Hiring Of One Number Mini Lorry Of Minimum 700 Kg Load Carrying Capacity Along With One Driver And One Helper For Movement Of Material On Daily Rental Basis At Bhel Trichy.-. Ensuring The Availability Of Proper Rc Book For The Vehicle, Fitness Certific, BHEL Trichy-Tamil Nadu

Hiring Of One Number Mini Lorry Of Minimum 700 Kg Load Carrying Capacity Along With One Driver And One Helper For Movement Of Material On Daily Rental Basis At Bhel Trichy.-. Ensuring The Availability Of Proper Rc Book For The Vehicle, Fitness Certificate As Per Motor Vehicle Act 1988 And Amended 1992 Sec. ( 256 ) With The Driver And Must Be Produced On Demand By Bhel Authorities. Transporter / Owner 02. Verification Of Above Documents At The Factory Gates / Premises Bhel Security Staff 03. All The Lights / Horn Of The Vehicle Should Be In Working Condition Driver / Transporter 04. Drivers Must Have Valid License As Specified In The Motor Vehicle Act Sec.3 To 28 Transporter / Executing Agency / Security 05. Insurance Of Motor Vehicle Against Third Party Sec. 146 Transporter / Owner 06. Loading Of Material On The Trailer With Suitable Packing And Support Duly Taking Into Account Centre Of Gravity Of The Load. As Far As Practicable, Avoid Over Hanging Of Materials. Transporter / Executing Agency 07. Ensure Suitable Support, Lashing, Provision Of Red Flag And Light During Night In The Rear End Of The Vehicle Transporter / Executing Agency. 08. Movement Of Material Slowly ( Maximum 20 Kmph ) Without Causing Any Fall Of Material Or Damage To Them. Transporter 09. The Driver Of The Vehicle Must Possess Valid Licence And Produce On Demand By The Security / Bhel Staff. Transporter / Executing Agency 10. In Road Junctions, Speed Breakers And Railway Crossing The Speed Should Be Lowered And Vehicles Should Proceed Cautiously. Driver / Random Check By Transporter 11. The Vehicle Should Not Be Parked In The Road In Such A Way As To Cause Obstruction To Vehicular Traffic. Driver / Transporter 12. No Persons Other Than Driver Should Be Allowed To Sit Or Stand In The Cabin Of The Prime Mover. Driver 13. The Vehicles Should Be Driven Only On Roads; Short Cuts Are To Be Avoided. Internal Road Safety Signs Should Be Followed. 4. There Must Be A Minimum Safe Distance Of 15 Metres Between Any Two Moving Vehicle. Driver 15. The Driver Should Avoid Making Quick Starts, Sudden Stops, And Sharp Turns At Excessive Speed. Avoid Rash Driving And Risky Negotiations At Curves. Transporter / Executing Agency 16. The Stacking Of Loads On The Vehicle Should Be Evenly Placed. The Load Should Not Be Heaped Together Or Dumped Over The Chassis. Transporter / Executing Agency 17. The Carrying Capacity Must Be Verified With The Rc Book Before Loading. The Load On The Vehicle Should Not Be Beyond Its Standard Capacity. Transporter / Executing Agency 18. The Loaded Materials Should Be Fastened Tightly With Wire Rope. Manila Rope Should Not Be Used. There Must Be Slide Packing Such As Gunny, Rubber‐Tyre Between The Sharp Edges Of The Job And Wire Rope In Order To Avoid Cut In The Wire Rope. Transporter / Executing Agency 19. There Must Be Minimum Two Fastening And It Should Be More In Case Of Lengthier Loads. Transporter / Executing Agency 20. The Loose Pieces Should Be Bundled Before Loading On The Vehicle Transporter / Executing Agency 21. There Must Be Red Flags For The Lengthy Load Which Extend Beyond The Body Of The Vehicle. Transporter / Executing Agency 22. The Materials Should Not Be Stacked Too High To Avoid Hitting Against Live Electric Lines. Transporters / Executing Agency 23. The Load Should Not Be Over‐Hanging More Than 3 Feet From The End Of The Body. Transporter / Executing Agency 24. While Transporting The Loose Scrap, There Must Be Wire Knitting Cover To Prevent Falling Of Scrap On The Way. Transporter / Executing Agency 25. While Loading / Unloading Proper Slinging Practice Should Be Followed Executing Agency. 26. The Vehicle Should Not Be Moved Directly Inside The Production Buildings In Case The Materials Are To Be Loaded, Unloaded There. But The Vehicle Should Be Parked Outside The Building And The Driver Should Ascertain The Passage As Well As The Unloading Points, With The Help Of Shop Officials. This Will Avoid The Congestion Or Blocking Of Traffic In The Gang‐Way. Driver 27. When Reverse Operation Is Undertaken Adequate Helpers Should Be Engaged To Ensure Safe Movement. Driver 28. Random Checking Of Vehicles For Safe Movement Of Materials Tlc 29. Ensure Communication To All User Departments Regarding Safe Transportation Of Materials. Stores / Wcm 30. Giving Feedback To Head / Contracts For Taking Corrective Actions. User Departments, Security & Tlc 31. Review Of Feedback For Corrective Action.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	16-12-2021	EXTENSION OF DUE DATE AND REMOVAL OF ADDITIONAL WAGES	Date	23-12-2021

Refer document

Refer document

Refer document