}

Development Of Tourist Amenities At Khechepari In West Sikkim., West Sikkim-Sikkim

Department Of Tourism And Civil Aviation has published Development Of Tourist Amenities At Khechepari In West Sikkim.. Submission Date for this Tender is 12-01-2022. Civil Work Tenders in West Sikkim Sikkim. Bidders can get complete Tender details and download the document.




Tender Notice

30215931
Development Of Tourist Amenities At Khechepari In West Sikkim.
Open Tender
Indian
Sikkim
West Sikkim
12-01-2022

Tender Details

Development Of Tourist Amenities At Khechepari In West Sikkim.

Key Value

Document Fees
INR 50000 /-
EMD
INR 1189388.0 /-
Tender Value
INR 4.75 Crore /-

BOQ Items

Name of Work: Development of Tourist Amenities at Khechepari in West Sikkim
Sl. No. Item Description
1HILL CUTTING AND PROTECTIVE WORK
2Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.
3Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
4Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
5Cost of Haulage of Non-stock Materials (50 km)
6Loading and unloading
7Cost of Haulage of Stock Materials(72 km)
8Loading and unloading
9Throwing of Spoils within 30 kms
10Loading and unloading
11CONSTRUCTION OF MODERN CAFETARIA AT KHECHEPARI
12Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.
13Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
14Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
15Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)
16Sand filling in foundation in layer not exceeding 20cum including watering, ramming etc, all complete.
17Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
18Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.
19Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size)
20Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete.
21Providing, fixing & removing form work for casting R.C.C items as indicated below
22Foundation Footing
23Foundation Column
24Plinth Beam
25Column
26Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
27Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.
28Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
29Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent)
30Providing, fitting and fixing of dressed timberframes, completely hand crafted in workshop. (katus or equivalent) in all doors.
31Providing, fitting and fixing of designer timberframes, completely hand crafted in workshop. (katus or equivalent) in all windows.
32Providing fitting and fixing in position of designer fully paneled door shutters designed and handcrafted in workshops of teak timber or equivalent excluding steel butt hinges, tower bolts, handles, door knobs, screws etc all complete.
33Providing fitting and fixing in position of designer fully paneled window shutters designed and handcrafted in workshops of teak timber or equivalent including steel butt hinges, tower bolts, handles, handles,eye hooks, screws etc all complete.
34Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
35Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in walls etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
36Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and primingall complete.
37Providing and painting with Aluminum paint two or more coats on new surface to give an even shade including cleaning and preparing the surface complete. New surface
38Providing and French spirit polishes two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
39Providing, fitting, fixing of 24 BWGGP sheet roofing with G.I. hooks, bolts and nut 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt)and paintedin lapping with bitumen, GI limpet washers, including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.
40Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete.
41Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete.
42Providing fitting & fixing 16mm thick valley of 90cm overall width in plain pre-painted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete.
43Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
44Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.
45Stone tile 8mm thick (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement all complete.
46Doors and Window Fittings
47Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete.
48Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete.
49Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete.
50Providing, fitting and fixing handles 125mm size with necessary screws etc complete.
51Providing and fixing M.S. or oxidized M.S. Hook and Eyes with complete set.
52Providing and Fixing Hydraulic door closer with accessories and screws complete.
53Providing Fabricating and Fixing of non opening fixedAnodised Aluminium Skylight ( Velux or equivalent) pre-fabricated at factory and installed as per directions of the engineer in charge all complete.
54Cost of Haulage ofNon-stock materials (50km)
55Loading and Unloading
56Haulage
57Cost of Haulage ofStock materials (72 Km)
58Loading and Unloading
59Haulage
60Water Supply and Sanitation(12.5%)
61Electrification and lighting (15%)
62ECO-FRIENDLYWALKWAY
63Site preparatory work including clearing of blocked drains etc by manual means and disposing of spoils manually all complete.
64Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
65Stone Edging Providing & laying 15 cm (6") wide and 23 cm (9") deep hammer dressed stone edging with clean hard selected stones including packing of sides to proper line, level and as per directions of the Engineer-in-Charge, complete.
66Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
67P/L 6" thick flatsone on walkway with clean hard selected stone as per the direction iof engineer in-charge all complete.
68Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.
69Carraige of Stock Materials
70Loading and unloading
71Cost of Haulage
72Carraige of Non-Stock Materials
73i) Sand
74Loading and unloading
75Cost of Haulage
76ii)Stone Chips
77Loading and unloading
78Cost of Haulage
79iii) Stone
80Loading and unloading
81Cost of Haulage
82INSTALLATION OF PRAYER WHEELS ON WOODEN FRAMES EITHER SIDE OF THE WALKWAY .
83Site preparatory work including clearing of minor slip by manual means and disposing of spoils manually all complete.
84Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
85Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
86Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size)
87Providing, fitting and fixing of dressed local timber(katus)in all types of frames complete.
88Providing, fitting and fixing 38mm panelling in sal timber over a frame of sal timber excluding the cost of polishing and including cost of one coat priming on the base frame complete.
89Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.
90Supplying, fabricating, fitting and fixing dressed sal timber truss including hoisting, fixing in position and applying a priming coat of approved wooden primer, reveted or bolted including special shape washer etc completeroofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete.
91Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers complete.
92Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete.
93Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and primingall complete.
94Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.
95Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
96Providing, fitting, fixing of copper buddhist prayer wheels as per the direction of Engineer in-charge all complete.(Market Rate)
97Carraige of Stock Materials (40 kms)
98Loading and Unloading
99Cost of Haulage
100Carraige of Non-Stock Materials (40 KM)
101i)Sand
102Loading and Unloading
103Cost of Haulage
104ii) Stone Chips
105Loading and Unloading
106Cost of Haulage
107iii) Stone
108Loading and Unloading
109Cost of Haulage
110CONSTRUCTION OF POLICE OUTPOST AT KHECHEPARI
111Site Levelling Works
112Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
113Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
114Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)
115Sand filling in foundation in layer not exceeding 20cum including watering, ramming etc, all complete.
116Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
117Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.
118Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size)
119Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete.
120Providing, fixing & removing form work for casting R.C.C items as indicated below
121Foundation Footing
122Foundation Column
123Plinth Beam
124Column
125Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
126Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.
127Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
128Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent)
129Providing, fitting and fixing of dressed timberframes, completely hand crafted in workshop. (katus or equivalent) in all doors.
130Providing, fitting and fixing of dressed timberframes, completely hand crafted in workshop. (katus or equivalent) in all windows.
131Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete
132P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete.
133Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
134Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in walls etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
135Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and primingall complete.
136Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
137Providing and French spirit polishes two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
138Providing, fitting, fixing of 24 BWGGP sheet roofing with G.I. hooks, bolts and nut 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt)and paintedin lapping with bitumen, GI limpet washers, including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.
139Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete.
140Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete.
141Providing fitting & fixing 16mm thick valley of 90cm overall width in plain pre-painted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete.
142Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
143Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.
144Stone tile 8mm thick (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement all complete.
145Doors and Window Fittings
146Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete.
147Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete.
148Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete.
149Providing, fitting and fixing handles 125mm size with necessary screws etc complete.
150Providing and fixing M.S. or oxidized M.S. Hook and Eyes with complete set.
151Providing and Fixing Hydraulic door closer with accessories and screws complete.
152Cost of Haulage ofNon-stock materials (50 km)
153Loading and Unloading
154Haulage
155Cost of Haulage ofStock materials
156Loading and Unloading
157Haulage
158Water Supply and Sanitation(12.5%)
159Electrification and lighting (15%)
160CONSTRUCTION OF R.C.C STALL/SHOPS AT KHECHEPARI
161Site Levelling Works
162Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
163Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
164Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)
165Sand filling in foundation in layer not exceeding 20cum including watering, ramming etc, all complete.
166Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
167Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.
168Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size)
169Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete.
170Providing, fixing & removing form work for casting R.C.C items as indicated below
171Foundation Footing
172Foundation Column
173Plinth Beam
174Column
175Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
176Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.
177Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
178Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
179Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
180Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in walls etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
181Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and primingall complete.
182Providing and painting with Aluminum paint two or more coats on new surface to give an even shade including cleaning and preparing the surface complete. New surface
183Providing and French spirit polishes two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
184Providing, fitting, fixing of 24 BWGGP sheet roofing with G.I. hooks, bolts and nut 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt)and paintedin lapping with bitumen, GI limpet washers, including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.
185Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete.
186Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete.
187Providing fitting & fixing 16mm thick valley of 90cm overall width in plain pre-painted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete.
188Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
189Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.
190Providing, fitting and fixing in position collapsible steel shutterwith vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Chargeall complete:including providing and fixing wire springs grade No 2 and MS top cover of required thickness of rolling shutters as per the direction of Engineer - in- Chargeall complete:
191Cost of Haulage ofNon-stock materials (50 km)
192Loading and Unloading
193Haulage
194Cost of Haulage ofNon-stock materials
195Loading and Unloading
196Haulage
197Electrification and lighting (15%)
198Provision for GST (12%)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail