|
| 1 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Group C. |
| 2 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C. |
| 3 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(i) 2x1.5 Sq. mm. |
| 4 | (ii) 2x2.5 Sq. mm. |
| 5 | (iii) 2x4.0 Sq. mm. |
| 6 | (iv) 2x10 Sq. mm. |
| 7 | Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover platefor modular switches in recess as required:-(i) 2 modules (78mmx78mmx50mm) |
| 8 | (ii) 12 modules (205mmx135mmx60mm) |
| 9 | Supplying and drawing LAN cable CAT 6E, solid copper conductorprotected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required. |
| 10 | Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required. (i) 2 Pair |
| 11 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-(i) 25 mm. dia |
| 12 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (i) S.P. 5/ 6 Amps one way Modular switch. |
| 13 | (ii) 5 pin, 5/ 6 Amps Modular socket outlet. |
| 14 | (iii) Telephone socket outlet, Modular. |
| 15 | (iv)S.P. 15/ 16 Amps one way Modular switch. |
| 16 | (v)6 pin,15/16 Amps Modular socket outlet. |
| 17 | (vi) TV. Socket outlet, modular. |
| 18 | Supplying and fixing stepped type Modular fan regulator on the existing modularbox including making connections etc. as required. |
| 19 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
| 20 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. |
| 21 | Supplying and fixing bakelite batten/angle holder including connections etc. as required:- |
| 22 | Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:- |
| 23 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- |
| 24 | Supplying and fixing copper strip bus-barssuitable for 200 Amp. 415 volts capacity4 No. each ofcross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:- |
| 25 | Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.(i) 160 Amp. -16 KA |
| 26 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(i) Single pole. Cat-A. |
| 27 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 40 Amps. Cat-A. |
| 28 | 63 Amps. Cat-A. |
| 29 | Supplyinganderection of 40/50/63 amps rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(i) Double pole. Cat-A. |
| 30 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A. |
| 31 | Supplyingand fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-(i) Double door-8 way |
| 32 | (ii)Double door-12 way |
| 33 | (iii) Double door-16 way |
| 34 | Earthing with G.Iearth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. |
| 35 | Extra for using salt and charcoal for pipe earth electrode complete as required. |
| 36 | Providing and fixing 6 SWG (4 mm dia.) G.I.wire on surface or in recess for loop earthing as required. |
| 37 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- (i) 10 Liter capacity water heater (Cat-A) |
| 38 | (ii) 25 Liter capacity water heater (Cat-A) |
| 39 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty,300 mm sweep |
| 40 | Exhaust Fan, Heavy duty, 300 mm sweep in/c fan shutter if required |
| 41 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to required length] with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan boxand earthing etc. as required:- (i) Ceiling Fan 1200 mm sweep, Category-A |
| 42 | Ceiling Fan 1400 mm sweep, Category-A |
| 43 | Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (i) Fixed type wall bracket 150 dia, single lamp.(Category-A) |
| 44 | Mirror light 610 mm, double lamp.(Category-A) |
| 45 | Supplying and fixing of bulk head fittingof all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (i) Bulk head fitting, CFL type (Category-A) |
| 46 | Providing and laying of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning,and refilling the trench etc. of the required size:-(i) Armoured cable 6 sq. mm (twin core) |
| 47 | Armoured cable 10 sq. mm (twin core) |
| 48 | Armoured cable 50 sq. mm (3.5 core) |
| 49 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts gradeon surface etc. of the required size:-(i)Armoured cable 4 sq. mm (twin core) |
| 50 | (ii)Armoured cable 6 sq. mm (twin core) |
| 51 | (iii) Armoured cable 10 sq. mm (twin core) |
| 52 | (iv) Armoured cable 50 sq. mm (3.5 core) |
| 53 | Supplying and erection offollowing depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall havecable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-The cost includes cost ofCT,ammeter, voltmeter , selector swtiches LED Lamps in/ccost of Cu strips and required wires for eachpanel/sub panel and other items required at site to the best satisfaction of engineer in charge.Themanufacturer of panel is to be got approved before fabriction along with drg and is to befabricated for mounting of accessories as per the direction and approval of engineer in charge.(i) 300 mm deep (nominal) |
| 54 | Supplying and erection of street light bracket made of G.I. pipe \"A\" class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 40 mm dia. G.I. pipe, heavy class |
| 55 | Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm dia. and of suitable depth, to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to befinished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coatcomplete in all respects as required:-(a). Overall length 7 meter, with planting depth 1.25 m, length of sections 4 m, 1.5m and 1.5m (bottom, middle and top respectively), outer dia and thickness of sections 127mmx4.5mm, 101.6mmx3.65mm and 76.1mmx3.25mm (bottom, middle and top respectively) with approximate weight 74 Kg. |
| 56 | P/FFire extinguisher Water CO2 9 KG Type-IS-15683 as approved by Engineer -in -Charge |
| 57 | P/FFire extinguisher CO2 4.5 KG Type-IS-15683 as approved by Engineer -in -Charge |
| 58 | Providing & fixing LED street light fitting ln white colour with pressure die- cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection. As per CAT no. BRTFG 72 LED/White ) complete in all respect.The fitting is to be fixed on existing bracket mounted onpole/on wall including wiring etcas required as approved and directed by engineer in charge of Bajaj/ Philips/ Havells make. |
| 59 | Providing & fixing surface/ recess mounted 12/ 15W LED fitting of Syska/Havells/Philips/ Bajaj make as required complete in all respect.(i) 9 Watt |
| 60 | (ii) 15W |
| 61 | Providing & fixing Skyluks efficient LED panel surface 4*1ft /2*2Ftof Bajaj /Syska Havells / Panasonic equivalent to Bajaj Code No. BZRSLL 36W GJI WH /NW complete in all respect fitting in ceiling as approved & directed by engineer in charge. |
| 62 | Supplying & fixing SKYLUKS LED surface mounting fitting 1\"*1\" LED luminaire panel of Bajaj/Havells/Philips/Syska20 /24WH |
| 63 | Providing & Fixing 30 W LED floodlight of Bajaj /Philips/Havells as per Bajaj CAT NO. BJFL 30W LED with suitable clamps complete in all respect of Bajaj/Philips/Havells as approved by engineer in charge. |
| 64 | Providing &fixing LED Batten integrated LED channel aluminum heat sink body of Bajaj make having Bajaj/ Havells / Syska make as below20 Watt with aluminum heatb sink body: |
| 65 | Providing and Fixing Turbo Force Wall Air Circulator Fan 600 mmconfirming to IS-2997-1964 OF Havell make double wall bearings oscillation up to 90 degree with suitable arrangementas approved by Engineer -in -Charge |
| 66 | Supplying and fixing of reputed make Light Emitting Diode of following rating as required.7-15 Watt. (phillips/ syska/or equivlent make |
| 67 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
