Bids Are Invited For Wooden Podium For Class Rooms / Laboratory - Supplying Of Podium Of Particle Board Cledeal With Good Quality Of Benchmark As Per Dimension Given In Drawing Size :- , Reception Table - First Impression Reception Table 2 Arc Decorative, bidar-Karnataka

Bids Are Invited For Wooden Podium For Class Rooms / Laboratory - Supplying Of Podium Of Particle Board Cledeal With Good Quality Of Benchmark As Per Dimension Given In Drawing Size :- , Reception Table - First Impression Reception Table 2 Arc Decorative Laminate Top :-Top Shall Be Laminate With Clean Matt Pu Finish 18 Mm Thick , Inside Radius - 700 Mm , Outside Radius - 1350 Mm And Depth - 650 Mm . Cork Shall Be 18 Mm Thick Of Rubber . Glass Shall Be Frostered 10 Mm Thick Diamond Cut Finishing On Edges , Inside Radius Shall Be - 1202.5 Mm , Otside Radius - 1402.5 Mm And Depth - 200 Mm . The Modesty Panel Shall Be Ms Perforated Sheet Below Worksurface : 0.8 Mm ( Thick ) X 665 Mm ( Height ) X 1345 Mm ( Flat Length ) . Above Worksurface : 0.8 Mm ( Thick ) X 260 Mm ( Height ) X 1345 Mm ( Flat Length ) . The Legs Shall Be Of Ms Tube 1.6 Mm Thick Diameter 50.8 Mm And Height 604 Mm , Offica Table - Size:H: 990 W: 1830 D: 760 All In Mm : Table - T 8 Size Shall Be1199widthx 590 Depthx 735Height . The Top Panels Shall Be Made From 18 + / - 0.5 Mm Thick Pre - Laminated Boards As Per With 2 Mm Thick Pvc Edge Banding On All Sides . Understructure Shall Be Made From 0.9 Mm + / - 0.09 Mm Thick Powder Coated 50 Microns ( + / -10 ) Crca Ms. Tubular Frame Shall Be Dia. 25.4 + / - 0.3 Mm X 1.2 + / - 0.096 Mm Thick Ms Erw Tube .Modesty Panel Shall Be Made From 1.0 + / - 0.09 Mm Thick Powder Coated 50 Microns ( + / - 10 ) . The Storage Shall Be Having Shell 0.5 + / - 0.07 Mm Thick Crca Ms Plus Drawer Tray 0.5 + / - 0.07 Mmthick Crca Ms Plus Drawer Front 0.8 + / - 0.1 Mm Thick Crca Ms . Also There Should Be 10 Lever Cam Lock Plus Handles Built In Plastic. , Professor Table With 1 Executive Chair + 2 Visitors Chairs Godrej Aristo Table - Godrej Aristo Table W: 1350 D: 600 H: 7500 All In Mm :Work Surface-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management.Modesty Panel-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Under-Structure-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security. , Godrej Pulse Hb Chair - Seat Size: 47.0 Cm. ( W ) X 51.5 Cm. ( D ) Back Size :45.0 Cm. ( W ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =55+ / -2 Kg / M³ And Hardness 16 ± 2 Kgffor 25% Compression. Armrests : The Armrests Have An Up-Down Adjustment Of 8.5 ± 0.5Cm Which Should Beprovided In Armrest Structure. Armrest Top Has An Integrated Layer Of Thermoplastic Elastomer ( Tpe ) . Lumbar Support Assembly: The Lumbar Support Consshould Be Ts Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pad. Lumbar Pad Has An Adjustment Of 8.0 ± 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features.• 360° Revolving Type.• Single Point Control.• Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.• Tilt Tension Adjustment.• 4-Position Locking With Anti-Shock Feature.• Seat / Back Tilting Ratio Of 1:2.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3 Cm.Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch-Center Dia Should Beø66.1 ± 0.5 Cm ( 76.1 ± 1.0 Cm. With Castors ) .Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon.Seat Size: 47.0 Cm. ( W ) X 51.5 Cm. ( D ) Back Size: 45.0 Cm. ( W ) X 65.3 Cm. ( H ) The Neckrest Assembly Consshould Be T Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. Neckrest Should Befixed To Back Assembly Through Neckrest Connector. Neckrest Assembly Has Height Adjustment Of 4.2 ± 0.5 Cm And Rotation Adjustment Of Overall 76°± 2°. The Complete Neckrest Assembly Should Beretro Fit To The Main Chair. , Godrej Oxbo Vist Chair - Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressedplywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Assembly: The Back Asembly. Should Bemade Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm. ( W ) X 60.5Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated ( Dft 40-60.Microns ) Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. Overall Dimensions Of Chair-Seat Height - 46.5Cm.Height - 93.5Cm.Width & Depth Of Chair As Measured From Pedestal - Width-61.0 Cm And Depth-64.5 Cm. Roduct Is Greenguard Certificate , Assistant Professor Table With 1 Executive Chair + 2 Visitors Chairs - Size:W: 1200 D: 600 H: 7500 All In Mm : `Work Surface-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management.Modesty Panel-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Under-Structure-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security. , Godrej Oxbo Hb Chair - Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressedplywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Assembly: The Back Asembly. Should Bemade Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm ( W ) X 70.5 Cm ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features:• 360° Revolving Type.• 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. Tilt Tension Adjustment..Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm.Telescopic Bellow Assy: The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors. ) Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylonoverall Dimensions Of Chairseat Height - Min 43.3 To Max 54.3Cm.Height - Min 99.5 To Max 110.5Cm.Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Godrej Oxbo Visit Chair - Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressedplywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Assembly: The Back Asembly. Should Bemade Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm. ( W ) X 60.5Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated ( Dft 40-60.Microns ) Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. Overall Dimensions Of Chair-Seat Height - 46.5Cm.Height - 93.5Cm.Width & Depth Of Chair As Measured From Pedestal - Width-61.0 Cm And Depth-64.5 Cm. , 4 Seater Class Room Desk With Drawer - 4 Seater Class Room Desk With Drawerscholar:1800 W Desk Cum Bench Size Shall Be 1800 Width Mm X 895 Depth Mm X 750 Height Mm. Top & Seat Panel Shall Be 18 Mm Thick Pl8 ( Pre-Laminated Board ) With Back Panel Shall Be 18 Mm Thick Plt. The Under Structure Shall Be Ms Sq Tubes Of Size 25.4 Mm X 1.2 Mm Plus There Shall Also Be A Storage Shelf. Also The Seating Capacity Shall Be 3. , Lab Revolving Stool - Godrej Rtevolving Stool : Seat Assembly: The Seat Should Bemade Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Should Be .Upholstered With Replaceable Synthetic Leather Covers.Seat Size: Diameter 40.0 Cm Adjustments: 360° Revolving Type High Resilience ( Hr ) Polyurethane Foam:The_Hr.Polyurethane Foam Should Be _Moulded With Density = 45 +1-2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Height Adjustment: The Manual Height Adjustment Should Bevery Easy To Operate With A Help Of A Knob.. It Can Be Easily Locked At The Most Comfortable Position Pedestal Assembly: The Five-Prong Pedestal Should Befabricated From 0.2 ± 0.02 Cm :Thick Hr Sheet. ( Should Be:. Dd 1079 / Hr ) , Powder Coated ( Dft 40-60 Microns ) And Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors. Thepedestal-Should Be55.0±0.5Cm Pitch-Circle-Diameter- ( 65.0±-1, 0Cm-With-Castors ) .-Circular-Foot-Ring Of 052.0±0.2Cm Made Up Of 01.9±0.2 X 0.12±0.0096Cm Thk Ms Erw Tube For Foot Support In High-Base Stool Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon , Desklet Chairs With Writing Pad - The Seat And Back Are Made Uo Injection Moulded High Impact Strenght Polypropylene Polymer Compound With Indoor Graade Uv Resistance. The Powder Coated ( Dft50+ Microns ) Weled Tubular Frame Is Made From 2.22 + 0.03 Cm X 0.16+ / - 0.0128Cm And 3.5+ / - 0.03 Cmx1.5+ / -0.03 Cm X 0.16 + / - 0.0128 Cm M.S.E.R.W Tube.The Powder Coated Weled Beam M.S. Structure Is Made From 5.08+ / -0.03Cm X0.16X + / - 0.0128 Cm.The Shoes Are Made Of High Impact Strenght Polypropylene Polymer Compond With Indoor Grad Uv Resistance And Pressed Fitted With Tubularfram. The Armrest Made Of High Impact Strenght Polypropylenne Polymer Compound With Indoor Grad Uv Resistance And Assembly Over The Tubular Frame. The L Shape Desket Is Made Of 1.8+ / - 0.05Cm Thk . Pre - Laminated Perticleboard With 0.2+ / - 0.05 Cm Thk Injection Polypropylene Polymer All Aroundfront & Back ( Outher Dimension - 31.5+ / - ( W ) X 47.0+ / - 0.1 Cm ( D ) ) An Upholstry Cover Be Retro Fitted On Seat And Back . The Seat Cover Is Made Fromhigh Abrasion Resistance With Fabric With Foam Laminated And 2.5Cm Pu Foam Insert. The Back Cover Is Made From High Abrasion Resistance Fabric With Foam Lamination And 0.1 Cm Pu Foam .Size : ( W ) 57.5Cm* ( D ) 67.8Cm* ( H ) 84.5Cm* ( Seat H ) 45.0 Cmseat Size 52.5Cm ( W ) *53.2 Cm ( D ) Back Size 51.6 Cm ( W ) *40.5 Cm ( H ) , Office Almirah - Godrej Storwell Size: H: 990 W: 1830 D: 760 All In Mm Storwel Plain Shall Have An Overall Size Of916mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available , Training Hall Table - Insight 1800 W Size Shall Be 1800 Width Mm X 900 Depth Mm X 740 Height Mm, The Top Shall Be 25 Mm Thick Plb With 2 Mm Thick Pvc Edge Beading Plus The Understructure Shall Be Having C Frames 1.6 Mm Thick Ms Supporting The Top. The Legs Shall Be Of Dia: 38.1 X1.6 Mm Thick Ms Erw Tube. , File Racks - Godrej Steel Book Rack : Overall Dimensions Of Single Sidedsteel Book Rack Base Unit Shall Be 900Mm ( W ) X316mm ( D ) X1850mm ( H ) . Rigid Knockdown Construction , Material Used Shall Be Crca 0.8 Mm Thick . The Stackability Shall Be Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel . Number Of Adjustable Shelf Shall Be Five With Six Loading Levels . Uniformly Distributed Load Capacity Per Each Shelf Is 80 Kg Maximum . Shelf Back Stiffenerat The Rear End Of The Shelves Shall Be Provided . These Are To Support Books On The Rear Side . Label Holder & Range Indicator On Each Main Unit For Inserting Labels . , Cot For Students Hostels - Godrej Eq Cot :W: 97.3 L:205 H: 72.1 All In Mm Eq Bed With Ply Arrangement With Headboard , Students Study Table With Chair T-104 - Table - T 104 Size Shall Be1665widthx 900 Depthx 750 Height . The Top Panels Shall Be Made From 25 + / - 0.5 Mm Thick Pre - Laminated Boards As Per With 2 Mm Thick Pvc Edge Banding On All Sides . Understructure Shall Be Made From 0.9 Mm + / - 0.09 Mm Thick Powder Coated 50 Microns ( + / -10 ) Crca Ms. Tubular Frame Shall Besq. 25.4 + / - 0.3 Mm X 1.2 + / - 0.096 Mm Thick Ms Erw Tube .Modesty Panel Shall Be Made From 1.0 + / - 0.09 Mm Thick Powder Coated 50 Microns ( + / - 10 ) . The Storage Shall Be Having Shell 0.5 + / - 0.07 Mm Thick Crca Ms Plus Drawer Tray 0.5 + / - 0.07 Mmthick Crca Ms Plus Drawer Front 0.8 + / - 0.1 Mm Thick Crca Ms . Also There Should Be 10 Lever Cam Lock Plus Handles Built In Plastic. Total Quantity : 1

Refer document

INR 14.58 Lakhs /-