|
| 1 | Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. mwith shutters (without taking off shutters from the frame) each all specified and as directed. |
| 2 | S & F 2nd class hardwood, plain solid straight chowkats and frame wrought framed rebated on the solid rounded or chamfered put together with glue pinned and joints all specified and as directed. |
| 3 | Supply and fix 35mm thick,2nd class hard wood Plainframed factory made Panelled shutter ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed. |
| 4 | Supply and fix 35mm thick, 2nd class hard wood, glazed and skeleton shutters (Partly Panelled and Partly Glazed), open rebated and prepared to receive glass, gauze etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part I, section 8, clause 8.24(a) complete all as specified and as directed. |
| 5 | S &F 300 mm long aluminumsliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl minimum of 6 bolts and nuts four on bolt plate and two on staples plate and fixed.. |
| 6 | S &F butt hinges medium weight cold rolled mild steel of 100 mm long Complete all as spacified and as directed. |
| 7 | S &FAluminumhandle casttype stove enamelled blackof 150 mm long Complete all as spacified and as directed. |
| 8 | S & F Aluminum anodised barrel tower bolt,extruded section and fixed of length 150 mm size Complete all as spacified and as directed. |
| 9 | S&F 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as spacified and as directed |
| 10 | Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all specified and as directed. |
| 11 | M&L plain cement concrete 1:3:6 type C-1 using20mm graded stone aggregate set in cm 1:4as in blocks for fixing hold fasts or any other purpose all as specified. |
| 12 | S&L mild steelBands, straps, supports or stays for rainwater, ventilating pipes including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains hand made sliding bolts; clamps hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc all as specified. |
| 13 | M&L treating with tar or coal tar on back of chowkhat of any description and girth area exc 0.1 Sqm and n.exc 0.50 Sqm each all as specified. |
| 14 | S & F Anodised Aluminium frame for doors, windows, ventilators, fixed partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified. |
| 15 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified. |
| 16 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directionEngineerin- charge. |
| 17 | M & L for hard core of guage not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders all specified and as directed. |
| 18 | M & L for plain cement concrete 75 mm thick, type C2, 1:3:6 (using 40 mm graded stone aggregate) as in plinthprotection/ path etc finished surface even and smooth witout using extra cement all specified and as directed. |
| 19 | Demolition of cement concrete (un reinforced) in ground floor/paving n.exc 15 cm below or above ground level all as specified. |
| 20 | M&L for 25 mm thick PCC 1:2:4, type B1, using20 mm graded stone aggregate as in flooring finished even and fairwithout using extra cement complete all as specified and directed |
| 21 | M&L coloured Non Skid joint free ceramic colored tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to matchover 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking key, scrubbing down with water etc all specified and as directed. |
| 23 | M&L for plastering in vertical surfaces such as skirting, dados and risers to steps in 10 mm thick in CM 1:4 all specified and as directed. |
| 24 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 all specified and as directed. |
| 25 | M&L for moorum/red bajri filling in floors or pavings,laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering etc all specified and as directed. |
| 26 | M&L for 75 mm thick PCC 1:4:8, type D2, using 40 mm gradedstone aggregate as in subbase all as specified. |
| 27 | Roughening surfaces of old concrete floor by by picking , sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm all as specified |
| 28 | M&L chequered cement concrete tiles 30cm x 30cm x 25mm thick of size as approved by GE set and jointed in neat cement slurry in floors with graycement and pigment over 20 mm thick screed bed in 1:6 complete all as specified |
