|
| 1 | Binocular Microscope | • Microscope type: For veterinary pathological/clinical examination, Built in light source and light intensity regulator, non hinged type, ISI Marked• Eye piece type:Compensating• Eye piece magnification: 10X; Set of two• Extra eye pieces: 40X; 60X and 100X• Objective type: Achromatic• Objective magnification: 100X• Objective aperture: 1.25• Lamp for illumination: LED• Stage: Rectangular (Approximate 125 mm x 140 mm)• Provision of Coarse and Fine adjustment; Co-axial focusing and micrometer; instructional manual• Compatible with power supply230-240 VAC,50-60 Hz• Warranty: Minimum 1 Year |
| 2 | Fully automated blood analyzer | • System type: For animal blood analysis (complete blood count and differential WBC count) Closed and in built, Fully automated; Bench top; ISO Certified• Provision for analysis of RBC, WBC, platelets, MCV and Hb• Sample volume requirement: 20 to 50 µl• Sample intake: Open vial• Provision of automatic sample dilution and self cleansing system• Capacity of blood analyzer: Approximate 50 to 60 samples per hours• Calibration: Automatic• Diluting nozzles: separate for RBC and WBC• Display: LCD/LED• Provided with inbuilt thermal printer• Data storage: Approximate 5000 • Provision of data transfer• Data management: Histograms in display and print out• Data entry: ManualFor More Details plz. refer to specification document. |
| 3 | Serum Biochemical Analyzer | • Semi-automatic or Automatic, Serum Biochemical Analyzer for clinical diagnosis of animal species• The range of parameters such as ALB, ALKP, ALT, AMYL, AST, BUN, Ca, CHOL, CK, CREA, GGT, GLU, LAC, LDH, LIPA, NH3, PHOS, TBIL, TP, TRIG, URIC, GLOB, UCRE, UPRO, Ca, Mg etc with single use slides for all individual • It should be compact, portable and with touch screen • Incubator with temperature control at 250C, 300C, 370C, 380C• Inbuilt programs and test results with a thermal printer, user friendly interface/screen• Facility to transfer result/data using USB/SD/other• Microprocessor based allowing endpoint, 2 point, kinetic and polygonal analysis• Provided with reagents to analyze approximate 500 samples• It can work with various types of samples such as Serum, Plasma, Urine and other fluids• Sample volume: 5 to 15µlFor More Details plz. refer to specification document. |
| 4 | Manual DLC Counter | • Manual blood cells counter for basophils, eosinophils, monocytes, lymphocytes and neutrophils intended for clinical/pathological examination of animals• Material: Made of steel and plastic |
| 5 | Hemocytometer | • Counting chamber for RBC and WBC• Size: 30mm x 70 mm• Material should be thick crystal with about 4mm • Height from bottom of chamber to its cover should be 0.1mm • Improved silver lining of counting grids• Provided with diluting pipettes for RBC and WBC count• Minimum 50 cover slips per unit • Carry case with padded base• Must be certified by ISO/EU CE |
| 6 | Field Camera for gross photography | • Type of Camera: Compact digital, still photography; ISO certified• Pixel: Minimum 16 • Optical Zoom: 61X or more; 1800 field view• Focus mode: Automatic• Focal length: 10 mm (minimum) to 539 mm (maximum)• Image sensor: CMOS• Lens mounting: Fixed• Lens aperture: 2.8 to 8• Sensor size: 1/2.3• Frame rate: 24• Flash: Inbuilt• Shutter speed: 0.04 to 60• Display size: 3 to 3.5 inch; provided with vari angle screen and touch screen • Operating temperature & Humidity: 0 to 400C; 15 to 85% RH• Provision of video and audio recording (inbuilt); Noise reduction featureFor More Details plz. refer to specification document. |
| 7 | Laminar Flow | • Horizontal laminar air flow closed cabinet with bench top• Provided with burner for attachment of gas cylinder/spirit lamp; instructional manual• It should be freestanding and a Mobile unit• Made of stainless steel material with acrylic transparent front panel • Size: Minimum 3x2x2 (WxDxH) feet• Laminar Air flow velocity: approximate 0.26 to 0.38 m/s• Cabinet light: LED• Provided with UV light• Noise level: About 65±5 DB• Air filter: 0.3 micron• Front panel thickness: About 2 mm • Manual front panel operation• Provided with external switch for fluorescent/LEDlight, UV light and air flow• Provided with LED display• Compatible with power supply 100-240 VAC, 50-60 Hz • As per standards of ISO/ EU CE• Warranty: 3 Year |
| 8 | Hot Air Oven | • Hot air oven for heat sterilization of glassware and instruments• Capacity: =125 litre (125 to 200 litre)• Power consumption: =1000 watts (1000 to 1500 watts)• Temperature range and accuracy: Ambient to 2500 C with accuracy ±10C• Operating temperature and humidity: 10 to 400C and 15 to 90 humidity• It should be inbuilt with microprocessor based PID control and temperature sensor• It must be provided with safety alarm system; instructional manual• Equipped with removable selves of stainless steel wire mess/perforated aluminium• Number of selves: Minimum 3• Door provided with heavy hinges and handle to lock and open• Provision of motorized blower for forced air circulationFor More Details plz. refer to specification document. |
| 9 | Autoclave | • Vertical, top loading cylindrical autoclave for vapor and pressure sterilization• Sterilizer chamber capacity: 20 to 25 litre• Dimension: Variable,24 mm x 30 mm/ 450 mm x 350 mm (Height x Diameter); circular• Sterilizer chamber material: Double walled stainless steel of high quality• Sterilizer chamber working pressure: about 16 to 18 pound per square inch• Sterilizer chamber working temperature: about 1210C• Temperatureresolution: 0.10C• Sterilizer chamber door: Hinged and made of heavy duty stainless steel; manual operation• Sterilizer chamber door sealing with elastomeric rubber gasket that can withstand temperature up to 1400 C and pressure up to 30 psi • Controller system: Auto set to 15psi and 1210C• Microprocessor base temperature controller with accuracy of ±10CFor More Details plz. refer to specification document. |
| 10 | Incubator | • Incubator for biological products/bacterial culture under controlled conditions• Capacity: 100 to 200 litre• Dimension: Variable, approximate 455x605x465mm/600x450x450 mm /455x455x455 mm (LxWxH)• Weight: Approximate 50 to 80 kg• Inner chamber made of stainless steel• Outer side coated with CRCA steel and insulated with glass wool• Door: Manually operated, insulated and fitted with heavy hinges, provide with single or double glass window• Selves: Removable, at least 2 in number and made with stainless steel wire mess• Temperature range and accuracy: 50C to 600C with an accuracy of ±0.50C• Control: Microprocessor based PID• Display: LED reflecting temperature of chamber• Provided with protection from overheating, auto power cut and safety alarm• Compatible with power supply 220-240 VAC, 50-60 Hz single phase• ISO certified• Warranty: Minimum 2 Year |
| 11 | Monopan electronic balance | • Laboratory analytical electronic balance for measurement of chemicals/reagents• Maximum capacity of weighing: 220 gm• Sensitivity of weighing: 0.1 mg• Provided with internal flat circular pan as per standards of weights and measures general rules• Diameter of pan: Approximate 90 mm• Response time to weigh:2 to 5 second• Protected from overload, provided with tare facility and shock absorption facility• Provided with printer and or PC connectivity• Operating temperature range: -100C to 500C• Protected with transparent wall and facility for labeling at the base level• Compatible with power supply 220-240 VAC, 50-60 Hz single phase• ISO certified• Warranty: 1 Year |
| 12 | Post-mortem kit | • Kitshould bedesigned for postmortem of both small and large• Postmortem Kit should contain at least following instruments 1. Mayo Scissors 23cm Straight2. Bowel Scissors 21cm3. Mayo Scissors 17cm TC Straight4. Dissection Scissors 14.5cm S/B Straight5. Boning Knife Sharp6. Skinning Knife Curved7. Skinning Knife Curved8. Autopsy Knife Curved9. Chopper Stainless10. Bone Saw11. Postmortem Hammer12. Knife Sharpener13. Scalpel Handle #414. Scalpel Handle #315. Measuring Tape 2M16. Spine Wrench17. Brain Knife18. Dressing Forceps 16cm19. Liston Bone Cutting Forceps20. Bone Chisel21. Kelly Forceps 14cm Straight22. Kelly Forceps 14cm Curved23. Tissue Forceps 1:2 16cm24. Metal BoxFor More Details plz. refer to specification document. |
| 13 | Instruments for minor surgeries | • Kitshould bedesigned for minor surgeries including first aid, small and large animals• Postmortem Kit should contain at least following instruments 1. Iris Scissors 11.5cm2. Mayo Scissors TC 15cm3. Scalpel Handle #34. Scalpel Handle #45. Mayo Hager Needle Holder TC 16cm6. 2 Mosquito Forceps Curved 12.5cm7. 2 Mosquito Forceps Straight 12.5cm8. 2 Kelly Forceps Straight 14cm9. 2 Kelly Forceps Curved 14cm10. Dressing Forceps 16cm11. Tissue Forceps 1:2 16cm12. 4 Backhaus Towel Clamps 11cm13. Adson Forceps 12cm14. Adson Tissue Forceps 1:2 12cm15. Adson Brown Forceps 7:7 12cm• Instruments should be made of surgical grade stainless steel material and polished• Instruments should rust free• Instruments should be reusable after sterilization• Use: Right and left handed• Instruments should be ISO or CE certified for its quality |
| 14 | Small animal operation table and light system | • Two panel steel table top system that can be adjusted from horizontal to near vertical position to hold small animals in desired position for surgery• Equipped with powerful and durable hydraulic/electric lifter that can lift around 25 to 45 inches and can holds approximate 120 kg weight on the top• The movement should be smooth with easier braking• Size: Approximate 20 x 55 feet (WxL)• There should be provision thermostatic control unit for temperature monitoring and control• Provision of buffer hinges and air spring to cushion the dropping impact of top and panels• Worktop swivel angle: 00 to 450• Designed with waste channel and drain hole to allow discharge/fluid collected into tnasluscent bucket attached with it• Mounted with shadow less light system• Compatible with power supply 220-240 VAC, 50-60 Hz single phase• Warranty: 1 Year |
| 15 | Portable Ultrasonography Machine | • Ultra-portable for veterinary use. • Can be used by single person, lightweight (Maximum 1.5 to 2.0 kg), shock resistant and with corrosion free alloy body.• Built in software and firmware with facility to upgrade without extra cost.• Waterproof front face and waterproof connector plugs for equipment safety and durability especially during field use.• Supplied in very sturdy easy to carry case with battery recharger, minimum 32GB memory stick, ultrasound gel, leather carrier bag including spacer, sun protector, arms free extender and inbuilt battery charger.• Should be backed by certifications complying CE Marked to Council Directive 93/42/EEC, ISO 13485 / ISO 14001 / ISO 9001 / EMAS / UL. In case of manufacturer certifications, the same to be produced at the time of delivery/installation.• Warranty of 1 year • Optional: Onsite free installation and free training for minimum 2 days on purchase.• Optional: Free demonstration before issue of supply order.Imaging:• Should have minimum 6” TFT LCD/LED monitor working on VGA Format.For More Details plz. refer to specification document. |
| 16 | Chemical, Plasticware and glassware | As per requirement (Separate list; consumable items) |
| 17 | Furniture and fixtures for laboratory | • Type of lab furniture, accessories& fixture: Modular1. Side bench with table top and without rack2. Side bench with table top and rack3. Island bench with table top4. Side sink with table top• Ground clearance: 25 to 100 ±5 mm• Type of frame: C type frame for installation• Frame material: galvanized and zinc coated GI steel sheet• Thickness of frame, side cover panel, metal shutters and handles: 1.1 mm• Cabinets material: GI steel sheet• Thickness of cabinet frame cover and drawers support brackets shelves slide thickness 1.2 mm• Load capacity of shelves and drawers: approximate 40 kg• Load capacity of cabinets: approximate 80 kg• Rear panel material and thickness: GI steel sheet of 1.1 mm• DimensionFor More Details plz. refer to specification document. |
| 18 | Refrigerated micro centrifuge | • Microprocessor controlled high speed and CFC free refrigerated micro centrifuge system• Temperature range: -10 to 400C• Running time option: 1 to 99 min or Continuous• Rotor: To hold at least six micro centrifuge simultaneously with 0.2 and 0.5 ml capacity• Lid: Aerosol tight and made of polysulfone or equivalent material• Speed (RPM):Approximate15000 (Maximum range)• Relative centrifugal force (RCF): Approximate 20,000 x g to 22,000 x g• Display: LCD display for internal temperature, time, speed and RCF• Operation of refrigerated micro centrifuge: Keypad operation/manual• Provided with modes to accelerate, decelerate and break off• Alarm system for imbalance • Compatible with power supply: 230±10, 50 Hz AC• Certification for laboratory use • Warranty: 1 Year |
| 19 | Digital pH meter | • Microprocessor based Digital pH meter• pH Range: 0 to 14 • pH resolution: 0.01• Accuracy of pH measurement: ±0.05• Calibration: up to 3 digits with auto buffer• Provided with storage pocket for pH electrode• Digital display: LED/LCD/Touch Screen, 3 digits display• Temperature indication with automatic compensation from 0 to 1000C• Operating temperature and humidity: up to 500C and 90% RH• Working Power supply: 230±10, 50 Hz AC• Test report/certification for laboratory use to be produced by the supplier• Warranty: 3 Years |
