|
| 1 | Taking up or down steel tubing and connections, 25 or 32 mm bore incl cleaning and removal to store complete all as specified and as directed. |
| 2 | Taking up or down steel tubing and connections, 20 mm bore incl cleaning and removal to store complete all as specified and as directed. |
| 3 | S&F 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 4 | S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 5 | S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 6 | S&F 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 7 | S&F in repair 15mm bore chromium plated bib taps long body, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes including taking down of old items complete all as specified and as directed. |
| 8 | S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15mm bore pipe complete all as specified and as directed. |
| 9 | S&F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 10 | S&F in repair 125mm size brass chromium plated shower rose complete all as specified and as directed. |
| 11 | S&F in repair health faucet CP (hand shower type) with shut off valve (thumb or push button type)to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted padestal for hanging faucet including taking down of old one complete all as specified and as directed. |
| 12 | S&F in repair 15mm bore stop valves chromium plated cast copper alloy (long shank, fancy type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) complete all as specified and as directed. |
| 13 | S&F in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed. |
| 14 | S&F 32mm dia PVC flexible waste pipe for urinals/WHB/sink complete all as specified and as directed. |
| 15 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 16 | Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed. |
| 17 | M&Lfor coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | M&L for Glazed ceramic coloured tiles 350x250x7mm / 450x350x 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed. |
| 19 | S&F in repair chromium plated soap tray fixed with CP brass screws complete all as specified and as directed. |
| 20 | S&F in repair vitreous China wash basin, coloured, flat back 550x400mm including pillar tap and waste coupling CP,fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. |
| 21 | S & F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 22 | S&F in repair vitreous china, wash down water closet(EWC), coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed. |
| 23 | S&F Vitreous china squatting pan \"Orissa pattern size 630x450 white with integral foot rest (excluding flushing cistern and flush pipe) Make Cera or equivalent fixed in repair complete all as specified and as directed. |
| 24 | S&F in repair 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail complete all as specified and as directed. |
| 25 | S&F in repairs bevelled edge mirror 600x450mm, selected quality glass mounted on 6mm thick PVC/AC building board/commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and as directed. |
| 26 | Dismantling the existing water tank and S&FRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 500 litres complete all as specified and as directed. |
| 27 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in gola junction of wall and floor or for settings floor trap/ ‘P’ trap in position and PCC padding in floor complete(Work in foul condition as in shaft) complete all as specified and as directed. |
| 28 | S&F in repair Brass chromium plated towel ring complete all as specified and as directed. |
| 29 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/ dense soil complete all as specified and as directed. |
| 30 | M&L for Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 31 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similiar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 32 | S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A) including necessary cutting in wall complete all as specified and as directed. |
| 33 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 34 | S&F MS Anchor fasteners of size 12mm dia. and 100mm length for fixing the plates to the wall surface complete all as specified and as directed. Make:- Hilti or Equivalent as approved by GE. |
| 35 | M&L for rendering 15mm thick on stone masonry surfacesin cement mortar 1:4 and finish the surface even and smooth complete all as specified and as directed. |
| 36 | M&L for applying two coats of OBD emulsion over a coat of primer on newly plastered surface including preparation complete all as specified and as directed. |
| 37 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed. |
| 38 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard / dense soil complete all as specified and as directed. |
| 39 | M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken boulders or stones complete all as specified and as directed. |
| 40 | M&L for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 100 mm thick as in sub base complete all as specified and as directed. |
| 41 | M&L 100 mm thick cement concrete 1:2:4 type B-1,(using 20mm graded granite stone aggregate) as in hard standing and make impressions while concrete is green complete all as specified and as directed. |
| 42 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound - Grade \"A\" complete all as specified and as directed. |
| 43 | M&L for PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation complete all as specified and as directed. |
| 44 | M&L for Pre-cast cement concrete block masonry with solid blocks,type C1, 1:3:6 using 20 mm graded aggregateexc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed. |
| 45 | M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate as in coping complete all as specified and as directed. |
| 46 | M&L for precast cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) in landings, preforated cover slabs (for man holes, drain etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed. |
| 47 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 48 | M&L for rendering 15 mm thick in CM 1:4 onfair face of brickwork/ concrete surfacesfinished even and smooth without using extra cement complete all as specified and as directed. |
| 49 | Removing excavated material (soil) exc. 1.5 km m but n exc.5.0 km and depositing where directed complete all as specified and as directed. |
| 50 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 51 | S&F PVC (SWR) bend with door suitable for 75 mm bore pipes complete all as specified and as directed. |
| 52 | S&F PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 53 | S&F of CPVC(Single T) equal or unequal complete all as specified and as directed. |
| 54 | S&F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed. |
