|
| 1 | Supply, erection & commissioning of fully auromatic Electric Operated Travelling (EOT) Hoist crane with four direction movable (Up, Down & Cross) of 5 ton capacity with minimum 6 meter lift fora span of 7mtr.+ 5 % On existing M.S. Gantry Rails & M.S. Gantry Girders of suitable size to handle the hoist operation, electric butt welded steel round short link chain G.R.30 conform IS-2429-1970 gears as per IS-4460 of EN-8 and supported on ball bearing hook of heavy duty steel forged capable to withstand shock loads free to swipe and rotate as per IS-8610/3815,pension /Axial of EN-9 heat Treated carbon alloy steel complete in all respect as per IS-3177 & 807 leftover any extra work required at site for erection & commissioning of EOT Crane Approved make Wester,Electromech,Indef,Felco, Konecranes ,staras per site requirement.(PH-Badhwana-1) |
| 2 | Supply, erection and commissioning of 30 Cs. V.T. Axial flow pump of 970 RPM, having static lift of 17 feet, including delivery pipe & bends with minimum8mm thickness with bendsupport andcoating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect in accordance with site requirement and as per approved technical specifications. (for PH Badhwana - 2). |
| 3 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 150 HP of 970 rpm, suitable for 30Cs. VT Axial flow pumps with earthing, complete in all respect in accordance with site requirement and as per approved technical specifications(for PH Badhwana - 2). |
| 4 | Supply, erection and commissioning of 10 Cs. V.T. Axial flow pump of 1440 RPM, having static lift of 17 feet, including delivery pipe & bends with minimum8mm thickness with bendsupport andcoating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect in accordance with site requirement and as per approved technical specifications.(for PH Badhwana - 2 additional building). |
| 5 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 50 HP of, 1440 rpm, suitable for 10 Cs pump with earthing, complete in all respect in accordance with site requirement and as per approved technical specifications(for PH Badhwana-2 additional building). |
| 6 | Supply, erection and commissioning of LTDB of 1000 amp capacity including all accessories one incomer of MCCB of 1000 amp with 5 no. outgoing of 300 amp MCCB each with & 63 amp MCB for lighting load indicators, relays, meters, push buttons, bus bars etc. suitable for operation of 4 no. motors of 150 HP capacity with designed capacitor bank of suitable capacity with 8 step APFCR, selector switch, duty contractor, discharge registers, digital display instruments and other allied accessorise for automatic as well as manual operation of capacitor bank suitable for 8 no motors of capacity of 150 HP with earthing mounted on a stand of MS channel (1 feet up from floor) as per site condition and as per approved technical specifications with earthing. (for PH Badhwana - 2 Old Building.) |
| 7 | Supply, erection and commissioning of 50 HP Fully Automatic ATS Starter with a MCCB of 400amp with main contactor of 150amp,tapping contactor of 110amp & star of80 amp for 50 HP motor with ATS starter including connections and small items as, thimbles, nut/bolt, lugs etc. Complete in all respect as per site requirement with a stand of MS Channel (1 feet up from floor) with earthing & as per approved technical specifications. (for PH Badhwana - 2 Additional Building.) |
| 8 | Supply, erection and commissioning of Capacitor Bank 100 KVR to be connected for all panels as perapproved technical specifications.(for PH Badhwana - 2 Additional Building ). |
| 9 | Supply, erection & commissioning of fully automatic Electric Operated Travelling (EOT) Hoist crane with four direction movable (Up, Down & Cross) of 5 ton capacity with minimum 6 meter lift fora span of 7 mtr.+ 5 % On existing M.S. Gantry Rails & M.S. Gantry Girders of suitable size to handle the hoist operation, electric butt welded steel round short link chain G.R.30 conform IS-2429-1970 gears as per IS-4460 of EN-8 and supported on ball bearing hook of heavy duty steel forged capable to withstand shock loads free to swipe and rotate as per IS-8610/3815,pension /Axial of EN-9 heat Treated carbon alloy steel complete in all respect as per IS-3177 & 807 leftover any extra work required at site for erection & commissioning of EOT Crane Approved make Wester, Electromech, Indef, Felco, Kone cranes ,staras per site requirement. (for PH Badhwana - 2). |
| 10 | Supply, erection and commissioning of 20 Cs. V.T. Axial flow pump of 970 RPM, having static lift of 18 feet, including delivery pipe & bends with minimum 8mm thickness with bend support and coating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect in accordance with site requirement and as per approved technical specifications.(for PH Badhwana - 3). |
| 11 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 100 HP of, 1440 rpm,suitable for 20 Cs pump with earthing,complete in all respect in accordance with site requirement and as per approved technical specifications.(for PH Badhwana - 3). |
| 12 | Supply, erection and commissioning of 16 Cs. V.T. Axial flow pump of 970 RPM, having static lift of 14 feet, including delivery pipe & bends with minimum 8mm thickness with bend support and coating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect in accordance with site requirement and as per approved technical specifications.(for PH Badhwana - 3). |
| 13 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 100 HP of, 1440 rpm, suitable for 16 Cs pump with earthing, complete in all respect in accordance with site requirement and as per approved technical specifications. (for PH Badhwana - 3). |
| 14 | Supply, erection and commissioning of MCC/LT panel in control room of pump house of 1000 ampere incomerACB 4 pole with 8 no. Outgoing each of having MCCB of 400ampere along with an additional MCB of 63 ampere for lighting loads, indicators, relays, meters, push buttons, bus barswith 8 No. fully automatic ATS Starters (complete in all respect like relays, indicators timer etc.) of 100 HP withMCCB of 400 ampere with contractor rating 400 amp. 300 amp& 200 amp with designed capacitor bank of suitable capacity with 8 step APFCR, selector switch, duty contractor, discharge registers, digital display instruments and other allied accessorise for automatic as well as manual operation of capacitor bank suitable for 8 no motors of capacity of 100 HP with earthing mounted on a stand of MS channel (1 feet up from floor) as per site condition and as per approved technical specifications with earthing. (for PH Badhwana - 3). |
| 15 | Supply, erection and commissioning of 13 Cs. V.T. Axial flow pump of 970 RPM, having static lift of 18.5 feet, including delivery pipe & bends with minimum8mm thickness with bend support and coating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site requirement and as per approved technical specifications (for PH Badhwana-04.) |
| 16 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 60 HP of , 1440 rpm, suitable for 13 Cs pump with earthing complete in all respect in accordance with site requirement and as per approved technical specifications. (for PH Badhwana-04). |
| 17 | Supply, erection and commissioning of 20 Cs. V.T. Axial flow pump of 970 RPM, having static lift of 14 feet, including delivery pipe & bends with minimum8mm thickness with bendsupport andcoating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect in accordance with site requirement and as per approved technical specifications. (PH-1 Gothra minor) |
| 18 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 75 HP of , 970 rpm, suitable for 20Cs pump with earthing, complete in all respect in accordance with site requirement and as per approved technical specifications. (PH-1 Gothra minor) |
| 19 | Supply, erection and commissioning of 75HP Fully Automatic ATS Starter with a MCCB of 400amp with main contactor of 300amp,tapping contactor of 200amp & star of 110amp for 75 HP motor with ATS with degree of protection including connections and small items as thimbles, nut/bolt, lugs etc. Complete in all respect with a stand of MS Channel( 1 feet up from floor) & as perapproved technical specifications with earthing. (PH-1 Gothra minor) |
| 20 | Supply, erection and commissioning of Capacitor Bank 110 KVR to be connected for all panels with earthing as per approved technical specifications. (for PH-1 Gothara Minor). |
| 21 | Supply, erection and commissioning of 10 Cs. V.T. Axial flow pump of 1440 RPM, having static lift of 20 feet, including delivery pipe & bends with minimum8mm thickness with bendsupport andcoating inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site requirement and as per approved technical specifications. ( PH-Samaspur.) |
| 22 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 50 HP of 1440 rpm, suitable for 10 Cs pump with earthing, complete in all respect in accordance with site requirement and as per approved technical specifications. ( PH-Samaspur.) |
| 23 | Supply, erection and commissioning of 50 HP Fully Automatic ATS Starter with a MCCB of 400amp with main contactor of 150amp,tapping contactor of 110amp & star of80 amp for 50 HP motor with ATS starter including connections and small items as, thimbles, nut/bolt, lugs etc. Complete in all respect as per site requirement with a stand of MS Channel (1 feet up from floor) with earthing & as per approved technical specifications. ( PH-Samaspur.) |
| 24 | Supply, erection & commissioning of Fully AutomaticElectric Operated Travelling (EOT) Hoist crane with four direction movable (Up, Down & Cross) of 5 ton capacity with minimum 6 meter lift fora span of 7 mtr.+ 5 % with new M.S. gantry railing and new M.S. gantry girders with girders support (pillers) for railing and moving girders of suitable size with civil masonry work including all required work for satisfactory running of EOT Crane, electric butt welded steel round short link chain G.R.30 conform IS-2429-1970 gears as per IS-4460 of EN-8 and supported on ball bearing hook of heavy duty steel forged capable to withstand shock loads free to swipe and rotate as per IS-8610/3815,pension /Axial of EN-9 heat Treated carbon alloy steel complete in all respect as per IS-3177 & 807 leftover any extra work required at site for erection & commissioning of EOT Crane Approved make Wester, Electromech, Indef, Felco, Kone cranes ,staras per site requirement.( PH-Samaspur.) |
| 25 | Supply, erection and commissioning of Capacitor Bank 70 KVR to be connected for all panelsas perapproved technical specifications.( PH-Samaspur.) |
