mortar 1:2(1 cement : 2 fine sand |
| 56 | Pressure washing throughly with water, twice, using compressor and with necessary detergents to clear out all the rubbish and algae growth on the horizontal and vertical surfaces of the royalbathing ghat as per direcion of departmental officers at site, including all the charges of compressor, labour and other materials etc. complete |
| 57 | Supplying and laying rough top granite slabs of 45x20 cm or nearest available size, 60 mm thick over a bed of 75 mm thick 10 mm nominal size broken stone as per direction of departmental officers at site,including all the cost of materials, conveyance , labour charges etc. complete. |
| 58 | Engaging man mazdoor for clearing of the rubbish and other wastes generated during the conservation works to a place with in the campus as directed by departmental officers at site |
| 59 | Basic Electrifical repairs and plumbing works including fixing of fixtures and cabling to the information centre. |
AI Tender Summary
Tender Timeline
Dec 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender