Military Engineer Services-MES has published Cleaning Of Pvc Rcc Overhead Tanks Repair To Leakage Seepage And Connected Works In Zone C D Under Ge North Secunderabad Cleaning Of Pvc Rcc Overhead Tanks Repair To Leakage Seepage And Connected Works In Zone C D Under Ge North Secunderabad. Submission Date for this Tender is 06-01-2022. Industrial Cleaning Work Tenders in Garrison Engineer North 35 Allenby Lines Secundera Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-01-2022 |
| Sl. No. | Item Description |
| 1 | Cleaning of PVC water tank capacity n exc500 litres at any height ( on accessible/inaccessibleroofs) by removing all scale, dirt, mud, any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge from bottom and other growth from wall/ floor by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water and disinfecting the tank Disinfecting by using UV radiator and approved chemical (chloriten) for following capacities of tanks complete all as specified and as directed. Note:-(i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii)Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing. |
| 2 | All as item No 01 above but of capacity exceeding 501 ltrs but not exceeding 1000 litres complete all as specified and as directed. |
| 3 | S&F in repair Ball valveof size 15mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedcomplete all as specified and as directed. Make:- PRAYAG / SYMET |
| 4 | All as item No 03 above but of size 20 mm dia complete all as specified and as directed. |
| 5 | All as item No 03 above but of size 25 mm dia complete all as specified and as directed. |
| 6 | Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed. |
| 7 | Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concreteetc complete including removal of demolished material to a distance complete all as specified and as directed. |
| 8 | M&L for plain cement concrete (1:2:4) type B0 using 12.5mm graded agg as in levelling/padding course on roof slab for water proofing treatment complete all as specified and as directed |
| 9 | Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule |
| 10 | M & Lfor providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyesternon oven fabric ( weight not less than 150gm/Sqm) applyied on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections.Laying of membrane by forced ( torch) application with 10cm overlaps.A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed. |
| 11 | M & L forwire brush and cleaningany typeover roof and chhajja top surface etc, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed. |
| 12 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately),exc 250& not exc 500 litrs tankscomplete all as specified. |
| 13 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately) ,exceeding 500& not exceeding 1000 litrs tankscomplete all as specified and as directed. |
| 14 | Supply and fixed1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position including taking down of existing water tank all as specified in SSR Part-I complete all as specified and as directed |
| 15 | Supply and fixed500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in positionincluding taking down of existing water tank including taking down of existing water tank all as specified in SSR Part-Icomplete all as specified and as directed |
| 16 | M&Lfor removal of loose and disintegrated concrete of RCC structual members viz slab, beam column and lintel etc by low impact hammer including removal of debris outside MD land cleaning the surface by high presure water jet or by air blast and exposed reinforcement bars with wire brush and apply two coats of anti-rust protective chemical at suitable intervals all as per manufactures instruction to resist further deterioration of re-inforcement bar including use and waste form and work providing welded wire mesh of size 50 x 50 mm of wire 3mm and using spray gun presure guniting in CM 1:3, 30mm thick finishing guniting surface in cement mortar 1:3, 10mm including using water proofing compound 2% by weight of cement and finishing even and smooth without using extra cement to match the existing surface andUnit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works and Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out finishing guniting/painting shall be made by the contractor complete all as specified and as directed. |
| 17 | All as per item No 16 above but for slabs / chajjas and thickness of guiniting 25mm and finished even and smooth with 5mm thick cement plaster 1:3 usingincludingwater proofing compound 2% by weight of cement complete all as specified and as directed. |
| 18 | M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free ) for cracks not exceeding 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed. Make:- Dr fixit /Berger / Perma |
| 19 | Cutting down plants/trees of girth n exc 15 cm from roof tops/sides of external walls of buildings, chajja, wall junctions, junctions of rain water/soil/waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including reparing the CI/GI/PVC joints of affected locations by applying TUFALO (Herbal medicine) and making good to suit the adjointing surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 with necessary scaffolding/staging etc upto any height complete all as per manufacturer instructions and complete all as specified and as directed. NOTE: Any CI/GI/PVCpipes and fittings damaged during work shall be replaced by new one to ensure leakage/seepage free joint without any extra cost to the department. |
| 20 | Taking down cement plaster from brick/stone wallof any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 21 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm),both coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately |
| 22 | Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6without using extra cement complete all as specified and as directed |
| 23 | M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches not exceeding 3 sqm each patch complete all as specified and as directed. |
| 24 | Supply only water proofing compound complete all as specified and as directed. |
| 25 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 26 | M & L for preparing old decorative surfaces of walls, by washing, rubbing down, stopping andapplying two coats of cement base paint of any colour complete all as specified and as directed. |
| 27 | Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apexultima weather proofpaint over a coat of apex ultima primer including preparation of surface and complete all as specified and as directed. Make : Apex from Asian Paints orequivalent in All Guard from Berger,Weather Shield Max Exterior Acrylic from ICI Dulux |
| 28 | M&L Complete removal of existingtreatment on walls and applying 2 coats of apexultima weather proofpaint over a coat of apex ultima primer including preparation of surface and complete all as specified and as directed. Make : Apex from Asian Paints orequivalent in All Guard from Berger,Weather Shield Max Exterior Acrylic from ICI Dulux |
| 29 | Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 30 | Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on celings complete all as specified and as directed. |
| 31 | M&L for preparation of newly plasteredwall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc plete all as specified and as directed. |
| 32 | Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises plete complete all as specified and as directed. |
| 33 | Material and labour forbrick work with fly ash bricks old size,straight or curved on plan exceeding 6.0 metre mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed. |
| 34 | Material and labour for half brick thick walls with sub-class ‘B’ old size bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed |
| 35 | Dismantling floor, hearth or wall tiling including cementmortar beddingremoving serviceable tiles and rubbish off the premises etc and removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 36 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 etc: complete all as specified and as directed. |
| 37 | M&L for Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and directed. |
| 38 | M&L for Non-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqmin floorsetc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specified and directed. |
| 39 | M&L for Non-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exceeding 0.18 sqm not exceeding 0.36 sqmin skirting / dado etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 40 | M&L for virtified ceramic tiles 10mm (any approved shade of square / rectangular) polished,area of each tilesnot exceeding 0.36 sqmin floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and directed. |
| 41 | M&L for virtified ceramic tiles 10mm (any approved shade of square/ rectangular) polished,area of each tilesnot exceeding 0.36 sqmin walls/skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and as directed. |
| 42 | M&L for Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etccomplete all as specifed and as directed. |
| 43 | M&L for Glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 7 to 8mm/ 450 x 350 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchetc complete all as specified and as directed. |
| 44 | Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 45 | M&L for 20 to 25mm thick machine cut and machine polished cudapah stone slab for kitchen platform jointed and set in CM 1:3 andfixed including rounding to edge of stone slabs one side edgeetc complete all as specified and as directed |
| 46 | M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of slab complete all as specified and as directed. |
| 47 | Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 48 | Demolition of concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance complete all as specified and as directed. |
| 49 | Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed withwater proofing compound as per manufacturer"s instructions incement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule. |
| 50 | Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed. |
| 51 | M&L for plain cement concrete, Type E2 (1:5:10) mix (Using 40 mm graded stone aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed. |
| 52 | Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bendsetc complete all as specified and directed |
| 53 | S&F UPV/PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing ofstainless steel grating in round shape etc complete all as specified and as directed. |
| 54 | S&F75mm bore UPVC (SWR)pipe single socketed(ISI Marked) any length with rubber ring joints, complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etccomplete all as specifed and directed. |
| 55 | S&F110mm bore UPVC (SWR)pipe single socketed(ISI Marked) any length with rubber ring joints, complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etccomplete all as specifed and directed. |
| 56 | S&F 75mm bore UPV/PVC (SWR) bends any radius dimnishing pieces or tapers withaccess doors etc, complete all as specified and as directed. |
| 57 | S&F 110mm bore UPV/PVC (SWR) bends any radius dimnishing pieces or tapers withaccess doors etc, complete all as specified and as directed. |
| 58 | S&F 75mm bore UPV/PVC (SWR) branch piece, single (single Y ) equal or unequalwithaccess doors etc, complete all as specified and as directed. |
| 59 | S&F 110 mm bore UPV/PVC (SWR)junction single (single T ) equal or unequalwithaccess doors etc, complete all as specified and as directed. |
| 60 | S&F for 75mm bore UPV/PVC (SWR) vent cowletc, complete all as specified and as directed. |
| 61 | S&F for 110 mm bore UPV/PVC (SWR) vent cowletc, complete all as specified and as directed. |
| 62 | Supply and fix 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall ceiling or in floors etc. complete all as specified and as directed |
| 63 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 64 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and as directed. |
| 65 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed. |
| 66 | Cutting and grooving of wall for fixing of CPVC pipe linesand after fixing of CPVCpipe line and making good of all cutting surfaces etc complete all as specified and as directed. |
| 67 | S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceilingwith all clampsin Shafts/ducts with all necessary scaffolding to fix the pipes andtesting the joints under prescribed pressure etccomplete all as specified and as directed. |
| 68 | S&FTubes, ‘medium grade’ galvanised, 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floorsetccompleteall as specified and as directed. |
| 69 | S&FTubes, ‘medium grade’ galvanised, 20mm bore with all fitting and fixed complete to walls and ceilings or laid in floorsetccompleteall as specified and as directed. |
| 70 | S&F Tubes, ‘medium grade’ galvanised, 25mm bore with all fitting and fixed complete to walls and ceilings or laid in floorsetccomplete all as specified and as directed. |
| 71 | S&F in repairgun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and as directed. |
| 72 | Cutting holes into or through brick/ stone walls built in cement mortar of superficial area not exceeding150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed |
| 73 | S & F in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 74 | Dismantling of wrought iron or MS worksof any description such as, chajja etc,including necessary straightening of bends complete all as specified and as directed. |
| 75 | Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed. |
| 76 | Material and labour for mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering.Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’complete all as specified and as directed. |
| 77 | Supply and fix mild steel sheeting of 1.25 mm thick plain, black sheetas in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and as directed. |
| 78 | S&FPlates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A and complete all as specified and as directed. . |
| 79 | Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed |
| 80 | S&Fwind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed. |
| 81 | Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa asroof covering/cladding to wall fixed with self tapping(SD) screws complete all as specified and as directed |
| 82 | Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping(SD) screws complete all as specified and as directed. |
| 83 | M&L for new or previously untreated steel surfacesof any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint)including priming with red oxide, zinc chrome complete all as specified and as directed. |
| 84 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQM each complete all as specified and as directed. |
| 85 | S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc complete all as specified and as directed. Make: SINTEX or epuivalent seetings in RAJSHRI , NANDImake as approved by accepting officer) |
| 86 | Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2020 complete all as specified and as directed |
| 87 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed. |
| 88 | S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed. |
| 89 | Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed. |
| 90 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed. |
| 91 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed. |
| 92 | S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised) over the grid providing 4mm thickpre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed. |
| 93 | S&Fstainles steel sink with drainage board,1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipeetc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked. |
| 94 | S&F in repairs stainless steel kitchen plate rack of Cat No P-348 etc complete all as specified and as directed. Make:Prayag polymers Pvt Ltd or equivalent in polytuf as approved by GE. |
| 95 | S&F in repairs vitreous china water closet "Orissa" pattern of size 580mm X 440mm, white with integral foot rest(excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed. |
| 96 | S&F in repairs wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excludingflushing cistern) etc complete all as specified and directed. |
| 97 | S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittingswith long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed. |
| 98 | S&F in Low level flushing cistern 10 ltr capacity, PVC incl waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed. |
| 99 | Supply and fixed in repairsPVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed. |
| 100 | Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 101 | Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 102 | Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints with stainless steel arm duly ISI marked complete all as specified and as directed. |
| 103 | Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metrelong and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved |
| 104 | Supply and fix in repairs 15mm dia brass chromium plated Two wayBib tapwith wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: CAT No F200004FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved |
| 105 | S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 106 | S&F in repairs CPbib tap 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 107 | S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot" or ‘Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed. |
| 108 | Supply and fix in repairs of stop valvescast copper alloy, fancy type chromium plated screwed down with long shank and cup (concealed) type, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed to 15 mm bore pipecomplete all as specified and as directed. |
| 109 | S&F in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed. |
| 110 | Supply and fixed in repairs soap dish brass complete all as specified and as directed. MAKE: CAT No F880011 of HINDWARE or equivalent model inJAQUAR/ PARRYWARE/CERA as approved by GE. |
| 111 | Supply and fixed in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed. MAKE:CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
