Directorate Of Vocational Education And Training-DVET has published Bids Are Invited For Small Crimping Tools ( Assorted ) 10-100Mm ( 5 Nos ) - Jaw Set- Carbon Steel Grade Scm440, Frame- Material Steel Grade S45c, Handle-Pp For Better Grip , Plumb Bob 115 Grams - Material Cast Iron, Weight 115 Grams + 5%. Submission Date for this Tender is 06-01-2022. Coats and Jackets Tenders in Ahmednagar Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2021 | 06-01-2022 |
| Sl. No. | Item Title | Item Description |
| 1 | Small Crimping Tools(Assorted) 10-100mm (5 Nos) | jaw set- carbon steel grade SCM440,Frame- material steel grade S45C, Handle-PP for better grip |
| 2 | Plumb Bob 115 grams | Material Cast Iron, Weight 115 grams + 5%,Should be supplies with Good Quality Rope |
| 3 | Terminal Screw Driver 75mm Connector | Dimensions Size: 3 mm X 75 mm (A - 75 mm, D - 3 mm),Tip Bit Size: B X T : 3.0 mm X 0.5 mm,Blade made of high grade Silicon - Manganese Steel (EN 45 A),Hardness on Tip: 55 - 58 HRC Handle Handle should be made of high grade CA Plastic, which is non - flammable , |
| 4 | Bradawl 150mmX6mm Square Pointed | Size 150mmX6mm ,Silverline Point Square Bradawl with Wooden Handle |
| 5 | Wooden mallet 1 Kg(75mmX15mm) | Total Length: 325mm ±3mm,Max.Width.: 130 ±1mm,Width: 115 ±1 mm, Thickness: 75 mm±1mm,Wood material: HardWood,Finishing: Fine finishing with body or chamfered |
| 6 | Working Bench 2.5m x 1.20 mx0.72 meters | The overall size of the Work Bench shall be 2500mm (W) x 1200mm (D) X 750mm(H), The main legs used in the entire system are fabricated by CO2 welded MS |
| 7 | Metal Rack 180cmx150cmx45cm | Number of Layers Five ,Material of Angle Mild Steel Slotted Angle (Powder Coated) 40 x40 mm x 1.9 mm thick, Material of Shelve Pre Coated CRC Sheet 1 mm Thick, Load capacity per Layer 50-100 kg, Unit Size 150cm (H)x100cm (W)x45 cm (D)148.8 Fitting By M8 MS Nut Bolts & ‘L’ shaped Braces with adjustable Height. |
| 8 | Wiring Board 3 meter x 1 meter with 0.5 meter meter projection on the top | Length- 3 mtr , Width- 1 mtr ,Ceiling length & width – 3mtr x 0.5 mtr, Thickness- 35mm, Height of stand 0.75 mtr , Material – pine wood of Thickness- 35mm, Frame structure – 2mtr x 3mtr MS square pipe 50 mmx1.6mm thick fabricated. |
| 9 | Safety belt with provision for keeping tools | Material: Polyester Strap , Standard: EN813 EN361 EN358 ,Size: Universal,Pattern : Webbe , Two-colored harness , back anchorage point , 1 front anchorage point. ,1 ventral anchorage point for rope access , Tool-holding rings , Work-positioning belt , With lateral D-rings , Adjustable shoulder and leg straps ,An extension band, Padded leg straps |
| 10 | Cleaning tray 45x30 cm | 1. 45 CM X30 CM X 8 MM Heavy Duty Washer,2. 22-gauge GI Sheet,3. Machine Drain Pan,4. Galvanized Steel,5. Drip Tray Catch,6. Leak proof |
| 11 | Flux Meter | 1. Measuring range: 20mwb,2.Basic error:±1%,3. Sensitivity: 1µwb,4. Instability:1 bit/10s,5.Input impedance:20KO,6.Surrounding temp:5?~40?,7. Related humidity:20%~80%(no Lon), 8.Power supply:AC220V50Hz, 9.Display: LED,Positive and negative display automatically |
| 12 | Thermostat | 1. Working condition , 2. Generally, about 200 degrees F, 95 degrees C ,3. Parts catalogue suitable sketch on Vinyl Board ,4. Suitable for Heavy vehicle ,5. Material Brass and MS |
| 13 | Ceiling Fan coil Winding Machine 250 v ,50 Hz,1-Q with speed control | 1) Capacity 35 to 40 Stator Per Day 2)Counter Type 3 Digit FRD 3)Stator Diameter 105mm to 165mm 4)Frequency 50 Hz 5)Wire Gage 30 to 406)Winding Direction Clockwise7) Phase Single with speed control 8)Motor 1/4 H.P. Single Phase 220v.AC 9) Power Supply 220v.AC 10)Machine Type Automatic 11) Dimensions 810mm x 280mm x 1500mm 12) Standard accessories a) all Standard Dies and stand b) Wire guidesd) Spool container with tensioner mounting stand INSTRUCTIONS : A) OPERATING MANUAL WITH CIRCUIT a)DIAGRAM MUST BE PROVIDED. b)) PRACTICALS LIST TO BE PERFORMED SHOULE BE PROVIDED.WITH CIRCUIT DIAGRAM c) CONTROL BOARD SHOULD BE FITTED WITH NUT & BOLT PROPERLY AT THE INSTITUTE TO PERFORM PRACTICALS AT MANHEIGHT LEVEL FOR TRAINEE’S SAFTY |
| 14 | Solar Street light lamp set 12 v,18/24 watts | 1. Solar Panel (Solar Photo Voltaic Module): The MNRE approved indigenously manufactured , PV Module should be used and should have poly crystalline silicon solar cells. , The power output of the modules under STC should be a minimum of 150Wp. ,The open circuit voltage of the PV Module under STC should be at least 21.0 volts.,The module efficiency should be minimum 14%. The terminal box on the module should have a provision for opening it for replacing the cable ,The module shall be designed to withstand tough environment conditions conforming to IEC 61215 Edition II/ BIS 14286. |
| 15 | Manual Motor Coil winding Machine With step arbor | 1) With straight and step coil arbors 2) Should wind both single and three phase motor coils. . 3) for winding motors from 1/2 hp to 40 hp. 4) No of arbors - five Step arbors-01 No straight arbors-01 No 5)Material of arbors Aluminum 6) with Manual counter 7)Count Range: 0-9999 rings 8)Size & MaterialSize - Base 13" x 15" Package Dimensions: 13 " x 8" x 10" 8) Material - Mild Steel 9) Features: 10) Easy operations 11) Easy functioning 12) Superior performance |
| 16 | Set of wall jumper octagonal 37mmx450mm and 37 X 600 mm | 1. Shape :Octagonal , Size : 37mm X 450mm & 37mm X 600mm , Material : EN8 |
| 17 | Scraper Triangular 250 mm | 1. Triangular 11-12-2021 I. Total Length: 330 mm ± 2mm,II. Blade Length: 250 mm ± 1mm , III. Blade Width: 16 mm ± 1mm , III. Blade Width: 16 mm ± 1mm , 2. Blade Material: High Carbon Steel , 3. Blade Hardness: 55 - 60HRC,3. Blade Hardness: 55 - 60HRC ,4. Handle with proper grip wooden / plastic |
| 18 | Tower ladder on type wheels Min 10ft-Max 30ft | Specification : Size10 to 30 feet , StructureAluminium , Foldablenon foldable , Coloraluminium , Rope 8 mm size Confirming IS : 733-1983, 1285-1975 ,Featuresaluminium ,Capacity150 Kg ,MaterialAluminum, mild steel, rubber wheel , Ladder Typetower ladder , Main frame: This ladder should made up of aluminium alloy “C” section 66*32*3.18 mm thickness. HE30/ 6351 /T6 GradeMechanical properties – UTS(Mpa)-353.14 , % Elongation on ,Steps: The steps should made up of non slipaluminium alloy corrugated fluted pipe step of 1” dia and 3 mm thickness HE30 / 6063/T6 GradeMechanical properties – UTS(Mpa)-182.22, % Elongation on 50mm GL- 14, 0.2% Proof stress Mpa – 173.53 (Certificate confirms to IS 733) ,Step Interval: Every step should has an interval of 12” for easy climbing and the ladder has a single sliding movement. Both sides of the flutted pipe steps should covered with plastics caps to avoid insects going in.,Platform size: Platform size:17.5×19 inch which should made up of aluminum alloy frame with aluminum “L” angle and Chequered sheet of 3 mm thick ,,MS Trolley: The ladder base should made of MS Channels (100*50*6mm) and the “L” angle (50*50*6mm). The MS trolley size should 5 feet x 6 feet on ground. |
| 19 | Stud remover with socket handle | 1. Capacity: 20mm ,,2. Material: Chrome vanadium Steel ,,3. Eccentric roller grips stud more firmly,,4. Should be compatible to half inch square drive wrench ,,5. Should be supplied in Wooden / Plastic Box with proper cushioning |
| 20 | Anvil With Stand 50kg | 1. Total Length: 515 ±2mm ,,,2. Total Width: 155 ± 1mm ,,3. Base Length: 265 ± 1mm ,,,4. Height: 240 ± 1mm,,,5. Total Weight: 50Kg |
| 21 | Foot Print Grip 250mm | Specification : 55.2 Jaws Made from Drop Forged Alloy Steel , Hardened and Tempered, Quick Release ,,Lever for Adjustable Opening ,, Vice Grip Plier,,Length : 250 mm |
| 22 | Blow Lamp 1 Liter | Specification: Material Used: Brass & Iron Steel ,,Additional Name: Brass Pressure Kerosene Blow Lamp ,, Capacity of Tank : 1 Lit. ,, Provided with Handle for smoth grip |
| 23 | "v" Block 75x38mmpair with clamps | 1. Total Length: 75 mm ±1mm ,, 2. Total Width.: 38 mm ± 0.2mm ,, 3. Total Height: 38 mm ± 0.2mm ,, 4. Angle: 90 Degree |
| 24 | D.C. Series Motor with 2 point starter 3 HP 250 V with 3 point starter and speed regulator (Laboratory type) | 1)Basic Item Specification An integrated panel workbench consisting of instrument panel and working table should suitable for students to learn and perform various experiments of electrical related subjects. Instruments should internally electrically connected andshould be fitted in the panel such that only front panel and necessary interfaces areeasily accessible to use. Structure of workbench should be made up of 1.5 mm thickCRC powder coated pipes with top made up of good quality 19 mm thick plywood andcovered with 1.8 mm off white colour mica. 9)Control Board: Technical Specifications of DC Machine (Motor) 24) Type: Series 25) Power Rating: 3 H.P. 26) Voltage Rating: 220V ± 10% 27)Rated Speed: 1500RPM ± 7.5% 28) Insulation: Class "B’ 29) Confirming To I.S.: 4722-1992 30) S.P.D.P. Type,Horizontal Foot Mounted 31) Loading Arrangement: Mechanical, fitted on machine base “C” channel,Durable good quality Spring Balance: 2 Nos. (Tubular Type) with Belt,Brake Drum/Pulley: Aluminum cast with heat suppression Facility 32) Machine Base: Fabricated MS “C” Channel (75 x 40 x 6 mm) |
| 25 | Rubber matting 2meterX1meterX9mm | Specification : 1)Size2mtr X 1mtr X 9mm(Thickness) ,, 2) Material- Synthetic Elestomer ,,3)Insulation Resistance : 100000 M Ohms min. ,,4) Leakage current : 10 mA. Max.,, 5) Class A, Working Voltage 3.3 KV,, 6) Di-Electric Strength 30 KV,,7) Confirming to IS-15652:2006 |
| 26 | White Board Size 1200mm X 900mm | 1)Size of White Board: 4 X 6 feet. ,,2)Confirming to IS CODE – 3087, 733 ,, 3) White Board with Ceramic Coated Steel Sheet Top Surface: ,, |
| 27 | Philips Screw Driver set of 5 pieces | 3. Sizes: 1 A:100mm D:6mm TIP SIZE:00 ,,.2 A:150mm D:6mm TIP SIZE:0,,3 A:200mm D:8mm TIP SIZE:1,,,4 A: 250mm D:8mm TIP SIZE:2,,5 A: 300mm D:10mm TIP SIZE:3,,4. Blade made of High-Grade Silicon – Manganese Steel,, |
| 28 | Forge with hand blowers | Specification :1) Blower Type Hand BlowerAllu. Cast material with Cast Iron Furnace 2)Operate Mechanism Worm & Gear with Handle 60.4 Size/Dimension 16" x 8" x 8.5" approx. 3) Usage/Application Hand Blower can be used for Industrial Purposes ByBlacksmiths 4) Weight 6kg approx. |
| 29 | Trowel 150 mm | Specification : 1)Length: 150 mm,,2) Weight: 250grams+10%(Approx.) ,,3) Blade: HighCarbonSpringSteel,,4)Thehandleshouldbelacquerpolished,,5) Handleshouldbemadefromselectedhardwood,,6)Thehandleriseshouldbe setforcorrect hang&balance.,,7) Theblade shouldbehardened&temperedtoensuredurability. ,,8) Blade shouldbepolishedfromthe bottom& powdercoatedfromtop,,,9) Woodenhandle shouldbeattached forcomfortablegrip |
| 30 | Magneto spanner set with 8spanners | 1. Sizes: 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19,20X22,,2,Slightly Rounded handles – Sand Blasted,,3.I - section design of handle and heads to combine strength and low weight,,4.Thoroughly corrosion protected with Nickel chrome finish,,5.Head at each end are of different sizes and set at an angle of 15degrees |
| 31 | All types C.F.L.lamps sets 5 watts,15 watts,25 watts | Specification : 1) Watt 5,15,252) Range Voltage (V) 120V-300V 3) Lumen (Lm) 43004) Power Factor 0.555) Average Life(Hours) 6000 Hrs |
| 32 | Single phasing preventer 415v | 1)Voltage 415V AC 110.3 Frequency 50 Hz 2)PHASE Three 3)Protection Low Voltage, Zero Voltage,Unbalance Voltage, Negative Phase Sequence, Single phasing 4) Reset Automatic ,also manual reset should provided 5)Indication By LED should provided |
| 33 | Metal Clad circuit breaker (MCCB) 220v X 1A | Specification :1) No.of poles 2 Pole,,2) Rated current 1 Amp,, 3) Voltage 220 V,,4) Rated Shortcircuit breaking capacity 10KA,15KA,, 5) Phase Single Phase,, 6) Frequency 50 Hz,,7) Mounting Type DIN Rail,,8)Curve Type B/C/D 9)Standards EN /IEC 60947-1 & 2 |
| 34 | Lead Acid Battery 75AH 12 V | 1) Capacity 75 AH,,2) Voltage 12 V DC ,,3)Type Lead Acid type,,4) Encloser Tough Plastic container with Handle,,5)Terminals + ve& - ve Terminal on top,,6) Gas vents should be provided on top for each cell |
| 35 | Split Phase Motor 1/2 HP Single phase 250 V | Specification : 1) Type Split Phase With C.F switch,, 2) Frequency 50 Hz,, 3) Voltage 230-250 V,, 4) Number of poles 4(5) Degree of Protection IP65,,(6) Synchronous speed 1500 rpm,, 7)Output rating 0.5 HP,,8) Mounting Horizontal Foot-mounted,, 9) Terminal box¹ With Terminal Box 10) Confirming IS : 325 11) Enclosure IC410 – SPDP |
| 36 | Portable Extention Ladder Aluminium 6 to 9 meters | Specification : 1)Size 6 to 9 Mtrs, collapsible with pully, Rope & Locking Hooks 2) Material Heavy duty Alluminium (Hindalco) 3) Steps type 1” Dia 66.5 Bottom Width 15” (4) Feets Rubber Grip Feets 5) Type Portable Extension Ladder ,,,(6)Main frame: This ladder should made up of aluminium alloy “C” section 66*32*3.18 mm thickness. |
| 37 | Chain Pulley Block Capacity with Tripod stand 3 ton | 1. Standard Lift 15 m,,2. Throat Opening 23.2 mm,,3. Capacity 3 Ton,,4. Test Load 4.5 Ton ,,5. Length 182 mm,,6. Load Chain Dia 8 mm,,7. Number of Fall 2,,8. Effort Required to Lift Max Load 298 N,,9. Head Room 532 mm,,10. Width 174 mm,,11. Net Weight 26 kg ,,12. Items in Pack,,13. Tripod stand for chain pully block,,1 Piece,,14. Size 3 mtr,,15. Height 3 mtr,,16. Max Load 3 ton |
| 38 | Field Regulator 0-1000 ohm, 2Amp | 1. Standard Lift 15 m 2. Throat Opening 23.2 mm,,3. Capacity 3 Ton ,,4. Test Load 4.5 Ton ,,5. Length 182 mm ,,6. Load Chain Día 8 mm ,,7. Number of Fall 2 ,,8. Effort Required to Lift Max Load 298 N,,9. Head Room 532 mm ,,10. Width 174 mm ,,11. Net Weight 26 kg ,,12. Items in Pack ,,13. Tripod stand for chain pully block 1 Piece ,,,14. Size 3 mtr ,,15. Height 3 mtr ,,16. Max Load 3 ton ,,17. No Of Poles |
| 39 | Fire extinguishers Dry chemical 5 Kg | Specification :1) Capacity (In Kg) 05 KG, Type- ABC 2) IS Specification IS:2171 3) Jet Range (In Mtrs.) 4-5 4) Discharge Time (In secs.) 15-20 5)Min. Discharge Quantity 90% 6) Seal of Approval ISI |
| 40 | Crimping tool 25 mm | 1) Crimping Capacity : 6 mm to 25 mm,,2) High precision cast head for optimum compression.,,3)Ratchet control mechanism ensures precise controlled crimping cycle. ,,4) Emergency release lever for detachment of ratchet control during crimp cycle ,,5) Automatic opening of crimp tool on completion of crimp cycle.,,6)Ergonomically designed moulded plastic handles for reduction of operator fatigue.,,7) Material of : a)Jaw set: carbon steel grade SCM440.,,b)Frame: material steel grade S45C. ,,c) Handles : PP ,,8) Length: approx. 360mm. |
| 41 | Bar Magnet | Specification: 1)Size 100 X 6 X 20 mm 2) Material ALNICO 3) Shape Rectangular 4) Color Red, Blue with poles marking 5)Magnetic Output Medium Strength |
| 42 | Wheat Stone Bridge with galvonemeter and battery | Specification : 1)Broad, heavily plated brass strips should be mounted on polished hardwood base. 2) Terminals with 4 mm sockets should be provided 3) 4 SWG constantan wire should be stretched along the top of a meter scale in mm and cm 4)Should be supplied with JOCKEY 5) Dimensions: 1.13 mm X 80 mm X 50 mm (Approx.) 6)Two Gap 7) Should provided with Galvanometer & Battery |
| 43 | Rawal Tool Holder $ Bit No. 8,10,14, & 16 | Specification : 1) Length: 153mm±1 mm 2)Diameter: 20mm±0.2mm 3) Angle of point : 45Degree 4) Hardness: 30-35HRC 5) PointDiameter: 8mm, 10 mm, 14 mm, & 16mm. 6) Bit Material: Carbon Steel 7) Holder Material: MS Hexagonal Bar |
| 44 | Horse Shoe Magnet | 1) Size 50 mm, Horse Shoe shape 2) Magnet Material ALNICO 3) Magnetic Output Medium Strength 4)Thickness 6 mm 5) Color Red And Blue with Poles marking |
| 45 | Drill bit 6mm , 8mm , & 10 mm | 1) Compliance: Confirming to IS: 5101 – 1991 2) Drill Diameter "ØD": Ø6.0 mm, Ø8.0 mm, & Ø10.0 mm 3)Shank: Parallel 4) Material: HSS-M2 5)Finish: Milled / Ground 6) Hardness: 760 HV to 900 HV 7)Surface Treatment: Bright finish 8) Suitable Wooden/ Plastic/ Metal Box for storage |
| 46 | Demonstration Table 2.5x1.25x0.75 meter | 1)The overall size of the Work Bench shall be 2500mm (W) x 1250mm (D) X 750mm(H) 2) Components a)Main Leg Assembly: The main legs used in the entire system are fabricated by CO2 welded MS tube of section 50 mm x 50 mm x 5 mm thick,,2)Worktop 25 mm Thick laminated with PVC edge band. 3)Work top shall be made of 25mm thick & 1 mm thickformica laminated Ply wood |
| 47 | Primary Current Injection Set 220v,59Hz,1-Q,output | Display Type Digital Accuracy (%) Grater than 1.0Percent (F. S). Supply AC Control With the help of Manual Auto Transformer (according to customer demand) Current Source 10 to 200 Amp (according to customer demand). Condition New Measuring Isolated CT for current output, digital Voltmeter for voltage output Output Power 6.0V (according to customer demand). Up to 15kva Protection a) Overload b) Open circuit c) Over temp. Timer Control Circuit Modes 0.001 to 99999ms, Accuracy 0.1 Percent of reading Plus minus1ms Warranty 1 Year against manufacturing defects & Extended optional. Input voltage Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand Operation time 1min ON, 5mins OFF. External Current Meter range 100A to 200 A, Accuracy 1 Percent of reading, Plus minus 20 mA Timer Stop Input Voltage input (24 to 300 V, DC or peak AC), dry contact input, or removal of primary current |
| 48 | Hot wire Ammeter 0-15 Amps | Specification : 1) Type : Hot Wire ,,2) Range : 0 to 15 Amp. ,,3)Accuracy : Class 1.5 ,,,4) Size : Portable, Should be enclosed in Bakelite case ,,5) Can be measure AC / DC current |
| 49 | Vaccume gauge 0 to 760 mm of Hg. | 1. Inches of mercury (Hg) on a scale of 0 to 30, and the metric equivalent. Size = 4” Dial Metal Body ,,2. Rubber hose pipe to connect combustion chamber,,3. Should be supplied in Wooden / Plastic Box with proper cushioning |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
