Estimate For The Cost Of Construction Of Information Center Cum Eco Shop Cum Cafeteria At Peermade In Azhutha Range During 2021-22 (First Phase). Estimate For The Cost Of Construction Of Information Center Cum Eco Shop Cum Cafeteria At Peermade In Azhutha
Tender Value
27.61 Lakhs
Estimated cost
Bid Submission
22 Dec 2021
0 days left
EMD
41500
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Peermade in Azhutha Range → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For The Cost Of Construction Of Information Center Cum Eco Shop Cum Cafeteria At Peermade In Azhutha Range During 2021-22 (First Phase). Estimate For The Cost Of Construction Of Information Center Cum Eco Shop Cum Cafeteria At Peermade In Azhutha Range During 2021-22 (First Phase).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavatedearth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds ofsoil |
| 2 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soilsas directed, within a lead of 50 m.Hard rock (blasting prohibited) |
| 3 | Providing and fixing 16 mm M.S rod for dowel bars 1.50m length fixing in 60 cm deep holes fighting withcement grant etc including cost of M.S road labour for drilling holes and cement grouted |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarsesand :3 graded stone aggregate 20 mm nominal size |
| 6 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases ofcolumns, etc for mass concrete |
| 7 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,girders bressumers and cantilevers |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five levelexcluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 9 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) includingattached pilasters, butteresses, plinth and string courses etc. |
| 10 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers,Abutments, Posts and Struts |
| 11 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level,including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarsesand) |
| 12 | Dry rubble work with hard stone in foundation and plinth including levelling up with cement concrete1:6:12 (PWD DATA BOOK SL NO -55) - hiselling in hard rock( where blasting is prohibited ) measured inthe solid, dep |
| 13 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1cement :6 coarse sand) etc complete |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floorfive level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,landings, balconies and access platform |
| 16 | Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings )except spiral - staircases) |
| 17 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelCold twisted bars |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately).Sal wood |
| 19 | Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows andclerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size withnecessery screws, excluding panelling which will be paid for separately, all complete as per direction ofEngineer - in-charge.Second class teak woodProviding and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size withnecessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection ofEngineer-in-charge. (Note:- Butt hinges and necessary screws shallbe paid separately)Second class teakwood35 mm thick shutters |
| 20 | Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick floatglass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessaryscrews.Second class teak wood35 mm thick |
| 21 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVCfoam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mmwidth & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mmx 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchorfastener as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 22 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles &rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shallhave one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screwholding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm,painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding(Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styleswith the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm completeas per manufacturer\"s specifications and direction of Engineer -in-charge.Non decorative finish |
| 23 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nutsand wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 24 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square orround bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ woodenframes with rawl plugs screws etc |
| 25 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlockedtogether through their entire length and jointed together at the end by end locks, mounted on speciallydesigned pipe shaft with brackets, side guides and arrangements for inside and outside locking with pushand pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wiresprings manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 26 | Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape andsection with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators andcomposite units. |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 28 | Providing and laying shingles on FRP sheet od approved pattern on steel frames or wood frame workusing the shingles using best quality available from market |
| 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation asapproved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet andpolyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum toavoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. |
| 30 | 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand) |
| 31 | 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) |
| 32 | 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 34 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of requiredshade on new work, over and including water thinnable priming coat to give an even shade: |
| 35 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Twoor more coats on new work |
| 36 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling ofapproved municipal design complete, including painting of fittings and brackets, cutting and making goodthe walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps |
| 38 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with whitePVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unionsand clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and othercouplings in C.P. brass, including painting of fittings and cutting and making good the walls and floorswherever required:Range of two half stall urinals with 5 litre PVC. automatic flushing cistern |
| 39 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets andstainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallswherever required:Kitchen sink with drain board510x1040 mm bowl depth 200 mm |
| 40 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape450 mm dia |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semirigid pipe32 mm dia |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 43 | LS Amount for other Sanatory items & Watter supply arrangements |
| 44 | GST |
| 45 | Unforseen |
AI Tender Summary
Tender Timeline
Dec 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender