construction of road Jhansi Nagar Ke Antargat Gram Takori Gaon Hanuman Mandir Se Chhapra Gaon Ko Jaane Wali Sadak Ka Nirman Karya. Jhansi Nagar Ke Antargat Gram Takori Gaon Hanuman Mandir Se Chhapra Gaon Ko Jaane Wali Sadak Ka Nirman Karya.
Tender Value
2.85 Crore
Estimated cost
Bid Submission
28 Dec 2021
0 days left
EMD
16.29 Lakhs
Bank guarantee accepted
Document Fee
11180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Office of Vice Chairman Jhansi Development Authori → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction of road Jhansi Nagar Ke Antargat Gram Takori Gaon Hanuman Mandir Se Chhapra Gaon Ko Jaane Wali Sadak Ka Nirman Karya. Jhansi Nagar Ke Antargat Gram Takori Gaon Hanuman Mandir Se Chhapra Gaon Ko Jaane Wali Sadak Ka Nirman Karya.
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work:Jhansi Nagar ke Antargat Gram Takori gaon Hanuman Mandir se Chhapra Gaon ko jaane wali sadak ka nirman karya.Note :-(1)-12% GST Excluded on the aforesaid work. |
| 2 | Clearing jungle including uprooting of rank vegetations grass, bush, wood trees an saplings of girth upto 30 cm measured at a heigh of 1 meter above ground level& emoval of rubbish upto a distance of 50 meters outside the peripheri of area cleaned. |
| 3 | Construction of granular sub-base by providing course graded meterial spreading in uniform layers with mortar grader on prepared surface mixing by mix in place method with rotovator at omc and compacting with vibratory roler to achieve the desire density complete as per clause 401. (excluding GST) |
| 4 | Providing and laying spreading and compaction graded stone aggregate wet mix macadom specification i/c premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver finisher in Sub-base / base course on well prepared surface and compaction with vibatory rollers to achive the desire density. |
| 5 | Providing and applying primer coat with bitumin emulsion (SS-1) on prepared surface of granular base incluiding cleaning of road surface any spraying primer at the rate 0.70kg/sqm using mechanical means. As per M.O.R.T.&H. specification clause 5.1 SI No. 502 |
| 6 | Supply and fixing of pavement maker (Cat Eye) Type X ASTMD-4956-04 Avery dennison /3-M (USA Maker) consisting of ASA plastic housing fitted with lightly adherent plotting compound. The housing shall contain prismatic two glass covered prismatic reflective |
| 7 | Providing and applying Tack Coat with bitumen VG-20 using Bitumen pressure distributor @ 0.30 kg/sqm on the prepared granular surface cleaned with mechinal broom. |
| 8 | Providing and laying Dense Graded Bitumenous Macadam grade - 1 (D.B.M. with 60-90 TPH) batch type hot mix plant conducing an average output of 7 tonns per hour using aggregate of specified grading premix with bitumeneous under VG-30 @ 4% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic pave finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction, As per M.O.R.T. & H. specifications clause 507. complete in all respects. |
| 9 | P/L Bitumenous concrete with 100.120TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregate of spacified grading premixed with bitumenous binder 5.40 percent by weight of total mix bitumenous binder 5.40 percent by weight of total mix and filler transporting the hot mix to work site laying with hydrostatitics paver finisher with sencer control to the required grade level and alignment rolling with smooth wheeled vibratory and tendem rollers to achive the desired compactiong as per MORTH specification clause No. 508 Sl No. 509 complete in all respects. |
| 10 | Cement concrete with 2 cm (0.75\") gauge approved stone ballast, approved coarse and and cement in the proportion of 4 : 2: 1 including supply of all materials, labour and T & P etc., required for proper completion of the work. As per New Item Pg. NO. 39 |
| 11 | Supply and fixing of pavement maker (Cat Eye) Type X ASTMD-4956-04 Avery dennison /3-M (USA Maker) consisting of ASA plastic housing fitted with lightly adherent plotting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light i/c all tax. (S.I. no. 11) |
| 12 | P/L of Center line & Edge line road marking with hot applied themoplastic compound 2.5 mm thick including reflectionsing glass beads @ 205 gms per sqm area, thinkness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 the finished surface to be level, uniform and form streaks and holes (S.I. no. 1) |
| 13 | Providing and laying of 80 mm interlocking concrete block pavement laid in stone dust base and fill joint with fine sand. Joint filled after labling and dressing base including supply of all material, labour, T & P etc., required for proper completion of the work.As per New Item Pg. No. 58 |
| 14 | Earth work in cutting or in filling in ordinary soil, excavation to be in the form of regular pits not exceeding ½ mtr. (20\") in depth and earthwork in embankment to be in 20 cm (8\") layers, including ramming & dressing the surface to required levels and slops and also including 1.50 m (5 fts) lift and 30 m (100 fts) lead. The earth from cutting to be used in making filling or to be deposited as spoils banks within 30distance as directed by Engineer-in-charge (Rates excluding royality) Cartage for soil 5 km (S.O.R.-253) |
| 15 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in the proportion of 1:1.5:3 in Foundation in Footing excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and toos and plants etc, required for proper completion of the works.PWD-287(1) |
| 16 | Mild Steel or Iran in plain work such as reinforced concrete or reinforced brick work when not including in an overall rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks. SI No.-504 |
AI Tender Summary
Tender Timeline
Dec 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender