Bids Are Invited For Wooden Podium For Class Rooms / Laboratory - Supplying Of Podium Of Particle Board Cledeal With Good Quality Of Benchmark As Per Dimension Given In Drawing , Reception Table - First Impression Reception Table 2 Arc Decorative Laminat, Nandinagar-Karnataka
TDR : 30296240
Tender Notice
BOQ
Expired
Nandinagar
Karnataka
Bids Are Invited For Wooden Podium For Class Rooms / Laboratory - Supplying Of Podium Of Particle Board Cledeal With Good Quality Of Benchmark As Per Dimension Given In Drawing , Reception Table - First Impression Reception Table 2 Arc Decorative Laminat
Supplying of Podium of particle board cledeal with good quality of benchmark as per dimension given in drawing
2
Reception Table
First Impression Reception Table 2 Arc Decorative Laminate Top :-Top shall be Laminate with clean Matt PU finish 18 mm thick , inside radius - 700 mm , outside radius - 1350 mm and depth - 650 mm . Cork shall be 18 mm thick of rubber . Glass shall be Frostered 10 mm thick diamond cut finishing on edges , inside radius shall be - 1202.5 mm , otside radius - 1402.5 mm and depth - 200 mm . The Modesty Panel shall be MS Perforated sheet below worksurface : 0.8 mm (thick) x 665 mm ( height) x 1345 mm (flat length ) . Above Worksurface : 0.8 mm (thick ) x 260 mm (height)x 1345 mm (flat length) . The legs shall be of MS tube 1.6 mm thick diameter 50.8 mm and height 604 mm
3
Offica Table
Size: H: 990 W: 1830 D: 760 all in mm Table - T 8 size shall be1199Widthx 590 Depthx 735Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.
4
Professor Table with 1 Executive chair + 2 Visitors Chairs Godrej Aristo Table
Size: W: 1350 D: 600 H: 7500 all in mm `Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge Door Storage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security.
5
Godrej Pulse HB Chair
seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgffor 25% compression. armrests : the armrests have an up-down adjustment of 8.5 ± 0.5cm which should beprovided in armrest structure. armrest top has an integrated layer of thermoplastic elastomer (tpe). lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. front pivot synchro mechanism: the adjustable tilting mechanism should bedesigned with the following features.• 360° revolving type.• single point control.• front-pivot for tilt with feet resting on ground ensuring more comfort.• tilt tension adjustment.• 4-position locking with anti-shock feature.• seat/back tilting ratio of 1:2.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.pedestal assembly: the pedestal should beinjection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch-center dia should beØ66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors).twin wheel castors:the twin wheel castors should beinjection moulded in black nylon.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D)BACK SIZE: 45.0 cm. (W) x 65.3 cm. (H)The Neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. Neckrest should befixed to Back Assembly through Neckrest connector. Neckrest assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. The complete neckrest assembly should beretro fit to the main chair.
6
Assistant Professor Table with 1 Executive chair + 2 Visitors Chairs
Size: W: 1200 D: 600 H: 7500 all in mm `Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge Door Storage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security.
7
Godrej Oxbo HB Chair
seat assembly: the seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressedplywood, upholstered with fabric upholstery covers and moulded polyurethane foam.seat size: 47.0 cm. (w) x 48.0 cm. (d)back assembly: the back asembly. should bemade of powder coated (oft 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back should beupholstered using double layer spacer mesh fabric with high tenacity yarn.back size : 46.5 cm (w) x 70.5 cm (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression.armrests: the one-piece armrests should beinjection moulded from black co-polymer polypropylene. centre-tilt mechanism: the mechashould be m should bedesigned with the following features:• 360° revolving type.• 17° ±2° maximum tilt on pivot at centre • upright position locking. tilt tension adjustment..pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.telescopic bellow assy: the bellow should be3 piece telescopic type and injection moulded in black polypropylene.pedestal assembly: the pedestal should beinjection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. the pedestal should be66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) twin wheel castors: the twin wheel castors should beinjection moulded in black nylonOverall Dimensions of ChairSeat Height - min 43.3 to max 54.3cm.Height - min 99.5 to max 110.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
