Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-12-2021 | Development of Pedestrian Spine and Revitalization of Patto Area - Open Spaces at Central Library, EDC, Island, Area along Government Quarters and Foot Bridges (Civil and Electrical works) | Other | 22-12-2021 |
| Sl. No. | Item Description |
| 1 | SITE CLEARING |
| 2 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 3 | Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceablematerialanddisposalofunserviceable material for all leads :(a) Beyond 30 cm and upto 60 cm girth |
| 4 | Clearing jungleincludinguprootingofrank vegetationgrassbushwoodtreesandsaplingof girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however, only grass is met with the area will be measured and paid for under item 4001). |
| 5 | FOUNDATION PILES |
| 6 | Boring holes vertically true to line and form for R.C.C.boredpilesofrequireddiameterinall strata except hard rock including removing slush, allkindsofsoilandrock, percolating wateretc.completefromtheabovetokeep readyforconcreteafter placingreinforcement butexcludingthecostofprovidingandlaying concrete and reinforcement. 600mm dia bore : (i) upto 12m from ground level |
| 7 | (ii) Above 12m but upto 15m depth add 5% |
| 8 | (iii) Above 15m and upto 18 m depth add 5% |
| 9 | (iv) Above 18m but upto 21m depth add 5% |
| 10 | (v) Above 21m but upto 24m depth add 5% |
| 11 | Providing and laying reinforced cement concrete ofgradeM35 (mixdesign)withcoarsesand and graded granitic or basaltic aggregate 20mm nominal size as per mix design requirementsin bored piles of specified diameter at the required workability and compaction as per the direction of the Engineer-in-charge including all operation forplacingtheconcrete,liftingthecasingin stages etc. but excluding the cost of reinforcement.600mm dia pile : (i) upto 12m from ground level |
| 12 | (ii) Above 12m but upto 15m depth add 5% |
| 13 | (iii) Above 15m and upto 18 m depth add 5% |
| 14 | (iv) Above 18m but upto 21m depth add 5% |
| 15 | (v) Above 21m but upto 24m depth add 5% |
| 16 | Conducting low strain pile integrity test on RC bored pile foundations using pile integrity tester equipment manufactured by pile dynamics inc. of USA or TNO of Netherlands, conforming to ASTMD-5882. |
| 17 | Providing Steel Liner 6mm thick for Piles including Fabricating and Setting out as per Detailed Drawing |
| 18 | Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA. VIZAG only)(Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floorsalong with factory made precaste concrete cover blocks of specified sizes whose compressive strengthis not less than that of surrounding concrete in the structural member. |
| 19 | EARTHWORK |
| 20 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction ofshoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)Marshy soilupto 3 m depthMechanical means |
| 21 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth inlayersnotexceeding20cmdepthconsolidating eachlayerrammingandwateringleadupto50M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 22 | Supplying and filling in plinth under floors, trenchesincludingwateringrammingconsolidating, dressing, complete.(i) sand |
| 23 | (ii) moorum |
| 24 | CONCRETE PLAIN AND REINFORCED |
| 25 | Providingandlayinginpositioncement concrete1:2:4(1cement:2coarsesand:4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost ofcentering,shuttering and finishing :(a) All works upto plinth level |
| 26 | Providingandlayingplumconcreteincement concrete 1:2:4 (1 cement: 2 coarse sand:4 gradedWith laterite stone plum )withplumsnotexceeding 15%ofthevolumeofthefinishedconcreteof sizerangingfrom150to300mm(butthe maximumdimensionnotexceeding1/3rd (one third)theleastdimensionofmemberunder considerationexcludingthecostofcentering and shuttering in foundation and plinth. |
| 27 | Providingandlayinginpositionready mixed concrete (RMC)with usage of Ground Granulated Blast Furnace Slag (GGBS)as per IS 12089andIS456-2000manufacturedinfully automatic batching plant and transported to site of work intransitmixer for alead upto 20 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the siteoflaying,excludingthecostofcentering, shuttering, finishing and reinforcement includingthecostofadmixturesin recommendedporportionsasperIS:9103to accelerate/retardsettingofconcrete,improve workabilitywithoutimparingstrengthand durability as per the directions of the engineer-in-charge. All works upto floor V level.(i) M-15 grade of concrete |
| 28 | (ii) M-30 grade of concrete |
| 29 | Providing and laying in positionmachine batched concrete(BMC),machinemixedand machine vibrated design mix cement concrete of specifiedgradeforreinforcedcementconcrete workincluding pumping of concreteto thesite oflayingbutexcludingthecostofcentering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the directionoftheEngineer-in-charge. M30 grade of reinforced cement conrete by using 410kg of cementpercu.m.ofconcrete.Allworksupto floor V level. |
| 30 | Skate park Finishes: Laying skate park concrete which should be finished in three stages by using wooden floats, magnisium floats and finally steel trowels to get high quality surface finish complete as per the instruction of Engineer in charge. |
| 31 | REINFORCING STEEL |
| 32 | Providing corrosionresistantsteel CRS-50 bars of(SAIL, TATA, VIZAG,JSWSteel Ltd.) (ConfirmingtoIS1786if1985)forRCC workincludingbending,binding&placingin position in all the floorsalong with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surroundingconcreteinthestructural member. |
| 33 | FORMWORK |
| 34 | Centering & shuttering including Strutting,Propping &removal of forms for :(i) Foundations, Footings, Bases for columns |
| 35 | (ii) Verticalsurfacessuchasretaingwalls,return walls, Partitions, walls (any thickness) including attachedPilasters,Buttresses,Plinthandstringcourses, Fillets and the like |
| 36 | (iii) SidesandSoffitsofbeams,BeamHaunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 37 | (iv) Suspended floors, roofs landings, shelves & their supports |
| 38 | Centering&shutteringincludingStrutting, Propping&removalofformsforslopingor battering surface (slabs, beams, louvers, etc) including folded plates. (a) Columns, Pillars, Posts & struts (circular or curved in plan) |
| 39 | Providing and laying in place Decking sheet, minimum yield stress 500 MPa ,1.2 mm thick, over steel floor beams at all levels, with stitching the side laps with seal and tapping screws 15mm long@ 660mm center to center. The decking sheet shall be hot diped galvanised with zinc coating of 275 GSM on both sides of the deck etc complete as directed by Engineer in charge. |
| 40 | Providing and laying in place Decking sheet Edge Trim of 0.7mm thick galvanised at 275 GSM with a total girth of 450-500 mm with restrain strap at 600 mm centres approximately as directed by Engineer in charge, etc. complete. |
| 41 | MASONRY |
| 42 | Rubblepackingwithhardlateritestoneunder floorsincludingwateringrammingand consolidatingetc.inpipelinetrenchesandother foundations complete. |
| 43 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand)in foundation and basement. |
| 44 | Exposed decorative laterite masonry using Patradevistoneofsizeasspecifiedandlaidas directedbyarchitectincementmortar1:4(1 cement : 4 coarse sand) |
| 45 | ProvidingandlayingAutoclaveAeratedcement blocks masonry (Light Weight Foam Concrete Blocks)with100mmthickAACblocksinsuper structure above plinth level up to floor V level in proprietary synthetic cement mortar. The rateincludesprovidingandplacinginposition2 Nos6mmdiaM.S.barsateverythirdcourseof masonry work. |
| 46 | PLASTERING & POINTING |
| 47 | 12mmcementplaster1:3(1cement:3fine sand) |
| 48 | Providing and doing 20mmcementplaster1:3(1cement:3fine sand) by adding water proofing material proportionrecommendedbythe manufacturers. |
| 49 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 50 | PAINTING |
| 51 | Providingandapplying Wall painting (two or more coats) with plastic emulsion paintover whitecementbased putty of average thickness 1.00mm and applying one coat of cement primer of approved brand and manufacture on new work to give an even shade. |
| 52 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatmentetc. complete. |
| 53 | STRUCTURAL STEEL |
| 54 | Providing, Fabricating and erecting in position at all heights and depths above and below finished ground level, alignment, levelling, welding/bolting of structural steelworkas specified but not limited to all members of building structures such as all types of columns,bracings, roof legs,platforms, roof trusses, purlins, lacings, inserts, stiffeners, side and gable runners, beams,floor & platform supports, staircases, sag rods and tie rods including, all gusset plate, cleat angles,cladding runners ,threading, nuts, washers etc., and all other miscellaneous structural steelwork as specified and as shown on drawings and/or as directed by the Engineer In Charge with all contractor\"s materials, labours, tools, cranes, plant, machineries, consumables etc. including supplying and fixing connection/erection boltsas specified, nuts, washers, fittings, fixtures etc. complete in all respect and to the satisfaction of Engineer In Charge. E 7018 welding electrodes of approved make as specified should be used.Blast cleaningto SA 2 1/2 standard and cleaning with dry cloth.Protective coating shall be ZINC ALUMINIUM METALLISATION.This shall comprise of application of Zinc (85%),Aluminium (15%) spray applied alloy with sealer coat (150 microns zinc aluminium coating+ 5-10 microns sealer coat)followed by 2 coats of PU paint finish. Metallisation shall be as per specifications and PU paint shall be as per manufacturers specifications .All fabrication works shall be carried out in fabrication shops to be approved by engineer in charge.etc. complete.On ground - RHS/SHS YST-310 (TATA STRUCTURA)) |
| 55 | On ground- RHS/SHS YST-250 (TATA STRUCTURA)) |
| 56 | On ground- Rolled Section E 250 |
| 57 | On water- RHS/SHS YST-310 (TATA STRUCTURA)) |
| 58 | SHEETING & ACCESSORIES |
| 59 | Supply & Installation Zinc Standing Seam Insulated Roofing System with with following specification. Top panel of 0.7mm thickness , Stainless Steel 304 Sliding & Fixed Clips, 100mm wide plain GI Strips, Synthetic Mesh - Anti-abrasive breathable membrane, Bare Galvalume Low Rib corrugated sheet having 0.47mm TCT, 1.5mm thick Galvanised Steel Z girt section , 100mm thick 64kg/m3 density Rockwool Insulation Layer with VCL, Hi-rib colour coated Galvalume sheet having 0.5mm TCT with 550MPA tensile strength and AZ 150gm/sqm coating complete as per direction of Engineer in charge. etc. complete. |
| 60 | Supply & Installation charges for the Zinc flashingswith following girth complete as per direction of Engineer in charge.(i) Girth up to 166mm. |
| 61 | (ii) Girth up to 333mm. |
| 62 | (iii) Girth up to 500mm. |
| 63 | Providing and fixing automatic Turbo air ventilator of Aluminium material of 600 mm diameter and 450 mm hight to be fixed on roof complete as per the directions of Engineer in charge. Etc. |
| 64 | DOORS & WINDOWS |
| 65 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer)Door Shutter Manufacture,SupplyandInstallation(including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer)doorshutterofspecifiedthicknessas peroptionsbelowbyusingtraysystemwith seasonedhardwood,moisturelessthan17%, woodenstylesforToprailandlockrails.FRP (Fiber Reinforced Polymer) laminate made up of 450gramspersq.mts(gsm)chopstrandmatt andunsaturatedpolyesterresinwithviscosity rangeof400/450centipoisespersecond(cps) and printed matt having woodentexturesusedalongwithUVResistant resintogivethecleartextureonthedoor.The core of shutter will befilled with MR 2nd grade Block Board.TheShuttertobewaterproofas well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certifiedfactory.Accessories:i) S. S. Hinges 4” - 3 Nosii) S. S.Latch- 1 Noiii) Tower Bolt 5”- 2 Nosiv) Handle 5”- 2 Nos(b) 35 mm |
| 66 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x2mmandbracedwithflatirondiagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia.Steel pullyscompletelyboltslockingarrangement, stopper,handlesincludingapplyingapriming coat of red lead paint. |
| 67 | Supplyingandfixingrolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entirelength andjointedtogetherattheendbyendlocks mounted on specially designed pipe shaft with brackets, side guides and arrangements for insideandoutsidelockingwithpushandpull operationcompleteincludingthecostof providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutter stop cover and spring. |
| 68 | Providing and fixing of Aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with purepolysterpowderofthickness15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc. |
| 69 | Providing and fixing of top hung openable ventilator with aluminium sections outer frame sections made of size 45mm x 47mm, shutter section made of size 52 x 67mm, glazed with round clip of size 27mm x 25mm duly color anodized to 20mm microns thickness, 5mm thick frosted glass with friction stay hinges, single point handle and silicon sealant etc. complete. |
| 70 | FLOORING |
| 71 | Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishingcomplete with base of cement mortar 1:4 (1 cement: 4 coarse sand) |
| 72 | Kotahstoneslabflooringover25mmthickin risersofsteps,skirtings,dado&pillarslaidon 12mm(average)thickcementmortor1:3(1 cement:3coarsesand)&jointedwithgrey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 73 | Providing and fixing Kota stone tread tiles 35mmthickinsinglepiecewithroundedof nosingantiskidgroovelaidonandincluding 20mm (average ) thk bed of cement slurry includingpointingwithpigmentedcement slurrytomatchtheshadeoftheslab,cleaning etc. complete. |
| 74 | Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 75 | ProvidingandfixingVitrifiedtilesindifferent sizes(thicknesstobespecifiedby manufacturer),with water absorption less than0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting,riserofstepsanddados,jointingwith [email protected],including pointing/groutinginwhitecementmixedwith pigment of matching shade complete.(b) 600 x 600 mm - light Shades |
| 76 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 77 | Providing and fixing Second class Indianteak wood plank in flooring andbacking forincludingfixingwith SS316 grade screws complete. |
| 78 | Combination of Cuddappah and Kotah stone slab 25mm thk. machine cutflooring over 20mm (average) thicknessof cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurryto form the paving pattern as per architectural drg. |
| 79 | Providing20mm thickJet black graniteslabtourinal partitions with cement complete |
| 80 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compactionandofaprpovedsizeanddesign/ shapelaidin50mmthickcompactedbedof coarsesand,fillingthejointswithcoarsesand, etc.allcompleteasperthedirectionof Engineer.-inI,Wave,Rectangular,Squareetc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be doneusing0.4-0.5mmdiasteelshotswithaspeed of 3200 rpm.(a) 80 mm thick in grey colour (M40 grade) |
| 81 | Providing and fixing 18 mm thick gang saw cut, mirrorpolished,premouldedandprepolished, machinecutforkitchenplatforms,vanity counters,windowsills,faciasandsimilar locations of required size, approved shade, colourandtexturelaidover20mmthickbase cementmortar1:4(1cement:4coarsesand), jointstreatedwithwhitecement,mixedwith matchingpigment,epoxytouchups,including rubbing, curing, moulding and polishing to edges togivehighglossfinishetc.completeatall levels.Graniteof Jet Black colour and shade,areaof slab over 0.50 sqm |
| 82 | Providing and fixing Jet black Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 83 | Providing and fixing10mm Hand Painted vitrified tilesin floorson 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 84 | Providingandlaying25mmshahabadstone flooringon ground complete. |
| 85 | Painting 2 coats with oil type wood preservativeofapprovedbrand&manufacture on new work. |
| 86 | Paint+B83:B98+B93:B98ing 1 coatwithoil type woodpreservative of approved brand & manufacture on old work once in a year for 4 years after completion during defect liability period. (payment will be made yearly after completion.) |
| 87 | DISMANTLING DEMOLISHING & REPAIRS WORK |
| 88 | DemolishingR.C.C.workincludingstackingof steel bars & disposal of unserviceable within 50 mts. lead. |
| 89 | Demolishinglateritestonemasonryincement mortar including stacking of serviceable material&disposalofunserviceablematerialwithin 50 mts. lead. |
| 90 | Dismantlingsteelworkinbuiltupsectionsin angles, tees, flats and channels including all gussetplatesbolts,nuts,cuttingdismembering and staking within 50 mts. lead |
| 91 | Dismantlingthetileworkinfloorsandroofs laid incementincludingstackingofmaterials within50metersleadforthicknessoftiles 10mm to 25mm. |
| 92 | Dismantling G.I. sheets roofing includingridges, hipsvalleysandguttersetc.andstackingthe material within 50 meters lead. |
| 93 | MISCELLANEOUS |
| 94 | Providing & fixing bevelled edge mirror of superiorglass(5mmthk)ofapprovedQuality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete. |
| 95 | ProvidingPre-construction anti – termitetreatment tobuildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from thedateof completionincluding eradicatinganyinfestationoftermitefreeof cost during the guaranty period complete. (The payment will be made on plinth of the building. |
| 96 | Providing and fixing stainless steel (Grade 316)Matt finished railing / Fencing/benches/double pole hanging swinging type tilted cover dust bins madeofHollowtubes,channels,plates etc.withhairlinefinish,includingwelding, grinding, buffing, polishing and making curvature(whereverrequired)andfittingthe samewithnecessarystainlesssteelnutsand bolts complete, i/c fixing with necessary accessories & stainless steel dash fasteners,stainlesssteelboltsetc.,ofrequired size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight ofstainlesssteelmembersshallbeconsidered excludingfixingaccessoriessuchasnuts,bolts,fasteners etc.) as per drawing and technical specifications. |
| 97 | Providingandfixing prefabricatedcompound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements,pintals,holdfastembeddedin cement concrete 1:2:4 (1 cement: 2 coarse sand : 4graniticorbasaltic aggreate20mmnominal size) including applying priming coat with ready mixedredleadpaintandpainting2ormore coats with superior ready mixed paint of approvedbrandandmanufactureinallshades as per direction complete. |
| 98 | Providing and fixing in position MS grills for windows, ventillators made from MS sections like square bars, tubes, flats as per design and specifications with 1 coat of Zinc Chromate primer & 2 coats of synthetic enamel of required shade etc. complete. |
| 99 | Providing & Fixing Signage of SS 316 grade 3mm thick. Laser cutting, bending and provision for tubelight fitting and engraving with raised lettering using UV printing process. Installation using SS studs as directed by engineer incharge. etc. complete. |
| 100 | Painting(one or more coats) for Electrical works, Play euipments, Open air gym Equipments & Bencheswith synthetic enamel paintof approvedbrandand manufacture in all shades on old work to give an even shade once in a year for 5 years after completion during defect liability period. |
| 101 | Supplying 2 Labourers per day and maintaining the site and toilets work for 5 yrs after completion during defect liability period (payment will be made yearly after completion.) |
| 102 | PLAY AREA EQUIPMENTS |
| 103 | Supply and installtion of Stand Alone Spring Rider of different shapes made of G.I. pipe and G.I. spring ,fibre glass reinforced plastic of top polyester resin and virgin quality standard glass, rational moulded plastic made up of non ageing food grade and non toxic material with uv stabilizer and completeas per the instructions of Engineer incharge. |
| 104 | Supply and installation of Slides made of GI pipe and FRP galavanised steel pipes for center support,ladder and handrails, FRP sheet for slide and side arm made up of fiber reinforced plastic with reinforced platform height as per the and completeas per the instructions of Engineer incharge. (i) 5\" height |
| 105 | (ii) 8\" height wave slide |
| 106 | (iii) 12\" height |
| 107 | Supply and installation of Double Post swingmade of Galvanized steel pipes and rubber, dip molded swing chain of dia. 6mm, 1450mm long, rubber seat made by natural rubber with sufficient reinforcement and completeas per the instructions of Engineer incharge. |
| 108 | Supply and installation SEE SAW, lever made from 80nb gi pipe of 2950mm long with strong load carrying capacity, stand with special nylon-6 bush enclosed in a seamless pipe hinged to 50nb support pipe. seat is made from rotational moulded material seat with grip and completeas per the instructions of Engineer incharge. (i) single |
| 109 | (ii) double |
| 110 | Supply and installation Bar Climber of size 12\"x2\"x10\", made of GI PIPE and completeas per the instructions of Engineer incharge. |
| 111 | Supply and installation of Rope Climber of size 6 x 4 x 6ft made of GALAVANISED STEEL PIPES AND Nylon rope complete as per the instructions of Engineer incharge. |
| 112 | Supply and fixing Benches of size 1.5 x 0.4 x 0.75m ht made of Cast Iron with T.W. Wooden stripsand completeas per the instructions of Engineer incharge. |
| 113 | Supply and installtion of Double bar/Parallel bar of size1.8M x0.45mx1.37 ht made of 50mm C class G.I. pipe, PU paintedand completeas per the instructions of Engineer incharge. |
| 114 | Supply and installtion of Roman Rings of size 1.06m length, 4.42m made of 50mm C class G.I. pipe painted,SS304 grade chain, with heavy duty bearingand completeas per the instructions of Engineer incharge. |
| 115 | Supply and installtion of Sky Walkersingle personof size1.06m0.38mx1.52m ht made of G.I. pipe painted, FRP foot rest with heavy duty bearingand completeas per the instructions of Engineer incharge. |
| 116 | Supply and installtion of Leg PressDouble Seater (squat pushing)of size1.8mx0.45mx1.8m ht made of G.I. pipe painted, FRP seat and foot rest,with heavy duty bearingand completeas per the instructions of Engineer incharge. |
| 117 | Supply and installtion of Single shoulder Wheel double person of size 0.91x0.3mx1.52m made of G.I. pipe painted, FRP seat and foot restwith heavy duty bearing and completeas per the instructions of Engineer incharge. |
| 118 | Supply and installtion of Seated chest Press Double person of size1.67mx0.68x2.13mmade of G.I. pipe painted, FRP seat and foot rest with heavy duty bearingand completeas per the instructions of Engineer incharge. |
| 119 | Supply and installtion of Push Up bar of size0.91mx0.45m made of G.I. pipe and completeas per the instructions of Engineer incharge. |
| 120 | Supply and installtion of Exercise Bike of size0.76mx0.30mx1.20m made of G.I. pipe painted, FRP seat with heavy duty bearingand completeas per the instructions of Engineer incharge. |
| 121 | Rebate for taking all types of steel items including carting away, loading, unloading etc. Complete |
| 122 | ProvidingandfixingvitreouschinaUnder Counter washbasin withRSorC.I.bracketspaintedwhite,15mm C.P. Jaquar make pillar tap, C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap, 32mm jaquar make Bottle trapand union complete, including cutting and making good the walls where required. |
| 123 | Provingandfixingwhitevitreouschinawater closetsquating(Europeantypew.c.pan) with white plastic seat and lid , C.P.brasshinges andrubber buffers 10 lts. Highlevel P.V.C..flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials&mosquitoproofcouplingof approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required. |
| 124 | Providingandfixingwhitevitreouschinaflat back Large lipped front urinal basinof 590x375x390mmsizewithUrinalValveAuto closing system with built in control cock & wall flangewithfittings,spreader,R.S.orC.I. brackets, standard size C.P. Brassl flush pipe and spreaderswithC.P.brassunions&C.P.Brass clampswithwastefittingasperIS2556,PVC trapwithoutletgratingandothercouplingsin CPBrasscomplete,includingpainting,fittings, cuttingandmakinggoodthewallsandfloors where required. - Range of one urinal basin |
| 125 | Providing and fixing NICKEL chrome plated copperalloyFancy20mm nominal bore angularstopcockwith sheetflance 20mm Jaquar makeor equivalent. Confirming to IS 8931;1993 |
| 126 | Supplying and fixing in position CP coat hooks (double horn hook) etc. complete as directed & to the satisfaction of Engineer-in-charge of work. |
| 127 | Providing & fixing liquid soap container with C.P. brass lid and brackets fixed to wooden cleats with C. P. brass screws (b) Plastic container |
| 128 | Providing & fixing c.p. brass towel rail complete withC.P.brass bracketsfixedtowoodencleats with C. P. brass screws |
| 129 | Providing and fixing two waylong body bib cock with Hand Shower (Health Faucet)with8mmdia,ABS/brassbodywith doublelock1.00mlongFlexibletube(Brass plated stainles steel flexible hose) and wall hookof approved quality confirming to IS standards. |
| 130 | Making connectionofG.I.Distributionbranch with G. I. Main 50 mm to 80 mm nominal bore byprovidingandfixingteeincludingtreading the pipe etc. complete |
| 131 | Supply and Fixingof Class B-Multi Jet Water meter 25mm Dia inferential,drydial & stop cock inPipe line including cutting & threading the pipe etc, suitableforhorizontalinstallation,duly,sealed againsttamperingwithcouplingsatbothendshaving pulseoutputfacilitycompatableforautomaticreading system ,conforming to IS:779-1974 and ISO 4064-2005 standardsandbearingEEC/MID/OIML mark,(with latest Amendments)along with test certificate from FCRI/NABL as desired by the department complete. |
| 132 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testingofjointscompleteasperdirectionofEngineer.Internal work - Exposed on wall.I - SCH-80(blue)/(white)(i) 20mm outer dia. |
| 133 | (ii) 25mm outer dia. |
| 134 | (iii) 40mm outer dia. |
| 135 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with onestepUPVCsolventcement,trenching, refilling & testing of joints complete as per direction of Engineer. External work.I - SCH-80(blue)/(white) (i) 20mm outer dia. |
| 136 | (ii) 25mm outer dia. |
| 137 | (iii) 40mm outer dia. |
| 138 | (iv) 50mm outer dia. |
| 139 | Providing&fixing 50 mm nominal diaG.I.pipescompletewithG.I. fittings including trenching & re-filling etc. (external work). |
| 140 | Providingandfixingchlorinatedployvinyl chloride(CPVC)pipesconfirmingtoIS:15778, havingthermalstabilityforhotandcoldwater supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing.This includes jointing of pipesandfittingswithonestepCPVCsolvent cementandtestingofjointscompleteasper directionoftheEngineer-in-charge.Concealed work(mediumdutySDR13.5pipe)including cutting chases and making good the walls etc.(i) 15 mm dia nominal outer dia pipes. |
| 141 | (ii) 20 mm dia nominal outer dia pipes. |
| 142 | (iii) 25 mm dia nominal outer dia pipes. |
| 143 | Providing and fixing brass full way valve (heavy) duty with wheelof approved quality :(i) 20 mm nominal bore |
| 144 | (ii) 25 mm nominal bore . |
| 145 | (iii) 40 mm nominal bore |
| 146 | Providingandfixingnon-returnvalveof approved quality :(a) 50 mm nominal bore |
| 147 | Providing and installing a set of 2 Hydro Pneumatic centrifugal pumps (1 working +1 stand by) with 2900 RPM Floor mounted minimum head shoud be 38m icluding suction and discharge manifold, anti vibration pad, NRV, Isolating valve, Pressure switch, dry run protection, control valve, auto change over, low level indicator, indivisual pump on off/ trip indicator, aoyo/ manual operation with pressure tank 100 ltr 10 bar complete as per the instruction of Engineer incharge. |
| 148 | Providingandplacing Underground water storage tank rotational moulded polythene water storage tank having I S I mark and conforming toI S 12701; 1996. |
| 149 | PLUMBING |
| 150 | Supplying & fixing 110 mm dia heavy duty, approved quality, P.V.C Nahani Trap with 75 mm dia outlet, fixing the trap in P.C.C (1:3:6), cutting floors or concrete surfaces, restoring the same to original condition includingsupplying & fixing 125 mm C.P grating of approved make etc. complete as directed & to the satisfaction of Engineer-in-charge of work. |
| 151 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes ofapproved including lubricant etc. complete (single/double) socketed:i. 110 mm dia |
| 152 | ii. 75 mm dia |
| 153 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with onestepUPVCsolventcement, including chasing the walls and making good&testingofjointscompleteasper direction of Engineer. Internal work. I - SCH-80(blue)/(white) (a) 40mm outer dia. |
| 154 | Supplying, ofHDPEpipesatstoreorsiteofwork including loading unloading, stacking, transit insurance etc.completebearingISImark&conformingtoIS: 4984-1995&madefromPE100resinClassIV(10 kg/cm2) , Conveyingcarefullyfromstackatsite,250mfrom bothsidesrollingandloweringintrenches,laying true toline and level and perfect linking forjoints for P.V.C/H.D.P.E, including fabricating /moulding HDPE pipe fittings/specialsasperrequiredPressureclassofHDPE Pipes,conformingtoIS:8360(PartI&III)and IS:8008(PartItoIX).TheHDPEpipefittings/specials shall be manufactured from virgin resin PE100, Jointing of HDPE pipes by heating the two ends of the pipewithelectricallyheatedmirror, totherequired temperature,includingthehirechargesofheating mirror and the generator set for the electricityfor the heating mirror, HydraulictestingofpipelineasperCLAUSENO 6.4.4ofCPHEEOMANUALonwatersupplyand treatment, a to the required test pressusre by providing all work force,materials, reciprocating pump, pressure gauge, includingthecostofwaterrequired, maintaining the test pressure for a period of 24 hours fromthetimethepipelinehasattainedthe test pressureforsuccessfultesting,asperthestandards, and maintaining the records of hydraulic test as required as per the direction of the engineer in -charge For HDPE pipeline etc complete as per the direction of the engineer in- charge.Outer dia. in mmDia in mm(h) 160 |
| 155 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design. Including excavation complete. 150 x 100 mm size –P or S type. |
| 156 | Constructing brick masonry manhole or inspectionchamberwithsecondclassbricksin cement mortar 1:5 (1 cement :5 fine sand) R.C.C.top slab with 1:1 1/2:3 mix (1 cement: 1 1/2 coarse sand;3gradedstoneaggregate20mm nominal size foundation concrete 1:1 1/2:3 mix (1cemet;11/2coarsesand:8gradedstone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement:3coarsesand)finishedwithafloatingcoatof neatcementandmakingchannelsincement concrete1:2:4 mix(1cement:2 coarsesand:4 gradedstoneaggregate20mmnominalsize) neatly finished complete as per standard design.(i) Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internaldimensionstotalweightofcoverand frame to be not less than 38 kg. (weight of cover 23 kg.) |
| 157 | (ii) Inside size 60 x 60cmand 60cm deep including C.I.coverwithframe(lightduty)455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 158 | Extra for depth for manholes : a) size 90 x 80 cm |
| 159 | Makingconnectionofdrainorsewerlinewith existingmanholesincludingbrakingintoand making goodthe walls, floors withcement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 gradedstoneaggregate20mmnominalsize) cementplasteredonbothsideswithcement mortar1:3(1cement:3coarsesand)finished with a floating coat of neat cement and making necessary channels for the drain etc.complete: For pipe 100 to 150 mm dia. |
| 160 | Cuttingthebituminousroadforlayingthepipelinein trenchesforawidthof0.6m includinglabour,tools etc,anddisposingtheexcavatedexcessmaterialfrom thetrenchtoadistanceof1000metres,including making level the trench surface by utilising the serviciablematerialtothelevelofthetopsurfaceof road,bycompacting,wateringrammingwithrolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer incharge.By Manual Means :(a) District Road, State highways, National highwayand roads of similar standards |
| 161 | Repairs and reinstatementto the road for trenches made by laying water supply pipeline, by removing the refilledmaterialinthetrench forthe totaldepthof 0.42m and making good the road surface by providing layingrollling byroadrollercompacting forlaterite soling30cmthick,twolayeroffullgroutof50mm thick each, tack coat and open graded premix carpet of 20mmthicknessasperspecificationsmentionedin itemnos14086,14093,14051&14068ofroadGSR respectively,complete asperthedirectionofthe engineer incharge.(a) District Road, State highway, National highway and roads of similar standards |
| 162 | PLUMBING |
| 163 | Providing and fixing chrome plated Nozel adapter complete with all accessories. |
| 164 | Supplying, ofHDPEpipesatstoreorsiteofwork including loading unloading, stacking, transit insurance etc.completebearingISImark&conformingtoIS: 4984-1995&madefromPE100resinClassIV(10 kg/cm2) , Conveyingcarefullyfromstackatsite,250mfrom bothsidesrollingandloweringintrenches,laying true toline and level and perfect linking forjoints for P.V.C/H.D.P.E, including fabricating /moulding HDPE pipe fittings/specialsasperrequiredPressureclassofHDPE Pipes,conformingtoIS:8360(PartI&III)and IS:8008(PartItoIX).TheHDPEpipefittings/specials shall be manufactured from virgin resin PE100, Jointing of HDPE pipes by heating the two ends of the pipewithelectricallyheatedmirror, totherequired temperature,includingthehirechargesofheating mirror and the generator set for the electricityfor the heating mirror, HydraulictestingofpipelineasperCLAUSENO 6.4.4ofCPHEEOMANUALonwatersupplyand treatment, a to the required test pressusre by providing all work force,materials, reciprocating pump, pressure gauge, includingthecostofwaterrequired, maintaining the test pressure for a period of 24 hours fromthetimethepipelinehasattainedthe test pressureforsuccessfultesting,asperthestandards, and maintaining the records of hydraulic test as required as per the direction of the engineer in -charge For HDPE pipeline etc complete as per the direction of the engineer in- charge.Outer dia. in mmDia in mmi. 50 |
| 165 | ii. 63 |
| 166 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testingofjointscompleteasperdirectionof Engineer.Internal work - Exposed on wall.I - SCH-80(blue)/(white)i. 20mm outer dia. |
| 167 | Providing and installing a set of 2 Monoblock water transferpumps (1 working +1 stand by) 7.5 HP 3 PhaseFloor mounted minimum head shoud be 42-53 m. Casing, impeller and motor body should be of cast iron icluding suction and discharge manifold, anti vibration pad, NRV, Isolating valve, Pressure switch, with automatic control panel , 2 nos float switch for dry run protection, control valve, auto change over, low level indicator, indivisual pump on off/ trip indicator, auto/ manual operation, overload protection pressure switch and timer operated, pressure gauge, bushescomplete as per the instruction of Engineer incharge. |
| 168 | Providing and fixing brass full way valve (heavy) duty with wheelof approved quality : i. 20 mm nominal bore |
| 169 | ii. 50 mm nominal bore . |
| 170 | iii. 65 mm nominal bore . |
| 171 | Providingandfixingnon-returnvalveof approved quality :(i) 65mm nominal bore |
| 172 | LT Cables & Terminations |
| 173 | Supply of 4 core armoured PVC/XLPE insulated, PVCsheathed aluminium conductor cable of 1.1 KV gradewith ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of followingsize.4 Core 16 sq.mm |
| 174 | Supply of3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm |
| 175 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required.(5) 4 x 16 Sq. mm. |
| 176 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required.(2) 3 x 4 Sq. mm. |
| 177 | Supply of3 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.(i) 3 Core 4 sq.mm |
| 178 | Supply of3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (a) 3 Core 4 sq.mm |
| 179 | Supply of3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (i) 3 1/2 Core 95 sq.mm |
| 180 | (ii) 3 1/2 Core 50 sq.mm |
| 181 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required.(i) (5) 3 1/2x 95 Sq. mm. |
| 182 | (ii) (3) 3 1/2x 50 Sq. mm. |
| 183 | Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata |
| 184 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct,etc.complete as required |
| 185 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 186 | Laying of one number PVC insulated and PVCsheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick ,protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 187 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata |
| 188 | Supplying & laying (including excavation) 15 cm diaRCCHumepipewith coupling collar of standard thickness at required depth up to 90 cm below road / groundsurface,forenclosing providedcable&necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). |
| 189 | FEEDER PANELS |
| 190 | Feeder Panel 1Supply,installation,testing and commissioning of outdoor type feeder Panel as specified and complete with :a)Tinned copper busbars b) 7 tank pre-treatmentc) Oven baked epoxy paint finish - RAL 7032d)3 nos. 6 A SP MCB , 1Nos 16 A TP MCB for control circuit, Internconnections, earthing etc.e)1 nos Digital Voltmeter and ammeter with CTs and selector switches with protection.f) 1 nosRYB indicating lamps LED type.g)1 nos. 40A TP MCB With 3 phase meter box sealable h)1 nos. 25A 4P RCCB i)3 nos. 20 A TP MCBj)13 nos. 10 A SP MCBk)4 nos -4 pole power contactor 440V 16A for time switchl) 4 nos-No Programmable Digital Almanac Timer Micro-controller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230/250V / 10A with 10 Hrs battery backup and manual over drive facility capable to drive different capacity contactors timerm)surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase andneutral |
| 191 | Feeder Panel 2Supply,installation,testing and commissioning of outdoor type feeder Panel as specified and complete with :a)Tinned copper busbars b) 7 tank pre-treatmentc) Oven baked epoxy paint finish - RAL 7032d)3 nos. 6 A SP MCB , 1Nos 16 A TP MCB for control circuit, Internconnections, earthing etc.e)1 nos Digital Voltmeter and ammeter with CTs and selector switches with protection.f) 1 nosRYB indicating lamps LED type.g)1 nos. 40A TP MCB With 3 phase meter box sealable h)1 nos. 25A 4P RCCB i)13 nos. 10 A SP MCBj)3 nos. 20 A TP MCBk) 4 nos -4 pole power contactor 440V 16A for time switchl) 4 nos-No Programmable Digital Almanac Timer Micro-controller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230/250V / 10A with 10 Hrs battery backup and manual over drive facility capable to drive different capacity contactors timerm) surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase andneutral |
| 192 | Feeder Panel MFPSupply,installation,testing and commissioning of outdoor type feeder Panel as specified and complete with :a)Tinned copper busbars b) 7 tank pre-treatmentc) Oven baked epoxy paint finish - RAL 7032INCOMMER125A TP MCCBOUTGOING63A TP MCB-2 NOS40A TP MCB-5 NOS20A TP MCB-10 NOS |
| 193 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft blackagriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately).(a) In soily strata |
| 194 | Extra for using salt and charcoal for GI or copper plate earthelectrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) |
| 195 | Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required |
| 196 | Supplying and laying 25 mm x 6 mm GI strip at 0.5 mbelow ground as strip earth electrode including soldering etc. as required |
| 197 | Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB |
| 198 | Supplying and erecting highbay LED fitting IP 65 with lamp 70W-80W, PF >0.95duly connected complete with accessories as per specification no. FG-ODF/LED |
| 199 | Supplying and erecting bulkhead fitting suitable for upto LEDupto 12W fixed on wall. As per specification no. FG-IDF/BHF |
| 200 | Supplying and fixing brass batten/ angle holderincluding connections etc as required. |
| 201 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 202 | Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.luminaire by disconnecting starter & ballast if necessary. |
| 203 | Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearing, 1400 rpm, complete with all accessories. (a) Cat A |
| 204 | Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/ wooden block including connections etc as required. |
| 205 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories.(b) Cat B |
| 206 | Supplying anderectingLED street light fitting suitable for60W lamp, including lamp, with PF >0.95 class IP65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. |
| 207 | Providing & erecting 4 m high galvanised conical pole withfoundation bolts having bottom dia. from 115 to 130 mm, top dia.from 65 to 75 mm on provided foundation as per specification no.OH-PL/CPL |
| 208 | Providing and erecting galvanised 1000mm single arm sword type bracket with FRP domeand ball as per specification no. OH-PL/PBKT |
| 209 | Providing & erecting 3 m high galvanised conical pole withfoundation bolts having bottom dia. from 105 to 115 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL |
| 210 | Providing & erecting 6 m high galvanised conical pole with foundation bolts having bottom dia. from 135 to 160 mm, top dia. from 65 to 75 mm on provided foundation as per specification no.OH-PL/CPL. |
| 211 | Making M- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacityas 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 212 | Supply, Installation, Testing & Commissioning of 30W-40W LED Decorative Post Top luminaire, 40W LED Decorative Post Top luminaire with a classic form providing an indirect lightingwhich emits a pleasant, low glare light for either symmetric or asymmetric light distribution.Confirming to IEC Safety Standard (IEC60598, IEC61347)• Luminaire body of cast aluminium, canopies of corrosion-resistant aluminium painted white and a diffuser of highly impact-resistant clear PMMA (IK06) fixed on to the body,• IP66 ROHS • Providing an indirect lighting, it emits a pleasant, low glare light, making it the perfectluminaire for visual comfort in outdoor environments.• Chip on Board (COB) LED along with reflector present in Luminaire to generate,uniform light distribution.• Operating temperature range -10°C to 50°C• Operating Voltage Range: 180-240 Vac , Power Factor = 0.95 Surge Protection Device: Standard 10kV and optional 20kV SPD• Electrical class l • Options of reflector available to generate symmetric or asymmetriclight intensity distribution.• Suitable for a Vertical mounting of 48mm diameter.• Ingress Protection: IP66• Impact resistance: IK06• Overall system efficiency of 70lm/W at correlated colour temperature (CCT) of 4000K• colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours.• BIS certified potted driver having internal surge protection of 4/4 kVinclusive of all connectors accessories complete with mountings |
| 213 | Supplying and Installing following size perforatedtype 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.(c) 200mm width x 50mm depth (16 SWG) |
| 214 | Supplying and erecting UPVC reinforced flexible conduit 50mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. |
| 215 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable inrecessed PVC conduit(heavy) with modular switch, modular plates,suitable size modular GI box of specified Categoryand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C-- with Cat B Modular Accessories |
| 216 | Supplying and fixing stepped type electronic fan regulator on the existing modularplate switch box including connections but excluding modular plate etc. as required (b) Cat B |
| 217 | Supplying and fixing suitable size modular GI box with modular plate and coverin front on surface or in recess including providing and fixing 3 pin 5/6 Amodular socket outlet and5/ 6 Amodular switch connection painting etc. as required.(b) Cat B |
| 218 | Supplying and fixing suitable size modular GI box with modular plate and coverin front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and15/16 Amodular switch connection painting etc as required.(b) Cat B |
| 219 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required |
| 220 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independentrecessed PVC conduit(medium) of appropriate size as required. (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 221 | (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 222 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 223 | (d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit) |
| 224 | (k) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit) |
| 225 | DBs, MCBs, RCCBs etc. |
| 226 | Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment. |
| 227 | Supply and erecting meter box suitable for single phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment. |
| 228 | Supply, installation, testing and commissioning of electronic type single phase energy meter (KWh), ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A |
| 229 | Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A |
| 230 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(a) 8 way double door Cat B |
| 231 | (b) 16 way double door Cat B |
| 232 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(d) 8 way (8+24), double door, Horizontal type Cat A |
| 233 | Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(i) SP, Cat B |
| 234 | (ii) DP, Cat B |
| 235 | Supplying and fixing 40 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(i) TP, Cat B |
| 236 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA inthe existing MCB DB complete with connections testing and commissioning etc as required(i) 25 A, Cat B |
| 237 | (ii) 40 A, Cat B |
| 238 | Supplying and fixing SP blanking plate in the existing MCB DB complete as required |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail