Renovation And Greenery Of Check Dam At Kamargora Nala Ward No. 19 Under Kapali Nagar Parishad. Renovation And Greenery Of Check Dam At Kamargora Nala Ward No. 19 Under Kapali Nagar Parishad.
Tender Value
1.08 Crore
Estimated cost
Bid Submission
16 Dec 2021
0 days left
EMD
2.17 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapali → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation And Greenery Of Check Dam At Kamargora Nala Ward No. 19 Under Kapali Nagar Parishad. Renovation And Greenery Of Check Dam At Kamargora Nala Ward No. 19 Under Kapali Nagar Parishad.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area (RCD: 2.2) |
| 2 | E/W in stripping by hydraulic M/C in grade A & B type of soil including mooroum soil, soil mixed with kankar, pebbles, boulders upto 300 mm size and disposal of the same along with all organic materials in the country side beyond 150 M upto 500 M in all by tipper including construction & maintanance of haul road etc. all complete as per specification and direction of E/I. (WRD: 5.1.6.1) |
| 3 | E / W in dam fill in semi previous or impervious zone excavation byHydraulic Excavator and carriage by Tipper Truck making dam in proper design section including earth to be laid in layers of not more than 225 mm thick and breaking of clods to maximum 63 mm cube with all lifts including construction and maintenance of haul road etc.all complete as per specification and direction of E/I.Lead beyond 150 M but upto 500 M. (WRD: 5.1.22.1 ) |
| 4 | Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical specifications. S.O.R. Item No.13.2 |
| 5 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications. (PCC Grade M15) S.O.R. Item No.13.5.A (p) |
| 6 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. 80 mm x 60 mm rectangular. (RCD SOR: 8.4. iv) |
| 7 | SLEEK BENCH – PGGD 18? Product Area :- 1.2 m x 0.6 m? Capacity :- 3 AdultsThe sleek bench is made from FRP \"C\" channel wood finish (ISO) patti. The thickness of the strips is 4mm. The seating portion and backrest portion is made up of FRP and the stands are made up of MS rectangular tube with GI coating. At the end of the strips plastic end caps are given to prevent dust particles from entering in it. The sleek bench can accommodate 3 adults at a time. (MR) |
| 8 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.) Ordinary soil, Manual Means (Depth upto 3 m) S.O.R. Item No. 3.13 (i) A |
| 9 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all complete as per building cost of all materials, labour ryalty and taxes all complete as per building specification and driection of E/I (Mode of masurement compacted volume)(5.1.10) |
| 10 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. (DSR-2021: 16.91.2) |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).(DSR-2021: 16.69) |
| 12 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification. S.O.R. Item No. 12.3 |
| 13 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications PCC Grade M20. S.O.R. Item No. 12.8 (B) |
| 14 | Supplying,fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications.S.O.R. Item No. 12.40 |
| 15 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concreteto be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire (DSR 2021: 16.17.1) |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (DSR 2021: 10.16.1) |
| 17 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications (PCC Grade M15)S.O.R. Item No. 12.8 A |
| 18 | Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification. Random Rubble Masonry. S.O.R. Item No.12.7 (b) |
| 19 | Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications. Random Rubble Masonry. S.O.R. Item No. 13.4 A |
| 20 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment,wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications. S.O.R. Item No.13.8 |
| 21 | Construction of dry rubble flooring at cross drainage works for relatively less important works. |
| 22 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 23 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v |
| 24 | Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 25 | Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge. |
| 26 | Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 27 | Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 28 | Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 29 | Hormons /Plant Tonic Agri Sorb + |
| 30 | Plano Fix |
| 31 | insectisides and Pestisides FOR SIX MONTHS Rogar |
| 32 | Nuvan |
| 33 | Diethen M-45 |
| 34 | Thimet |
| 35 | Durmet |
| 36 | Organic Manure /Fertiliser Uria |
| 37 | Super Fasphet |
| 38 | Neam Cake |
| 39 | Mustered Cake |
| 40 | Bone Dust |
| 41 | DAP |
| 42 | Som /Shakti or equvelentbio organic manure (vermi compost |
| 43 | Metal Alloy Tree Guard (Gabion) for plant |
| 44 | Labour for maintance for 6 months |
| 45 | Installation of High Mast Light: : Supply of 12 mtr. High mast in one section construction S355 grade as per BS-EN 10025 top dia 100mm , botton dia 360mm, plate thickness 3mm, 12side polygon, galvanisastion as per BS EN IOS 1461, base plate dia 520mm, base plate thickness 25mm,GI signal spike lighting ptotection, maximaum wind speed 47mm/s as per IS :875 (part-3) with 6 nos foundation bolts of PCD 445mm TS 600/24mm dia /850mm long. luminaries carriage : material for 40 NB FRW class B. M. S. pipe dia of carriage ring 450mm (ID) with 8 arm, welded, 2 sections having carrying capacity upto 8 luminaries. trailing cable : 5 core 2.5sq.mm. PVC flexible copper conductor Winch /power tool: double drum ,SWI. 350kg with 0.75HP 6 pole single speed integral motorRope : Grade AISI 304, 7/19 construction , dia 5mm, BLC 1450 x 2 having 2 nos of continues rope. Aviation obstruction light : twin dome aviation obstruction light LED typeas required. feeder piller : control penal housing 32ATPN MCBincomer ,single dial timer ,25A contactor circuitfor automatic control of luminaries outgoing terminal and control circuit for power tool and remote control. |
| 46 | For 12 mtr. High mast : ITC of the high mast and light fixture with the help of suitable tools and plants , wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of sitable copper conductor lugs , MCB and all labour and construction of shallow fundation with M25 grade concrete for high mast light considering safe soil bearing capacity of10T/mtrs sq. for 12 M high mast |
| 47 | S.I.T.C 240W LED Flood lighting luminarie with pressure dia cast housing and toughened glass cover (IP 66 protection )in existing pole / pipe supply voltage 100-270VAC,50Hz . Luminaries shall be confirm to : 10322 part-5 / section-5 and shall be complete with all neccssary as required |
| 48 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 49 | Supplying and drawing 4 core 10sq mm pvc insulated and scheathed alluminium conductor armoured cable through under ground |
| 50 | Total |
| 51 | Goods & Service Tax (GST) |
| 52 | Total |
| 53 | Labour Cess |
AI Tender Summary
Tender Timeline
Dec 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender