Special Repair S / R To N.Rogeising To Guruda Road For The Year 2021-22 S / R To N.Rogeising To Guruda Road For The Year 2021-22
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Dec 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mohana → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair S / R To N.Rogeising To Guruda Road For The Year 2021-22 S / R To N.Rogeising To Guruda Road For The Year 2021-22
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used complete including labour with T&P etc. complete as per direction of the Engineer in charge. |
| 2 | Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5 m transporting to site spreading grading, to required slope and compacted to meet the requirement of tables 300.1 and 300.2 with 1000m lead as per technical specification clause 301.5 as per direction of the Engineer in charge. |
| 3 | Excavation in disintigratedRock (blasting prohibited ) to be removed by pick axe and crow bar and depositing materials with in initial lead as per direction of the Engineer in charge. |
| 4 | Excavation in soil in Hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 and as per the direction of the Engineer in charge. |
| 5 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 and as per the direction of the Engineer in charge. |
| 6 | Labour forlaying Sub Base in layers not exceeding 225 mm watering & compacting to the required density in O.M.C with vibratory Roller including cost, conveyance, royality of all materials etc complete as per direction of Engineer-in-charge |
| 7 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam Gr-II specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405 of MoRD by manual means and as per direction of Engineer-In-Charge. |
| 8 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67-2012 made of Class-B retro-reflective sheeting of high intensity and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 6.7 of IRC 67-2012 and vide clause 801.3, fixed over aluminium sheeting, 2.00 mm thick as per Clause 6.5.2 of IRC : 67-2012 or A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides supported on mild steel angle post 75mm x 75mm x 6mm, 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of M.S.angle of size 50mm x 50mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x75 cm, 60 cm belowground level as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, T & P, excavation, curingetc. complete, under supervision of Engineer-in-Charge.(1200mmx900mm Rectangle)Main informatory sign board |
AI Tender Summary
Tender Timeline
Dec 11, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender