Construction Of Co 70 Kld Stp At Bsf Campus Dantiwada Of 109 Bn Bsf Under Shq Bsf Gandhinagar Sh Providing And Fixing Electrolyzer Based 120 Kld Stp Co 70 Kld Stp At Bsf Campus Dantiwada Of 109 Bn Bsf Under Shq Bsf Gandhinagar Sh Providing And Fixing Ele
Tender Value
39.82 Lakhs
Estimated cost
Bid Submission
27 Dec 2021
0 days left
EMD
79646
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dantiwada → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Co 70 Kld Stp At Bsf Campus Dantiwada Of 109 Bn Bsf Under Shq Bsf Gandhinagar Sh Providing And Fixing Electrolyzer Based 120 Kld Stp Co 70 Kld Stp At Bsf Campus Dantiwada Of 109 Bn Bsf Under Shq Bsf Gandhinagar Sh Providing And Fixing Electrolyzer Based 120 Kld Stp Partb
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thicknesswith zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 14 | BAR SCREEN Providing and fixing bar screen dimension 1.5 m long and 1.0 m width MS Square bar suitable for filtering/Seperating 12 mm and above size solids including painting with epoxy paints |
| 15 | SEWAGE TRANSFER PUMP Supply, installation, testing & commissioning of Horizontal Centrifugal / Vertical Monoblock sewage pumps complete with all accessories, motor of required capacity. The pumps will be complete with Delivery header with, pressure gauge on delivery line with isolation level controller (with wiring) to control the level of Sump automatically . Pumps & Other associated works & accessories, shall have following duty:Flow & Head - 15 m3/hr at 14 mtr headType- Centrifugal self priming monoblock mud pumpset Drive -1.5 KW/2 HP Three Phase ,2800 RPM Pipe- Size 40mm * 40mm Solid - Passage 8.5 mm Make KIRLOSKAR PUMPS (ISI) or its equivalent as approoved by Engineer incharge |
| 16 | Electrolyzer CELL Providing Electrolyzer cell suitable for 120 KLPD SWTP at site, installation and commissioning of equipments/ electricals/ piping etc complete as described in specifications including obtaining the statutory approvals from the concern authorities, operation and maintenance with own staff and consumables as specified in the technical specifications of MOC- PP Simona Size (LWH) mm- 2500mm*1250mm*950mm Volume- 3.0m³ LTR Sheet -Thickness 12 mm N Number Of Parts - 04 Part |
| 17 | Electrod plates Providing of Aluminium HE13 grade ,610X610X6mm size each ,14 nos Electrode platesfor Electro coagulation suitable for 120 KLPD SWTP at site, installation and commissioning of equipments/ electricals/ piping etc complete as described in specifications including obtaining the statutory approvals from the concern authorities, operation and maintenance with own staff and consumables as specified in the technical specifications . |
| 18 | Trappist Dosing Chemical Providing of dosing pump of rating 5A, 6 LPH flow rate with dosing tank of capacity 100 LTR volume plastic house hold drum including Trappist of organic flocculant for separation and precipition of various type of suspected sludge (Dose 200ml Per 100Ltr Water) suitable for 120 KLPD SWTP at site, installation and commissioning of equipments/ electricals/ piping etc complete as described in specifications including obtaining the statutory approvals from the concern authorities, operation and maintenance with own staff and consumables as specified in the technical specifications . |
| 19 | Lamella Clarifier Providing Lamella Clarifier all equipment /machinary suitable for 120 KLPD SWTP at site installation and commissioning of equipments/ electricals/ piping etc complete as described in specifications including obtaining the statutory approvals from the concern authorities, operation and maintenance with own staff and consumables as specified in the technical specifications.MOC- MS Sheet 4MM Thickness, Tube Settler Media (square) Size (LWH) mm- 2000mm * 2000mm * 2400mm ( With Leg ) Volume- 7.2m³ LTR |
| 20 | Intermediate Tank Providing of PVC plastic storage tank (Doublr layer) as Intermediate Tank , 5000 Ltr. capacity , size 1950mm Dia x 1950 Height at site ,installation and commissioning of equipments/ electricals/ piping etc complete as described in specifications including obtaining the statutory approvals from the concern authorities, operation and maintenance with own staff and consumables as specified in the technical specifications.Make National Make (ISI) |
| 21 | FILTER FEED PUMPSSupply, installation, testing and commissioning of centrifugal selfpriming filter feed pump & other associated works & accessories & as per manufacture specifications below to transfer treated sewage from filter feed pump sump to the activated glass media filter Flow & Head -19.8 m3/hr at 32 mtr head Type- non-clogg, mono-block, SS Body Drive -4 KW/ 5.5 HP Three Phase ,2800 RPM Pipe -Size40mm X 32mm Make KIRLOSKAR PUMPS (ISI) or its equivalent as approoved by engineer incharge |
| 22 | ACTIVATED GLASS MEDIA FILTER Supply, installation, testing & commissioning of activated glass media filter to remove suspended particles from settled water in filter feed pump sump.MOC-MS Epoxy Type - Vertical pressure vessels Pressure -Max. 3.5 kg/sq.cm.Min. 1.0 kg/sq.cm.Flow -13000 LPH Dimension - Dia 1100 mm x 1500 mm Features- Dished ends, bell mouth typePiping- PVC - 80 Sch. Valve -40 NB Multi-port type (SMF) Fittings- Pressure gauge of 2.5 inch dia dial ranging from 0 to 7 kg at inlet and outlet of pressure vessels, Sampling ports at inlet and outlet of pressure vessels,Backwash arrangements, Media withdrawal pad Media -Glass Media - Less Than 5 Micron Filtering Capacity |
| 23 | ACTIVATED CARBON FILTER Supply, installation, testing and commissioning of Activated Carbonfilter, & other associated works & accessories etc.complete. To remove odour and colour producing substance from water in the filter feed pump sump Location- Outlet of Glass Media Filter.MOC- MS Epoxy Type -Vertical pressure vessels Pressure - Max. 3.5 kg/sq.cm. Min. 1.0 kg/sq.cm. Flow - 13000 LPH Dimension- Dia 1100 mm x 1500 mm Features - Dished ends, bell mouth type Piping -PVC - 80 Sch Piping -PVC - 80 Sch.. Valve -40 NBMulti-port type (SMF) Media -Base Supporting media in Bottom and Granular ACTIVATED CARBON of 1100 Iodine Value. |
| 24 | Water Meter Supply, installation, testing and commissioning of water meter to measure flow rate of sewage at different locations. At the outlet of micron filtration system before discharging the treated effluent for land application / gardening and plantation purpose MOC -Gun Metal Pipe -Size 50 mm Make Kranti ( ISI ) or its equivalent as approoved by engineer incharge |
| 25 | Electric Panel Supplying, Installation, Testing & CommissioningEpoxy OR powder coated MS sheet metal Body Electric panel of size 1150mmx900mmx350mm for 3R E-ionization sewage treatment plantcomplete with 150 Amps, TPN aluminium bus bar covered with heat shrinakable PVC color coded sleeves suitable complete with connections, inter connections & making arrangement of starters for operating automatic as well as manual mode for 2HP, 3-phase monoblock swage motor-pump -2 Nos ,Dosing pump 5A, 6LPH flow- 02 Nos. 5.5HP, 3 Phasefilter feed pump - 02 Nos. and VoltMeter 72x72, Ammeter 72x72, and 4 Pole, MCCB, 100 Amps, 25 KA with spreader link forincoming supply , 06 Nos TP ,40A MCB ,motorAutomatic level switch for raw water sewage tank to Electrolyzer and delay timer for 3 min for Electrlyzer ON. with rectifier ON, for feed water from intermideate Tank to Activated Glass Media filter and Activated Carbon filter to Treated water tank with Floaty Level Switch, Selector switches as complete required . Instruments -Make Schneider Electric ( ISI )or its equivalent as approved by Engineer in charge and as specified the technical specifications/drawing etc as required. |
| 26 | Sodium Hypochlorite Dosing Chemical Providing of Sodium Hypochlorite Dosing Chemical, pump of rating 5A, 6 LPH flow rate with dosing tank of capacity 100 LTR volume plastic house hold drum including sodium Hypochlorite -Liquid form dosing chemical for remove bacteria & odor from water suitable for 120 KLPD SWTP at site, installation and commissioning of equipments/ electricals/ piping etc complete as described in specifications including obtaining the statutory approvals from the concern authorities, operation and maintenance with own staff and consumables as specified in the technical specifications . |
| 27 | Water Drain pump Supplying, installing, testing and commissioning of sewage submersible motor pump (sub type Water Drain pump) 3 Phase 3 HP /2.2 kw motor pumpofcast-iron body, solid handling capacity 35mm Head3-17 mtr,RPM 2800/3000, Dischargr range 100-600LPM suitable for 3 phase, 440 volt supply Model No. SKU PU.CE.SE.279723 crompton makeor its equivlant Kirlosakr /KSB/Lubby |
| 28 | CABLING Supplying & Laying of one number PVC insulated and PVC sheathedArmoured/ XLPE power cable of 1.1 KV grade of size 3.5 x50 sqmm, direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering.make Polycab/ Havells/ Finolex/ KEI/ Kalinga/ Gloster / Anchor/ Polytech |
| 29 | EARTHING Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 30 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 31 | Add labour cess @1% on Rs.2893585.00 |
AI Tender Summary
Tender Timeline
Dec 14, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender