|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 4 | Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand andmanufacture to give an even shade including preparation of surface etc complete. |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 6 | Providing and Laying 40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 stone aggregate of size 12.5mm and down )flooring with floating coat of neat cement to give a smooth surface innot exceeding 02 sqm. (without glass strip) curing etc complete in all building floors wherever specified. |
| 7 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 530x410 mm with integral type foot rests. |
| 8 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) ANGULAR STOP COCK 15 MM DIA |
| 9 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BIB COCK LONG BODY 15 MM DIA |
| 10 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 11 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.740 x 20 mm |
| 12 | Providing and fixing Tower bolt 150x10 mm with necessary screws etc complete.Brass (Bright Finish) |
| 13 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia |
| 14 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.Size 300x16mm M.S (Bright Finish) |
| 15 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.Brass (Chromium Plated) |
| 16 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK 15 MM DIA |
| 17 | Providing and Painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade i/c cleaning the surface complete on old surface. |
| 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 19 | Providing, Fitting and fixing brass fittings of approved quality and size complete:GATE WAY VALVE 20MM DIA |
| 20 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 21 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.75 mm dia. PRINCE / SUPREME soil Pipe |
| 22 | Providing, fitting and fixing. bends of various types plain or band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sandspipes.75 mm dia. Supreme / Prince |
| 23 | Providing, fitting and fixing. bends of various types plain or band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sandspipes.100 mm dia. Supreme / Prince |
| 24 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm |
| 25 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) SHOWER ROSE WITH ARM |
| 26 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 27 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps,CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions complete including cutting and making good the walls wherever required. HINDWARE One wash basin with one pillar cock. 55 cm x 40 cm |
| 28 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermalstability for hot & cold water supply,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes |
| 29 | Providing, Fitting and fixing brass fittings of approved quality and size complete:GATE WAY VALVE 20MM DIA |
| 30 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 500 LITERS CAPACITY |
| 31 | Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats: |
| 32 | Providing and fixing to existing door shutter 30 mm thick Glass Fibre Reinforced Polyester (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of seasoned wood inside at required placed for fixing and fittings, cast monolitically with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS 14856-2000 including fixing to frames. |
| 33 | Providing fitting fixing Fibre Glass reinforced plastic door frames of cross section 150 x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. . The laminate shall be moulded with fire retardant grade unsaturated polyester resin and chopped Mat. Doorframe laminate shall be 2 mm thick and shall be fitted with suitable wooden blocks in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame |
| 34 | Providing and washing with two or more coats of snowcem, durocem, cemcote etc of approved quality and manufacture on exterior walls to give an even shade including preparation ofsurface on old surface complete. |
