02 - Various Works In Mppg College Chittorgarh 02 - Various Works In Mppg College Chittorgarh PART A WATER HUT 2 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. 3 Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Random rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement mortar 1:6( 1 Cement : 6 Sand ) 5 Random rubble dry stone kharanja under floor 6 Filling in plinth withlocally available river shingle under floors including watering ramming consolidating and dressing complete including cost of river shingles. 7 Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level. 8 Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth levelincluding curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20mm nominal size) 9 Brick work in super structure up to third storeyCement mortar 1:6 ( 1 cement : 6 coarse sand ) 10 Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course )Cement mortar 1:4 ( 1 cement : 4 coarse sand ) 11 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects:Nimbahera Stone 12 Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of.Green/Black/Other graniteAbove 3601 cm2 Slabs 13 Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge.Granite Work 14 Providing and laying in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement forBeams, suspended floors, roofs, griders having slopes up to 150 , landings,balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M 20 grade nominal mix (with graded stone aggregate 20mm nominal size) 15 Centering & shuttering with ply wood or steel sheets including shuttering , propping, barcing both ways with wooden members and removal of form work up to floor three level for:Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockes sills, chhajjas, lintel, beams etc. 16 Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick 17 6 mm cement plaster to ceiling of mix 1:3 ( 1 cement : 3 fine sand) 18 Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing completeFor area of each slab From2001Sq.cm to 5000 sq.cm20 mm thick slab 19 Supplying and fixing in walls machine cut and polished stone shelves tands and sills in CM 1:3 with machine cut edgesKota stone 25 to 30 mm thick 20 Grading roof water proofing treatment with :Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturss specification 21 Providing & laying broken glazed titles on 20mm thick in plain cement Mortar 1:4 (broken glazed tiles not less than 9 Kg/Sqm) and joints filled with white cement with water proofing compund all complete as per direction of Engineer-in-charge. 22 Providing and fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification: 23 Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. 24 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles peg stay etc. as required.Partly fixed and partly openable (fixed area not to exceed 33 %). 25 Providing and fixing square bars or other flat welded to window ventilatiors etc. 26 S&F fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3 mm with suitable screwsat not exceeding 150mm distance at all height with all lead and lift with scaffolding 27 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexureA30 mm thick Commercial Veneer both sideAdd extro for Sunmica 0.8 mm thick. 28 Providing and fixing fully panelled double leaf shutter for doors as per approved design and drawing with approval ordinary C.P./oxidised steel fittings as per Annexure A and width of styles & top rails of 100 mm and lock rails width of 150 mm and bottom rails of 200 mm width including teak wood beading of size 19 mm x12 mm on both faces complete. 30 mm thick wood sqm Local Wood Gr-I Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.58 mm panels 29 Providing and fixing pressed steel mitred doors frames manufactured from commercial mild steel sheet of 1.25 mm ( 16 gauge) thickness including hings jamb, lock jamb, head and if required angles threshold of mild steel angles of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge.Double Pitam Door FrameProfile E : 165 x 60 30 Applying Birla /JK white cement based putty over cement plaster surface for making even surface 31 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including prepration of base with primer putty lippy complete in allrespect. 32 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 33 Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension).With 75 mm opening when closed. 34 Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 35 P&F Seal coat with gril patti Cement mortar 1:2, reinforced with 6mm wire fine finished with primer putty, paint complete in all respect as per design & direction by engineer incharge size 18 x 14 x 3 36 P&F chattri with dome of Cement concrete 1:2:4 reinforced with 8mm wire fine finished with primer putty, paint complete in all respect as per design & direction by engineer incharge size 2 x 2 x 5 37 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:) BrassLong body, 15mm nominal bore weight not less than 690 gm 38 P & F Grating of approved quality /make Stainless steel sheet size 125 mm dia 39 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia 40 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 41 Bend 87.5 42 110 mm dia 43 75mm 44 Plain tee 45 110 mm dia 46 75 MM 47 VENT COWEL 110 MM DIA 48 P TRAP 110 MM DIA 49 P & F PVC Storage Tank (IS : 12701marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 litres capacity. 50 P & F GI pipes ( Internal works ) with GI fittings excluding Union(IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.Exposed on wall25mm dia Nominal BoreB Class 51 P & F GI pipes ( Internal works ) with GI fittings excluding Union(IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.Exposed on wall15mm dia Nominal BoreB Class 52 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 53 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25mm nominal bore. 54 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm,15mm. 55 Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: 112mm drain,225mmm av. Depth 56 Providing & laying chequerred plain cement concrete embessed to specially manufactured non-slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete 57 Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three levelThermo mechanically treated bars (conforming to relevant IS code.) 58 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.Size 600 mm x 600 mm 59 Providing and fixing of all plastic fixed louvered ventilators shall be made from extruded PVC section reinforced with steel. The corners and joints shall be mitre cut and welded The outer frame shall be made from extruded PVC section having an overall cross section of 40 x37 mm Suitable snap fit moulded louver ends louver blade of PVC/glass and safety bar shall be provided. 60 Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). 61 Providing and fixing to existing door frame 30 mm thick factory made polyvinl Chloride (PVC) door shutter made of styles and rails of UPVC hollow section of size 60x30 mm and wall thickness 2 mm +/- 0.2 mm with inbuilt decorative moulding edging on one sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanised / plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless of size screws. The style of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm +/- 0.1 mm wall thickness. The lock rail made up of H section, a UPVC hollow section of size 100 x30 mm and 2 mm +/- 0.2 mm wall thickness fixed to the shutter style by means of plastic/ galvanised M.S. U cleats. The shutter frame filled with a UPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm +/- 0.1 mm wall thickness. The panels filled vetically andtie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufactures specifications and directon of Engineer-in-charge including all door fittings such as hinges, L-drop, handles, locking bolts etc. as per approved of Engineer -in-charge 62 P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm 63 P & F White vitreous china Double Syphonic European W.C. (I.S: 2556 Mark) with mounted W.V.C. flushing cistern of (I.S. 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. 64 P&F Ist quality WVC Urinal (IS :2556 mark) with 25 mm dia G.I.waste pipe, dome waste couplings, concealed iron brackets or screw etc. completeFlat back (large) or half stall size 610x400x80mm 65 P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. 66 P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 600mm 67 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 68 P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :CP brass push type 20mm nominal bore. 69 P & F Beveled edge Mirror of special glass of approved make (Atul Modi Guard Saint Gobin orequivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers.Size 600 x 450 mm x 4 mm thick 70 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 71 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.75mm dia 72 Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth . 73 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400x140x150 cms (for 50 users) 74 P & F GI pipes ( External works ) with GI fittings eccluding Union(IS:1239 mark )and MS clamps, including trenching and refilling earth etc.25mm dia Nominal BoreB Class 75 Centering & shuttering with ply wood or steel sheets including shuttering , propping, barcing both ways with wooden members and removal of form work up to floor three level for:Walls (any thickness) including attached pilasters, buttresses, plinth and string course. 76 Providing and laying in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement forWalls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc.M25 grade Design mix 77 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked)
