Annual Rate Contract For Safety Items-Safety Helmet With 6 Points Ad Long Description: Specification revised as per email from Mr Yogesh J. Nakhare dated: 17/08/2016. Email attached with item masterSpecification for Industrial Safety HelmetGENERAL REQUIREMENTSSafety helmet shall have 6 point adjustable ratchet type head harness, sweat band and nape Strap. Head harness, Sweat Band and Chin strap are separately available as sparesHelmet can be easily fixed to other safety accessories like ear defenders, face shield, welding visors etc. should be able to use with other PPE¿sHead harness will be made up of combination of HDPE and Nylon material.Helmet Weight shall be less than 350gms.Ergonomically designed ratchet type Head harness adjustable from 57cm to 60 cmSpecially designed Brim Design optimal for better upward visibility and for side protectionHelmet with extended crown for extra overhead protection.Special Ratchet mechanism for smoother operation.Comfort in wearing shall be one of the important criteria.Safety helmet shall be molded out of High impact, heat and chemical resistant HDPE in white, Red and Green colourMARKING AND LABELLINGHPCL Colour logo to be printed / screen Printed on the front side with true colors as approved by HPCL.Embossing on the inner side of the helmet at visible location for month & year of manufacturing, MOC, Certification, Make/ Manufacturer, Batch number.ANSI and BIS approval will be marked on the inside of the shell (IS 2925 marking on inner side of helmet)Comfort in wearing COMPLIANCE & APPROVALSHelmet shall be tested for shock absorption resistance, penetration resistance, flammability, electric resistance, water absorption, heat resistance. Copy of such performance test certificate shall be submitted along with supply of material.May be worn in reverse donning position and ANSI approved.Electrical resistance tested at 20000V.During each supply copies of relevant certificate from the reputed institutes/testing laboratories (ANSI / EN / IS / CLI / CE / Etc.) for test results on Impact Resistance, refractive Index, etc. to be provided.WARRANTYThe warranty period for the supplied Safety Helmet shall be for a minimum period of one year for any manufacturing defects, Face Shield for safety helmets Long Description: Specification revised as per email from Mr Yogesh Nakhare dated: 17/08/2016. Email attached with item master.SPECIFICATION FOR FACE SHEILDS FOR SAFETY HELMETS:==================================================1.APPLICATIONTo provide protection of eyes/ face against hazards from Splash of Chemicals / Liquids and Flying particles for use in Oil Refinery environment.This Face shield would be used by all Refinery employees as part of specific Personal Protective Equipment on the Safety Hemet along with other required Personal Protective Equipment¿s while they are Handling Chemicals, Irritating liquids and exposed to hazards from flying objects2. GENERAL REQUIREMENTS2.1Construction :Protective one piece Visor fitted with slot fix arrangement.Should be able to use with other PPEs and can be comfortably worn on conventional spectaclesShould be able to fit on the existing standardized helmet (Leslico - Industrial Safety helmet).2.2 Visor :High impact, Chemical resistant made of transparent acrylic. Excellent optical clarity having no power in the visor.Distortion free sight2.3 Fore head mounting :Black colour made of chemical resistant PVC plastic and fitted with Slot fix arrangement suitable for mounting on existing standardized Industrial Safety helmet.2.4 Workmanship finishingGood finish and workmanship.Comfort in wearing shall be one of the important criteria.2.5 Size:6x14 Can be worn comfortably with natural fit over numbered spectacles.Safety helmet shall be molded out of High impact, heat and chemical resistant HDPE in white, Red and Green colourSafety helmet shall have 6 point adjustable ratchet type head harness, sweat band and nape Strap. Head harness, Sweat Band and Chin strap are separately available as sparesHelmet can be easily fixed to other safety accessories like ear defenders, face shield, welding visors etc. should be able to use with other PPE¿sHead harness will be made up of combination of HDPE and Nylon material.Helmet Weight shall be less than 350gms.Ergonomically designed ratchet type Head harness adjustable from 57cm to 60 cmSpecially designed Brim Design optimal for better upward visibility and for side protectionHelmet with extended crown for extra overhead protection.Special Ratchet mechanism for smoother operation.3. Marking and labellingHPCL Colour logo to be printed on the front side with true colors.Embossing on the inner side of the helmet at visible location for month & year of manufacturing, MOC, Certification, Make/ Manufacturer, Batch number.ANSI and BIS approval will be marked on the inside of the shellGood Finish and workmanshipComfort in wearing 4. COMPLIANCE & APPROVALSHelmet shall be tested for shock absorption resistance, penetration resistance, flammability, electric resistance, water absorption, heat resistance. Copy of such performance test certificate shall be submitted along with supply of material.May be worn in reverse donning position and ANSI approved.Electrical resistance tested at 20000V.During each supply copies of relevant certificate from the reputed institutes/testing laboratories (ANSI / EN / IS / CLI / CE / Etc.) for test results on Impact Resistance, refractive Index, etc. to be provided.5. WARRANTYThe warranty period for the supplied Safety Helmet shall be for a minimum period of one year for any manufacturing defects, Safety Belt, Harness Cotton We, Kelvar Hand Gloves Long Description: Kelvar Hand Gloves :================Specification :==========- The Glove should have non woven felt Insulation to Protect back of hands against radiant heat and intermittent back of hand contact with Hot objects.- The Glove should offer full-length heat barrier, Protect the worker, while two-piece construction should eliminate out seams to provide better finger comfort, dexterity, and flexibility.- The glove should offer protection against snags, punctures, abrasion and cuts, while also enhancing dry grip.- The glove should offer protection level minimum to 250 Deg Centigrade.- The Glove should offer excellent grip on dry and oily surfaces.- The length of the glove should not be less than 330 MM, Chemical Goggles, To Protect A Long Description: Specification revised as per email from Mr Yogesh Nakhare dated: 17/08/2016. Email attached with item master.D. Specifications Chemical Goggles (IS-7524-1980)Protects from chemical splashesPolycarbonate LensSoft PVC crystal frame with a wide support area all around the face to enhance comfortSpecific channel on the side of the frame to accommodate the temple of prescription eyewear Wide nylon elastic strap (25mm) which is easily adjustable due to buckle systemPivoting strap attachment mechanismMeets the basic safety requirements under article10 of the European community directive 89/686/EEC and is thus CE marked/ CLI approval (ANSI / EN / IS / CLI / CE / Etc.)Indirect ventilation system to prevent fog, liquids and dustAnti-fog-Anti Scratch Coating option is also availableSafety Goggles, panoramic type having soft PVC body one piece shatter resistant acrylic visor with 4 nos.indirect vent knobs and elastic head band
