|
| 1 | S.I.T.C. of70WLED Streetlight Luminaire, ENDURA CITYLINER NEO70W, IP 66, withaluminium housing, high efficient LED ,toughened glass, makeHAVELLSCat No. ENDURACITYLINERNEOSL70WLED757PASYBOTGor equivalent in Crompton/Bajaj , incluiding Suitable size GI bend pipe, clamps, nut boltsetc. Compete. |
| 2 | SITC of200WLED Highbay Luminaire,RADIOSO HIGHBAYIP 65, make HAVELLSCat No. RADIOSOHB200WLED75790DBOPC Compete.or equivalent in Crompton/Bajaj, Complete. |
| 3 | S.I.T.C. of50WLED flood light Luminaire,JETA QUANTO PLUS, IP 66,aluminiumdie cast with high power LEDs, make HAVELLSCat No. JETAQUANTOPLUSFLP50WLED757SYMLENS or equivalent in Crompton /Bajaj , Compete. |
| 4 | SITC of18WSlim Surface mounted Square LED panel , Trim Cosmo Surface Squarewithpremium diffuser to ensure glare free & even light distribution .make Havells , cat no.:LHEAAKP7IL1W018or equivalent in Bajaj/ Crompton. |
| 5 | S.I.T.C. of20WLED batten , E-Lite LED Pride Plus Neo nxtwithDecorative ultra slim round profile LED lighting fixture, extruded polycarbonate, .make Havells , cat no.:LHEXAQP7PN1W020or equivalent in Bajaj/Crompton, Complete. |
| 6 | Supply and fixing ofIP 55/IP 65 cable junction box with plain walls of size (139mmx119mmx70mm )with 8 nos of Elmex connector for cable termination etc.make: Henselcat. No. K 8060 complete as required. |
| 7 | Supply and fixing ofIP 65 cable junction boxwith plain walls of size (167 mm x 125mm x 82mm ) with 8 nos of Elmex connector for cable termination etc. make: Hensel Cat No. K 8100 Complete as required. |
| 8 | Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1KV gradeconforming to IS:1554(Part I ), IS : 7098 ( Part II ) with latest amendments of following size: |
| 9 | (4) 4Core 10 Sq.mm |
| 10 | Supply of4 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. |
| 11 | 4 Core 4 sq.mm |
| 12 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. |
| 13 | (b) In rocky strata |
| 14 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc.complete as required. |
| 15 | Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required. |
| 16 | (2) 4 x 4 Sq. mm. |
| 17 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required. |
| 18 | (4) 4 x 10 Sq. mm. |
| 19 | Supplying and fixing 0.5 A to 5 A rating,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\" |
| 20 | (a) SP, Cat A |
| 21 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with modular switch, modular plates, suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. |
| 22 | (f) Group C -- with Cat B Modular Accessories |
| 23 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required. |
| 24 | (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm casing ) |
| 25 | (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing ) |
| 26 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm casing ) |
| 27 | (d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm casing ) |
| 28 | Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. |
| 29 | (b) Cat B |
| 30 | Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) |
| 31 | (b) Cat B |
| 32 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) |
| 33 | (b) 4 way (8+12), double door, Horizontal type Cat A |
| 34 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) |
| 35 | (f) 8 way double door Cat A |
| 36 | Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. |
| 37 | (a) SP, Cat A |
| 38 | (c) DP, Cat A |
| 39 | (d) TP, Cat A |
| 40 | (e) TPN , Cat A |
| 41 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC coverhaving locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil.c)Watering GI pipe, 20mm, Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). |
| 42 | (b) In rocky strata |
| 43 | Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) |
| 44 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. |
| 45 | (a) Cat A |
| 46 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 47 | (b) Cat B |
| 48 | Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. |
| 49 | (a) Cat A |
