Smart City Development Limited has published Development Of Sports Infrastructure Hockey Turf And Adjacent Area Development At Allahabad University In Prayagraj City. Submission Date for this Tender is 21-12-2021. Infrastructure Work Tenders in Allahabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Structural Development Sports |
| 2 | Sports Accessories (Football) Supply and Installation of Moveable Football Goal Post,Net as per FIFA Specifications and Guidelines. |
| 3 | Hockey Court(97.4 X 59.92m) |
| 4 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 5 | Construction of granular sub-base by providing close graded material of Grade-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 6 | Providing, laying, spreading and compacting graded stone aggregate to wet Mix Macadam specification including premixing the Material with water at OMC by Mix in palce method and carriage of mixed Material by tipper to site, laying in uniform layers with appropriate machinery as per the site conditions in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 7 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.70 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 8 | Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 9 | Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. |
| 10 | Supplying FIH approved global category synthetic hockey surface with polythylene fibre and cast in situ shock pad (minimum 12mm thick) laying, jointing and fixing the same on the bituminous sub base as per the FIH requirements and the pasting of synthetic grass as per specification of the Global Category FIH Completion including all marking on the surface as per FIH rules and standard etc. complete as per the instructions of the engineer-in-charge. |
| 11 | M.S or Iron work of heavy section such as Trusses, built up gates, record racks, roof works, gates etc. brought to required from including supply of steel bolts, nuts wastage, etc. and including rivetting or welding where necessary. Excluding GST |
| 12 | Seats are all made of high density polyethylene (HDPE) as raw material, hollow blow molding, the material has good impact resistance, good mechanical strength and chemical stability, and good weather resistance (Seat should have ROHS report accord with 2011/65/EU and 2015/863/EUPd, Cd, Hg, Cr(VI),PBBs, PBDEs, BBP, DBP, DEHP, DIBP.) |
| 13 | Sports Accessories Supply and Installation of Moveable Hockey Goal Post as per FIH Specifications and Guidelines. |
| 14 | Supply and installation of team shelters, Frame made of metallic 2" x 3" pipe with waterproof laminate floor, provision of transperant shed on back and sides. Portable and movable on wheels. (TS1 Type of size 16"X4") |
| 15 | Extra Drains (Adjascent Area) |
| 16 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 17 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 18 | M-150 Brick work in 1 cement and 5 coarse sand (F.M. 1.25) mortarin foundation and plinth including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 19 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 20 | M.S or Iron work of small sizes and section such as holding down bolts, hold fast, tie road grating etc. brought to required from including supply of steel bolts, nuts wastage, etc. and their fixing required for proper completion of the work. Excluding GST |
| 21 | Entrance Stair Case |
| 22 | Dismantling Lime or cement mortor brick work including stacking of dismantled materials with in 60m distance as directed by Engineer Incharge. |
| 23 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 24 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 25 | M-150 Brick work in 1 cement and 5 coarse sand (F.M. 1.25) mortarin foundation and plinth including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 26 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. |
| 27 | Renovation And Development Works |
| 28 | Dismantling Lime or cement mortor brick work including stacking of dismantled materials with in 60m distance as directed by Engineer Incharge. |
| 29 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 30 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 31 | Red Sand Stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. |
| 32 | M-150 Brick work in 1 cement and 4 coarse sand (F.M. 1.25) mortarin foundation and plinth including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 33 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 34 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. |
| 35 | 450 mm dia RCC pipes |
| 36 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 37 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 38 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete |
| 39 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 40 | Pathway along Hockey court |
| 41 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 42 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 43 | Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:2 cement and coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour T&P etc. required for proper completion of the work excluding base concrete. Excluding GST |
| 44 | Fencing - 320 m |
| 45 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 46 | Cement concrete with 20 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:1.5:3 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 47 | M.S. (tor steel or plain) in palin work such as RCC or R.B work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST |
| 48 | M-150 Brick work in 1 cement and 5 coarse sand (F.M. 1.25) mortarin foundation and plinth including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 49 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 50 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm |
| 51 | M.S or Iron work of small sizes and section such as holding down bolts, hold fast, tie road grating etc. brought to required from including supply of steel bolts, nuts wastage, etc. and their fixing required for proper completion of the work. Excluding GST |
| 52 | Elevated path way and Elevated Decks |
| 53 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 54 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 55 | RCC work with cement approved coarse sand and 2cm guage approved stone grit in proportions of 1:1 1/2:3 in raft foundation and footings excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper copmpletion of the work including cost of binding wire. the reate excludes making of drip course which shall be paid extra excluding GST. |
| 56 | RCC work with cement approved coarse sand and 2cm guage approved stone grit in proportions of 1:1 1/2:3 in lighter beams having the span of 6m excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper copmpletion of the work including cost of binding wire. the reate excludes making of drip course which shall be paid extra excluding GST. |
| 57 | RCC work with cement approved coarse sand and 2cm guage approved stone grit in proportions of 1:1 1/2:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper copmpletion of the work including cost of binding wire. the reate excludes making of drip course which shall be paid extra excluding GST. |
| 58 | M.S. (tor steel or plain) in palin work such as RCC or R.B work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST |
| 59 | M.S or Iron work of heavy section such as Trusses, built up gates, record racks, roof works, gates etc. brought to required from including supply of steel bolts, nuts wastage, etc. and including rivetting or welding where necessary. Excluding GST |
| 60 | M-150 Brick work in 1 cement and 4 coarse sand (F.M. 1.25) mortarin foundation and plinth including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 61 | Red Sand Stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. |
| 62 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. |
| 63 | Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:2 cement and coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour T&P etc. required for proper completion of the work excluding base concrete. Excluding GST |
| 64 | Kerbs around water collection area |
| 65 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 66 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 67 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 68 | Andautomatic & Single key Operation Pop-Up Sprinkler System with UG sump and Pump house room |
| 69 | Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 70 | Add item 251 for every additional 30Mtr lead or part of 30Mtr or for every additional 1.5mts lift or part of 1.5 meter |
| 71 | Cement concrete with 40mm guage approved stone ballast, coarse sand and cement in proportions of 4:2:1 including supply of all materials, labour , tools & plant etc. required for porper completion of the work excluding GST |
| 72 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less All works upto plinth level |
| 73 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns |
| 74 | Centering and shuttering including strutting, propping etc. and removal of form work for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 75 | Centering and shuttering including strutting, propping etc. and removal of form work for :Suspended floors, roofs, landings, balconies and access platform |
| 76 | Centering and shuttering including strutting, propping etc. and removal of form work for :Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 77 | M.S. (tor steel or plain) in palin work such as RCC or R.B work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST |
| 78 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 79 | Exacavation in ordinary soil (Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 80 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 81 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortarin foundation and plinth including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 82 | 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 83 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of walls not to be less than 1 1/2 brick including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 84 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of half brick thick walls including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 85 | RCC work with cement approved coarse sand and 2cm guage approved stone grit in proportions of 1:1 1/2:3 in slabsexcluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper copmpletion of the work including cost of binding wire. the reate excludes making of drip course which shall be paid extra excluding GST. |
| 86 | M.S. (tor steel or plain) in palin work such as RCC or R.B work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST |
| 87 | 2.5cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm graded approved stone, grit, laid in panels finished with 3mm floating coat of neat cment or cement and marble dust in ratio of5:1 as specified over and including 8cm thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm guage in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish,, including supply of all materials, labour and tools & plants etc required for proper completion of the work excluding GST |
| 88 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 89 | White washing two coats including supply of all materials labour and T&P etc. required for proper completion of the work |
| 90 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer"s specification & drawing. 30 mm thick pre laminated PVC door shutters |
| 91 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollorming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm). |
| 92 | Supply and installation of fully computerized, automatic and single key operation with pop-up sprinkler system (minimum 6 nos.) having a radius of 41m at 6 bar pressure with 20mm nozzle and 11 lps discharge of water specifically designed for synthetic sports hockey surfaces including all fittings and accessories including earth work in excavation and re-filling (earth work includes 450mm of soil cover over the pipe and width of 300mm) HDPE pipe dia 150/110mm class per 100 grade 12.5kg/cm2. ""including carriage of materials within all leads and lifts and other incidental. |
| 93 | Providing & installation Tubewell boring approximate 100 meter deep , 10 hp electric pump of approved make to deliver the required water pressure along with required electrical installations and connection pipe etc. complete |
| 94 | Supply and installation of 50 HP coupled pumping set ISI marked with electronic controller make like Kirloskar / KSB / Calama etc. or equivalent, making connections suitable for Tube well / D.C.B. / open well. The job includes screwing and welding of flanges on GI B- class riser pipes, installation of Complete fittings and accessories with riser pipes, jointing of electrical cable and other connections. Layout of the same along with details of product is to be got approved by engineer. |
| 95 | Toilets cum changing rooms |
| 96 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of walls not to be less than 1 1/2 brick including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 97 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of half brick thick walls including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 98 | RCC work with cement approved coarse sand and 2cm guage approved stone grit in proportions of 1:1 1/2:3 in slabsexcluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper copmpletion of the work including cost of binding wire. the reate excludes making of drip course which shall be paid extra excluding GST. |
| 99 | M.S. (tor steel or plain) in palin work such as RCC or R.B work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST |
| 100 | Concrete with 4cm guage brick ballast fine sand of 1.25 FM and cement in proportion of 8:4:1 in foundations and under floors including supply of all materials, labour, tools & plants etc. required for proper completion of work excluding GST |
| 101 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 102 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 103 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 104 | White washing two coats including supply of all materials labour and T&P etc. required for proper completion of the work |
| 105 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer"s specification & drawing. 30 mm thick pre laminated PVC door shutters |
| 106 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollorming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm). |
| 107 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-harge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 108 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Make:Jaquar |
| 109 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Make: Jaquar |
| 110 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Make: Jaquar |
| 111 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore Make: Jaquar |
| 112 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Make: Jaquar |
| 113 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Make: Jaquar |
| 114 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter Make: Jaquar |
| 115 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 116 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 117 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes |
| 118 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 119 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 120 | Conference room |
| 121 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of walls not to be less than 1 1/2 brick including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 122 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of half brick thick walls including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 123 | RCC work with cement approved coarse sand and 2cm guage approved stone grit in proportions of 1:1 1/2:3 in slabsexcluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper copmpletion of the work including cost of binding wire. the reate excludes making of drip course which shall be paid extra excluding GST. |
| 124 | M.S. (tor steel or plain) in palin work such as RCC or R.B work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST |
| 125 | Concrete with 4cm guage brick ballast fine sand of 1.25 FM and cement in proportion of 8:4:1 in foundations and under floors including supply of all materials, labour, tools & plants etc. required for proper completion of work excluding GST |
| 126 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 127 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 128 | White washing two coats including supply of all materials labour and T&P etc. required for proper completion of the work |
| 129 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer"s specification & drawing. 30 mm thick pre laminated PVC door shutters |
| 130 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollorming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm). |
| 131 | Supply and istallation of cenference tabel of size 6mx1.8M and make should be Godrej or Geeken |
| 132 | Supply and istallation of office chairs for conference room of make Godrej or Geeken |
| 133 | ELECTRICAL WORKS Hockey Stadium |
| 134 | Supply & fixing of 30 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 135 | Supply and fixing of factory wired integral LED flood light luminaires with Modules integrated with a self supported frame work built with dirver set suitable for 1000 Watt confirming to protection class IP68 for LED Module and IP67 for LED Driver complete in all respect. |
| 136 | Supply, installation, testing and commissioning of single Dome and frame for fixing 18 no. 1000W LED Flood lights and allied accessories to complete the job as desired by Engineer incharge. |
| 137 | Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only |
| 138 | Incoming 100 Amp MCCB -1 No & Outgoning 63 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos. |
| 139 | Incoming 400 Amp. MCCB-1 Nos & Outgoning 100 Amp.MCCB-4 Nos. & 63 Amp.MCCB-1Nos. |
| 140 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade to be passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 141 | 240 sq. mm 3-1/2 core |
| 142 | 25 sq. mm 3-1/2 core |
| 143 | 16 sq. mm 4 core |
| 144 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 145 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 146 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 147 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 148 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 149 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside. Pipe is partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, modular type switch & ceiling rose/angle/batten holder on sheet etc complete in all respect as directed including matching colour wash. |
| 150 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cablein PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , modular type switch & ceiling rose on sheet etc., complete in all respect including matching colour wash. |
| 151 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash. |
| 152 | Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall and partly laid in slab alongwith thereinforcement before concreting, complete with 14 SWG copper earth continuity wire, GP Box , 15A modular type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash. |
| 153 | Supply, Transportationof energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no"s blades, 30 cm long down rod, 2 no"s canopies, shackle"kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessoriesetc., complete.Makes : Usha/ Havells / Orient/Crompton |
| 154 | Supply, Transportationof energy efficient fan, 900 rpm, 380mm sweep heavy duty exhaust fan suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessoriesetc., complete.Makes : Usha / Havells / Orient/Crompton |
| 155 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. |
| 156 | Supplying and fixing 12 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. with 63A 4P RCCB as incomer and 12 nos. 6A to 32A MCBs as outgoings complete as required. |
| 157 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 158 | 3½ X 240 sq. mm (62mm) |
| 159 | 4 X 25 sq. mm (28mm) |
| 160 | 4 X 16 sq. mm (28mm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
