Urban Local Bodies has published Estimate For Devlopment Of 14 Parks ( 3 Parks Pocket-1 Sector-7, 4 Parks Pocket-2 Sector-7 And 7 Parks Sector-7 Extention ) Ward-15, Zone- I, Under Municpal Corporation Gurugram ( Haryana ) ( Re-Call ) Estimate For Devlopment Of 14 Parks ( 3 Pa. Submission Date for this Tender is 22-12-2021. Gardening Tenders in Gurugram Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | NS Item |
| 2 | (i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical G.I pipe of size 88 mm and height 2890mm, the central G.I pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two G.I pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on G.I tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in G.I pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in G.I tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including fixing at site and supervision & transportation & all type taxes).The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect. |
| 3 | Musical fountain inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect. |
| 4 | Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of G.Ipipe of jindal make 2” x 12 gauge. It stays with G.I pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with G.I chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of enginner in charge. |
| 5 | -Providing an fixing of Gate valve for Hydrant connection. |
| 6 | Providing and Fixing Public Information Board consisting of 75mm G.I pipe of size 2.45 m * 1.15 m with 900 mm * 900 mm G.I sheet of 16 gauge connected/welded with 5mm thick steel plate of duly painted as per column mention in drawing and fixing at site in 60*60*75 cms cement concrete in 1:2:4 block complete in all respect. |
| 7 | "Metalic lion statue f\or statue for exterior decorationlionfigure3ftheightcolour metalicmaterial metalor stoneweight 30kg" The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of enginner in charge. |
| 8 | -Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site. |
| 9 | FRP Dustbin (Tilting Type) of capacity 60 LTR. Bodyis made of moulded fiberglass re-inforced plastic of 2mm thick having its lid with handle. It fitted with m.s square pipe 1.25” x 1.25” x 14 gauge & m.s flat 50 x 5mm, 30 x 5mm base structure with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site. |
| 10 | Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micror thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and selt lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitteed with in inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipments to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and covernuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect. |
| 11 | -Providing and fixing of 2.5mm thick Nylone cricket net properly in frame complete in all respect. |
| 12 | -Providing and fixing of Galvenised iron chain linked mesh, made of wires of thickness 3-4mm and mesh size 1-3inch welded properly in frame complete in all respect. |
| 13 | Sea-Saw (4 seater): 8’ L x 5’.5 W x 15” high. Frame is of G.I pipe 2” x 12gauge. Sitting planks is of G.I pipe 2” x 12 gauge and its cantilever & handles is of G.I pipe ¾” x 12 Guage .Sitting seats-4 nos is of molded FRP material in 3mm thick with suitable PU Primer & PU Paints. The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of enginner in charge. |
| 14 | -Providing and layinggranular sub base (GSB) Grading-IIISDS |
| 15 | -Selection no.-1 grass(loose grass) |
| 16 | -Providing granite stone in any shade, 15mm to 18mm Thick |
| 17 | Supply of fiber reinforced concrete planter with integrated bench,Base sitting platform of size 1590mm dia, with wooden finish, height of planter 645mm, top dia of planter 900mm, thickness of sitting bench 50mm |
| 18 | Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of G.I pipe jindal make 1” x 12 gauge & G.I rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including defect liability period of 2 year free of cost complete in all aspect. |
| 19 | Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc .The rates are inclusive of all taxes like GST, Transportation, Installation complete in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect. |
| 20 | Merry-Go-Round (4 seater): 5" Dia. Main frame is of G.I sq. pipe 2" x 2" x 14 G and having suitable handle & foot-restis of G.I round pipe 3/4" x 12 Gauge. Central pipe is of G.I pipe 3" x 12 G which further supports with G.I pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site. |
| 21 | Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5"H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical G.I pipe is of jindalmake 3” x12G ofI.S.I Mark – 2 no. The pipes used should be G.I of Jindal make in all the equipments. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect. |
| 22 | Providing & Fixing eluminated charecters with back light & Testing including fitting all complete.The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of enginner in charge. |
| 23 | -Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature complete in all respect |
| 24 | -Providing and laying 3/4"dia G.I pipe line. |
| 25 | SUPPLY OF PRECAST CONCRETE RCC BENCHES HAND REST OF SIZE 1500MM MANUFACTURED BY M-30 GRADE OF CONCRETE. CONCRETEPLANKS IN RED COLOUR SIZE MMX400MMX50MM AND 1NO.OF CONCRETE PLANK IN RED COLOUR SIZE 1500MMX 425MMX50MMEACH BENCH CONSIST OF 2 NO.L SHAPE BASE FOR IN GREY CEMENT COLOUR THICKNESS 80MM BACK HEIGHT 890MM FRONT HEIGHT 450MM SITTING LENGTH OF BENCH 1500MM SITTING HEIGHT 450MM TOTAL HEIGHT 890MM.Manufactured by M-30 grade of concrete with suitable reinforcement to avoid breakage as per drawing enclosed with carriage, loading & unloading with fixing and all type taxes including 18% GST and defect liability of 6 months complete in all respect to full satisfaction of engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
