Dismantling of old interlocking tiles pavement including stacking of serviceable material and disposal of unserviceable material within lead of 50m as per direction of engineer in charge.
2
Cartage of silt, sludge kankar and other disposable organic material etc. all complete with labor T&P including cartage of 8 km.
3
M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work.
4
12MM Thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not including 80mm in girth and finished even and smooth. No extra for missing any additive. 1 cement : 4 Coarse Sand.
5
Providing and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone) aggregate (20 mm nominal size) and cutting complete including cost of form work. In foundation and floors.
6
Providing, Laying spreading and compacting 22.4-53 mm stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 whose steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying the brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to be required density.
7
Supply and laying stone dust etc. all complete.
8
Supply & fixing of pre-cast M-30 cement concrete RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30. (tiles shape decided by Engineer-in-charge)
9
Supply & fixing of pre-cast M-30 cement concrete Coloured RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30 (tiles shape decided by Engineer-in-charge).
10
Supply and fixing of black granite stone board and approved standard matter with brick work, plaster & paint etc. all complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.