Bids Are Invited For Valve, Check Valve , Flanged ,Dia- 2 Inch, 300 Lb,Matl.- Cs - Inch, 300 Lb, 1/16 Inch Raised Face, Check Valves,Specification : Flanged Valves, Carbon Steel Body, 13% Cr. Steel Trim,Dimensions To Ansi B 16.10, Flanges Ansi B16.5 With

Sharing tender

Bids Are Invited For Valve, Check Valve , Flanged ,Dia- 2 Inch, 300 Lb,Matl.- Cs - Inch, 300 Lb, 1/16 Inch Raised Face, Check Valves,Specification : Flanged Valves, Carbon Steel Body, 13% Cr. Steel Trim,Dimensions To Ansi B 16.10, Flanges Ansi B16.5 With Conc Serraeted Face Finish 125 Aarh,Body Astm A-216 Grade Wcb, Trim Astm A-182 Grade F6 Or Astm A-217 Grade Ca 15,Marking Mss Sp-25, Swing, Bolted Cap, Disc Hinge Astm A216 Gr Wcb,Hinge Pin 13% Cr. Ss + Stellited, Seat Renewable, Screwed, 13% Cr. Ss + Stellited,Shell Test Pressure :450 Psig, Seat Leak Test : 325 Psig , Valve, Check Valve , Socket Welded ,Dia- 1-1/2 Inch, 800 Lb,Matl.- Cs - Specifications As Per Eil Tag Sheet No.53001 , Valve, Check Valve , Flanged ,Dia- 8 Inch, 150 Lb,Matl.- Cs - 8 Inch, 150 Lb, 1/16 Inch Raised Face, Check Valves,Eil Tag Sheet No.53301Specification : Flanged Valves, Carbon Steel Body, 13% Cr. Steel Trim,Dimensions To Ansi B 16.10, Flanges Ansi B16.5 With Conc Serraeted Face Finish 125 Aarh,Body Astm A-216 Grade Wcb, Trim Astm A-182 Grade F6 Or Astm A-217 Grade Ca 15,Marking Mss Sp-25, Swing, Bolted Cap, Disc Hinge Astm A216 Gr Wcb,Hinge Pin 13% Cr. Ss + Stellited, Seat Renewable, Screwed, 13% Cr. Ss + Stellited,Shell Test Pressure :450 Psig, Seat Leak Test : 325 Psig , Valve, Check Valve , Flanged ,Dia- 10 Inch, 150 Lb,Matl.- Cs - 10 Inch, 150 Lb, 1/16 Inch Raised Face, Check Valves,Eil Tag Sheet No.53301Specification : Flanged Valves, Carbon Steel Body, 13% Cr. Steel Trim,Dimensions To Ansi B 16.10, Flanges Ansi B16.5 With Conc Serraeted Face Finish 125 Aarh,Body Astm A-216 Grade Wcb, Trim Astm A-182 Grade F6 Or Astm A-217 Grade Ca 15,Marking Mss Sp-25, Swing, Bolted Cap, Disc Hinge Astm A216 Gr Wcb,Hinge Pin 13% Cr. Ss + Stellited, Seat Renewable, Screwed, 13% Cr. Ss + Stellited,Shell Test Pressure :450 Psig, Seat Leak Test : 325 Psig , Check Valve, Flanged, Dia- 12 Inch, 300 Pound, Matl.- Cs - Valve,Check Valve, Flanged, Dia 12 Inch, 300 Lbs, Body : Cs, Astm A 234 Gr WcbCheck Valves, Size - 12 Inch, 300 Lb, Ends : Flanged To B16.5 Rf 125 Aarh, Body : Cast A 216 Gr Wcbcover : Bolted, A 216 Gr Wcb, Disc/Piston : Faced With 13% Cr Steel/ 13% Cr Steel, Body Seat Ring :Renewable/Non Renewable, 13% Cr Steel Facing/13% Cr Steelhydrotest Pressure : Body - 1125Psi, Seat - 825 Psi, Test Pressure With Air : 80 Psi(Specification As Per Eil Valve Tag No.53401) , Check Valve, Dia- 4 Inch, 300 Lb Pound, Matl.- Alloy Steel - Valve,Check Valve,Dia- 4 Inch, 300 Lb, Matl.- Alloy Steel, A 217 Gr. C5,Stellited, Check Valve, Dia- 4 Inch, Rating- 300 Lb, Matl: Body-A 217 Gr. C5, Disc -Stellited Body Seat Ring - Renewable/Nonrenewable, Stelliteends-Flgd To B-16.5 Rf/125Aarh, Bs-1868, Eil Tag No.53436 , Check Valve, Dia- 6 Inch, 300 Lb Pound, Matl.- Alloy Steel - Valve,Check Valve,Dia- 6 Inch, 300 Lb, Matl.- Alloy Steel, A 217 Gr. C5,Stellited- Check Valve, Dia- 6 Inch, Rating- 300 Lb, Matl: Body-A 217 Gr. C5, Disc -Stellited Body Seat Ring - Renewable/Nonrenewable, Stelliteends-Flgd To B-16.5 Rf/125Aarh, Bs-1868, Eil Tag No.53436 , Check Valve, Dia- 10 Inch, 300 Lb Pound, Matl.- Alloy Steel - Valve,Check Valve,Dia- 10 Inch, 300 Lb, Matl.- Alloy Steel, A 217 Gr. C5,Stellited- Check Valve, Dia- 10 Inch, Rating- 300 Lb, Matl: Body-A 217 Gr. C5, Disc -Stellited Body Seat Ring - Renewable/Nonrenewable, Stellite Ends-Flgd To B-16.5 Rf/125Aarh, Bs-1868, Eil Tag No.53436 , Check Valve, Dia- 2 Inch, 300Lb Pound, Nace, 53411 - Nace Valve, Check, Dia 2 Inch, 300LbNace Quality, Check Valve, Dia 2 Inch, 300 Lb, Specification As Per Eil Valve Tag No.53411,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Check Valve, Flanged, Dia- 4 Inch, 300Lb Pound, Nace, 53411 - Nace Valve, Check, Dia 4 Inch, 300LbNace Quality, Check Valve, Dia 4 Inch, 300 Lb, Specification As Per Eil Valve Tag No.53411,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Check Valve, Dia- 4 Inch, 150Lb Pound, Nace, 53311 - Nace Valve, Check, Dia 4 Inch, 150LbNace Quality, Check Valve, Dia 4 Inch, 150 Lb, Specification As Per Eil Valve Tag No.53311,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Dia- 2 Inch, 150Lb Pound, Nace, 53311, Check Valve - Nace Valve, Check, Dia 2 Inch, 150LbNace Quality, Check Valve, Dia 2 Inch, 150 Lb, Specification As Per Eil Valve Tag No.53311,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Check Valve, Dia-1 Inch, 800 Lb, Matl: Body-Astm A 105,Disc/Piston:13%Cr.Steel Facing/13% Cr.Steel, Ends-Sw 3000# To Ansi B 16.11, Std:Bs 5352(Std Bore), Eil Tag No.53001 - Specification As Per Enclosed Eil Tag No.53001 , Check Valve, Socket Welded, Nace+Hydrogen Service, Dia-1 Inch, 800 Lb Pound, Body- Astm A 105 Trim-Ss 316L , Eil Tag: 53095 - Check Valve, Socket Welded, Nace+Hydrogen Service, Dia-1 Inch, 800 Lb Pound, Body- Astm A 105 Trim-Ss 316L , Eil Tag: 53095,Check Valve, Dia 1 Inch, 800 Lb,Matl: Body- Astm A 105 Trim-Ss 316L, Ends-Sw 3000# To Ansi B 16.11, Bs-5352.Nace Specification For Sour Service 6-44-60Hydrogen Service Spec As Per Eil Specification Sheets(6501-6-44-0-0082). , Valve, Globe Valve , Flanged ,Dia- 6 Inch, 600 Lb,Matl.- Cs - Flanged Valves, Cast Or Forged Carbon Steel Body, 13G Steel Trimspecifications : Dimensions : Ansi B 16.34, Flanges : Asa B16.5, Body : Astm A 216Gr.Wb Orastm A 105 Gr.Ii, Trim Astm A 182 Gr. F6 Or Astm A351 Gr.Ca15, Marking: Mss Sp-25.600 Lb In Rfglobe Valves,Size In Inches- 6 , Globe Valve, Dia- 4 Inch, 600 Pound - Ibr Quality, Globe Valve, Flanged, Dia 4 Inch, 600 Lb, Body - Cs, Stem 13% Cr Steel, Eil Tag 52502Ibr Quality Globe Valve, Dia 4 Inch, 600 Lb, Ends-Flanged To B16.5 Rf 125 Aarhstandard : Bs1873 (Std Bore) & Ibrbody- Cast To Astm A 216 Gr Wcbbonnet : Bolted To Astm A 216 Gr Wcbstem-Rising, 13% Cr Steel (No Casting)Disc : Loose Plug Type/Ball Type - Stellited/ 13% Cr + Stellitedbody Seat Ring : Renewable/Non Renewable/Seal Welded - Stellited/ 13% Cr + Stellitedhydrotest Pressure :Body : 2250 Psi, Seat : 1630 Psiair Test With : 80 Psitesting As Per Bs 6755 (Par-I) & Ibrall Valves To Be Supplied With Ibr Certificate Form Iiicall Valves Shall Be Painted Red On Body To Bonnet Jointspecification As Eil Valve Tag No.52502 , Globe Valve, Dia- 1-1/2 Inch, 800 Pound - Globe Valve , Sw, Dia- 1 1/2 Inch, 800 Lb, Astm A 105,StellitedSpecification As Per Eil Valve Tag No.52001 , Globe Valve, Dia- 2 Inch, 300 Lb Pound, Matl.- Alloy Steel - Valve, Globe Valve,Dia- 2 Inch, 300 Lb, Matl.- Alloy Steel, A 217 Gr. C5,Stellited- Globe Valve, Dia- 2 Inch, Rating- 300 Lb, Matl: Body-A 217 Gr. C5,Stem-13%Cr.Steel (No Casting), Disc - Loose Plug Type/Ball Typ, Stellitedbody Seat Ring - Renewable/Nonrenewable, Stellite Ends-Flgd To B-16.5 Rf/125Aarh,Bs-1873, Eil Tag No.52436 , Globe Valve, Dia- 3 Inch, 300 Pound, Matl.- Alloy Steel - Valve, Globe Valve,Dia- 3 Inch, 300 Lb, Matl.- Alloy Steel, A 217 Gr. C5,StellitedGlobe Valve, Dia- 3 Inch, Rating- 300 Lb, Matl: Body-A 217 Gr. C5, Stem-13%Cr.Steel (No Casting), Disc - Loose Plug Type/Ball Typ, Stellited, Body Seatring - Renewable/Nonrenewable, Stellite, Ends-Flgd To B-16.5 Rf/125Aarh, Bs-1873, Eil Tag No.52436 , Globe Valve, Dia- 4 Inch, 300 Lb Pound, Matl.- Alloy Steel - Valve, Globe Valve,Dia- 4 Inch, 300 Lb, Matl.- Alloy Steel, A 217 Gr. C5,Stellited- Globe Valve, Dia- 4 Inch, Rating- 300 Lb, Matl: Body-A 217 Gr. C5,Stem-13%Cr.Steel (No Casting), Disc - Loose Plug Type/Ball Typ, Stellitedbody Seat Ring - Renewable/Nonrenewable, Stellite Ends-Flgd To B-16.5 Rf/125Aarh,Bs-1873, Eil Tag No.52436 , Globe Valve, Flanged, Dia- 4 Inch, 150Lb Pound, Nace, 52311 - Nace Valve, Globe, Dia 4 Inch, 150LbNace Quality, Globe Valve, Dia 4 Inch, 150 Lb, Specification As Per Eil Valve Tag No.52311,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Globe Valve, Flanged, Dia- 2 Inch, 300Lb Pound, Nace, 52411 - Nace Valve, Globe, Dia 2 Inch, 300LbNace Quality, Globe Valve, Dia 2 Inch, 300 Lb, Specification As Per Eil Valve Tag No.52411,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Globe Valve, Dia- 3 Inch, 300Lb Pound, Nace, 52411 - Nace Valve, Globe, Dia 3 Inch, 300LbNace Quality, Globe Valve, Dia 3 Inch, 300 Lb, Specification As Per Eil Valve Tag No.52411,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Valve,Globe Valve, Flanged, 3 Inch, Rating 150 Pound, Carbon Steel With Bronze Trim And Corrocoat - Valve, Globe Valve, Flanged, Dia - 3 Inch, Rating - 150 Lb, Matl - Carbon Steel With Bronze Trim And Corrocoat, Eil Valve Spec - 52384, Eil Line Spec-A33y, A5y.Flanged Valves,Body: Cast, Astm A 216 Gr Wcb, Stem: Bronze (No Casting)Bonnet: Bolted, Astm A 216 Gr Wcb, Disc: Loose Plug Type/Ball Type - Bronzestem Packing: Renewable With Valve Open On Stream, Graphited Asbestos With Sacrificial Corr Inhib & Inconel Wirereinforcementhand Wheel: Non Rising, Malleable Iron/ Cast St/ Fab St/ Duct Ironfasteners: Astm A 193 B7/ A 194 Gr 2Hmarking To Mss Sp-25Special Service Conditions: Sea Water, Valve Spec: Bs 1873Size In Inches - 3 Inch, Valve Rating: 150 Lbsvalve End Rating: Flanged To B-16.5 Ff/ 125Aarheil Valve Spec: 52384, Eil Line Spec: A33y/A5y/A95y/J92avalve Internal Coating: As Per Hpcl Advisory Tsd/Insp/Gen/53, Clause 4.2.Bcoating To Be Procured Only From Reputed Vendors Like Akzo Nobel, L&T, Kirloaskar(Corrocoat) Etc. , Valve,Globe Valve, Flanged, 6 Inch, Rating 150 Pound, Carbon Steel With Bronze Trim And Corrocoat - Valve, Globe Valve, Flanged, Dia - 6 Inch, Rating - 150 Lb, Matl - Carbon Steel With Bronze Trim And Corrocoat, Eil Valve Spec - 52384, Eil Line Spec-A33y, A5y.Flanged Valves,Body: Cast, Astm A 216 Gr Wcb, Stem: Bronze (No Casting)Bonnet: Bolted, Astm A 216 Gr Wcb, Disc: Loose Plug Type/Ball Type - Bronzestem Packing: Renewable With Valve Open On Stream, Graphited Asbestos With Sacrificial Corr Inhib & Inconel Wirereinforcementhand Wheel: Non Rising, Malleable Iron/ Cast St/ Fab St/ Duct Ironfasteners: Astm A 193 B7/ A 194 Gr 2Hmarking To Mss Sp-25Special Service Conditions: Sea Water, Valve Spec: Bs 1873Size In Inches - 6 Inch, Valve Rating: 150 Lbsvalve End Rating: Flanged To B-16.5 Ff/ 125Aarheil Valve Spec: 52384, Eil Line Spec: A33y/A5y/A95y/J92avalve Internal Coating: As Per Hpcl Advisory Tsd/Insp/Gen/53, Clause 4.2.Bcoating To Be Procured Only From Reputed Vendors Like Akzo Nobel, L&T, Kirloaskar(Corrocoat) Etc. , Valve,Globe Valve, Flanged, 8 Inch, Rating 150 Pound, Carbon Steel With Bronze Trim And Corrocoat - Valve, Globe Valve, Flanged, Dia - 8 Inch, Rating - 150 Lb, Matl - Carbon Steel With Bronze Trim And Corrocoat, Eil Valve Spec - 52384, Eil Line Spec-A33y, A5y.Flanged Valves,Body: Cast, Astm A 216 Gr Wcb, Stem: Bronze (No Casting)Bonnet: Bolted, Astm A 216 Gr Wcb, Disc: Loose Plug Type/Ball Type - Bronzestem Packing: Renewable With Valve Open On Stream, Graphited Asbestos With Sacrificial Corr Inhib & Inconel Wirereinforcementhand Wheel: Non Rising, Malleable Iron/ Cast St/ Fab St/ Duct Ironfasteners: Astm A 193 B7/ A 194 Gr 2Hmarking To Mss Sp-25Special Service Conditions: Sea Water, Valve Spec: Bs 1873Size In Inches - 8 Inch, Valve Rating: 150 Lbsvalve End Rating: Flanged To B-16.5 Ff/ 125Aarheil Valve Spec: 52384, Eil Line Spec: A33y/A5y/A95y/J92avalve Internal Coating: As Per Hpcl Advisory Tsd/Insp/Gen/53, Clause 4.2.Bcoating To Be Procured Only From Reputed Vendors Like Akzo Nobel, L&T, Kirloaskar(Corrocoat) Etc. , Globe Valve, Dia- 3 Inch, 150Lb Pound, Nace, 52311 - Nace Valve, Globe, Dia 3 Inch, 150LbNace Quality, Globe Valve, Dia 3 Inch, 150 Lb, Specification As Per Eil Valve Tag No.52311,Vendor To Follow A)Eil Nace Specification For Sour Service 6-44-60, B)Nace Standard -Mr0103-2007 , Valve,Globee Valve, Flanged, 2 Inch, Rating 150 Pound, Carbon Steel With Bronze Trim And Corrocoat - Valve, Globe Valve, Flanged, Dia - 2 Inch, Rating - 150 Lb, Matl - Carbon Steel With Bronze Trim And Corrocoat, Eil Valve Spec - 52384, Eil Line Spec-A33y, A5y.Flanged Valves,Body: Cast, Astm A 216 Gr Wcb, Stem: Bronze (No Casting)Bonnet: Bolted, Astm A 216 Gr Wcb, Disc: Loose Plug Type/Ball Type - Bronzestem Packing: Renewable With Valve Open On Stream, Graphited Asbestos With Sacrificial Corr Inhib & Inconel Wirereinforcementhand Wheel: Non Rising, Malleable Iron/ Cast St/ Fab St/ Duct Ironfasteners: Astm A 193 B7/ A 194 Gr 2Hmarking To Mss Sp-25Special Service Conditions: Sea Water, Valve Spec: Bs 1873Size In Inches - 2 Inch, Valve Rating: 150 Lbsvalve End Rating: Flanged To B-16.5 Ff/ 125Aarheil Valve Spec: 52384, Eil Line Spec: A33y/A5y/A95y/J92avalve Internal Coating: As Per Hpcl Advisory Tsd/Insp/Gen/53, Clause 4.2.Bcoating To Be Procured Only From Reputed Vendors Like Akzo Nobel, L&T, Kirloaskar(Corrocoat) Etc. , Globe Valve, Dia- 1 Inch, 800 Pound - Globe Valve , Sw, Dia- 1 Inch, 800 Lb, Astm A 105,StellitedSpecification As Per Eil Valve Tag No.52001 , Globe Valve, Dia-1/2 Inch, 800 Lb, Matl: Body-Astm A 105,Stem-13%Cr.Steel(No Casting), Ends-Sw 3000# To Ansi B 16.11, Std:Bs 5352(Std Bore) 602, Eil Tag No.52001 - Specification As Per Enclosed Eil Valves Tag No: 52001 , Globe Valve, Dia-1 Inch, 800 Lb, Matl: Body-Astm A 105,Stem-13%Cr.Steel(No Casting), Ends-Sw 3000# To Ansi B 16.11, Std:Bs 5352(Std Bore) 602, Eil Tag No.52001 - Specification As Per Enclosed Eil Valve Tag No.52001 , Globe Valve, Dia- 0.75 Inch, 800 Pound - Ibr Quality, Globe Valve, Sw, Dia 0.75 Inch, 800 Lb, Body - Cs, Stem 13% Cr Steel, Eil Tag 52002,Ibr Quality Globe Valve, Dia 0.75 Inch, 800 Lb, Ends-Sw 3000# To Ansi B 16.11,Standard : Bs 5352 & Ibr, Body- Forged To Astm A 105, Bonnet : Bolted To Astm A 105 Stem-Rising, 13% Cr Steel (No Casting), Disc : Loose Plug Type - 13% Crsteel Facing/13% Cr Steel/ Stellited, Body Seat Ring : Renewable/Non Renewable - 13% Cr Steel Facing/13% Cr Steel, Hydrotest Pressure :Body : 3000 Psi, Seat : 2175Psi, Air Test With : 80 Psi, Testing As Per Bs 6755 (Part I) & Ibr, All Valves To Be Supplied With Ibr Certificate Form Iiic, All Valves Shall Be Painted Red On Body To Bonnetjoint Specification As Eil Valve Tag No.52002 , Globe Valve, Dia- 1.5 Inch, 800 Pound - Ibr Quality, Globe Valve, Sw, Dia 1.5 Inch, 800 Lb, Body - Cs, Stem 13% Cr Steel, Eil Tag 52002,Ibr Quality Globe Valve, Dia 1.5 Inch, 800 Lb, Ends-Sw 3000# To Ansi B 16.11,Standard : Bs 5352 & Ibr, Body- Forged To Astm A 105, Bonnet : Bolted To Astm A 105, Stem-Rising, 13% Cr Steel (No Casting), Disc : Loose Plug Type - 13% Crsteel Facing/13% Cr Steel/ Stellited, Body Seat Ring : Renewable/Non Renewable - 13% Cr Steel Facing/13% Cr Steel, Hydrotest Pressure :Body : 3000 Psi, Seat : 2175Psi, Air Test With : 80 Psi, Testing As Per Bs 6755 (Part I) & Ibr, All Valves To Be Supplied With Ibr Certificate Form Iiic, All Valves Shall Be Painted Red On Body To Bonnetjoint Specification As Eil Valve Tag No.52002 , Globe Valve, Socket Welded, Nace+Hydrogen Service, Dia- 3/4 Inch, 800 Lb Pound, Body- Astm A 105 Trim-Ss 316L , Eil Tag: 52095 - Globe Valve, Socket Welded, Nace+Hydrogen Service, Dia- 3/4 Inch, 800 Lb Pound, Body- Astm A 105 Trim-Ss 316L , , Eil Tag: 52095,Globe Valve, Dia 3/4 Inch, 800 Lb,Matl: Body- Astm A 105 Trim-Ss 316L, Ends-Sw 3000# To Ansi B 16.11, Bs-5352.Nace Specification For Sour Service 6-44-60Hydrogen Service Spec As Per Eil Specification Sheets(6501-6-44-0-0082). , Globe Valve, Dia: 3 Inch, Rating 300Lb. Hydrogen Service, Flanged, B16.5Body-Astm A 351 Gr.Cf8c, Trim-Stellited,Stem-Ss347, Eil Tag: 52493 - Globe Valve, Dia: 3 Inch, Rating 300Lb. Hydrogen Service, Flanged, B16.5Body-Astm A 351 Gr.Cf8ctrim-Stellited,Stem-Ss347, Eil Tag: 52493, Globe Valve, Dia 3 Inch, Hydrogen Service, Rating 300 Lb, B-16.5, Rf/125Aarh ,Matl: Astm A 351 Gr.Cf8ctrim-Stellited,Stem-Ss347 To Ansi B 16.11, Bs-1873.Hydrogen Service Spec As Per Eil Specification Sheets(6501-6-44-0-0082). , Globe Valve, Ibr Service, Dia: 6 Inch, Rating 600Lb. Flanged, B16.5. Body-Astm A 216 Gr.Wcb Trim Stellited,Stem-13%Cr.S, Eil Tag: 52502 - Globe Valve, Ibr Service, Dia: 6 Inch, Rating 600Lb. Flanged, B16.5. Body-Astm A 216 Gr.Wcb Trim Stellited,Stem-13%Cr.S, Eil Tag: 52502, Globe Valve,Ibr Service, Dia 6 Inch, Rating 600 Lb, B-16.5, Rf/125Aarh ,Body-Astm A 216 Gr.Wcb Trim Stellited,Stem-13%Cr.S To Ansi B 16.11, Bs-1873. Valves Tobe Supplied With Ibr Certificate, All Valves Shall Be Painted Red On Body To Bonnet Joint . , Valve, Globe Valve , Flanged ,Dia- 3 Inch, 300 Lb,Matl.- Cs - Specifications As Per Eil Tag Sheet-52401 , Ball Valve,  Dia-3 Inch, Rating 150Lb. Flanged, B16.5, Body-Astm A 105/Astm A 216, Gr.Wcb Trim-Body Seat Rptfe, Eil Tag: 54301. - Ball Valve, Dia-3 Inch, Rating 150Lb. Flanged, B16.5, Body-Astm A 105/Astm A 216Gr.Wcb Trim-Body Seat Rptfe, Eil Tag: 54301, Ball Valve, Dia 3 Inch, Rating 150 Lb, B-16.5, Rf/125Aarh ,Matl: Body-Astm A 105/Astm A 216Gr.Wcb Trim-Body Seat Rptfe To Ansi B 16.11, Bs-5351. , Plug Valve,  Dia-1 Inch, Rating 150Lb. Flanged, B16.5, Body: Astm A 105/Astm A 216, Gr.Wcb Trim-Plug-Hardened, Eil Tag: 55301 - Plug Valve, Dia-1 Inch, Rating 150Lb. Flanged, B16.5, Body: Astm A 105/Astm A 216Gr.Wcb Trim-Plug-Hardened, Eil Tag: 55301, Plug Valve, Dia 1 Inch, Rating 150 Lb, B-16.5, Rf/125Aarh ,Matl: Body: Astm A 105/Astm A 216 Gr.Wcbtrim-Plug-Hardened To Ansi B 16.11, Bs-5353. Total Quantity : 1